Application of the Cosserat continua to numerical studies on the properties of the materials

The finite element models of Cosserat continuum in two- and three-dimensions are presented. The size effects of a cantilever beam and a micro-rod, the well-posedness, the mesh-independent solutions of the boundary value problems with non-associated elastoplastic and strain softening constitutive behavior, and the progressive failure of the two- and three-dimensional vertical excavations are studied. Numerical results illustrate that the proposed Cosserat continuum models are capable of reflecting the size effects of micro-structures, preserving the well-posedness of the boundary value problem characterized by the strain localization, ensuring mesh-independent solutions, and simulating the entire progressive failure process occurring in engineering structures.     

Photonic Reactions Leading to Fluorescence in a Polymeric System Induced by the Photothermal Effect of Magnetite Nanoparticles Using a 780 nm Multiphoton Laser

Recently, polymer‐coated magnetite (Fe₃O₄) nanoparticles (NPs) are extensively studied for applications in therapeutics or diagnostics using photothermal effect. Therefore, it is essential to understand the interactions between Fe₃O₄ NPs and polymers when optical stimuli are applied. Herein, the photonic reactions of Fe₃O₄ NPs and polymer composites upon application of a 780 nm multiphoton laser are analyzed. The photonic reactions produce unique results including fluorescence from conformationally changed polymer and low‐temperature phase transformation of Fe₃O₄ NPs. Typically, π‐conjugated chains are formed, inducing fluorescence through a series of main and side‐chain cleavage reactions of polymers with the aliphatic chain. In addition, fluorescence is detected in the cellular system by photonic reactions between Fe₃O₄ NPs and biomolecules. After multiphoton laser irradiation, light emission is detected near the intracellular Fe₃O₄ NPs, and a stronger intensity is observed in large‐sized NPs.     

Plasmon enhancement for Vernier coupled single-mode lasing from ZnO/Pt hybrid microcavities

It is essential to develop a single mode operation and improve the performance of lasing in order to ensure practical applicability of microlasers and nanolasers.In this paper,two hexagonal microteeth with varied nanoscaled air-gaps of a ZnO microcomb are used to construct coupled whispering-gallery cavities.This is done to achieve a stable single mode lasing based on Vernier effect without requiring any complicated or sophisticated manipulation to achieve positioning with nanoscale precision.Optical gain and the corresponding ultraviolet lasing performance were improved greatly through coupling with localized surface plasmons of Pt nanoparticles.The ZnO/Pt hybrid microcavities achieved a seven-fold enhancement of intensity of single mode lasing with higher sidemode suppression ratio and lower threshold.The mechanism that led to this enhancement has been described in detail.     

Synthesis of size-controlled CoMn2O4 quantum dots supported on carbon nanotubes for electrocatalytic oxygen reduction/evolution

A combined hot-injection and heat-up method was developed to synthesize monodisperse and uniform CoMn2O4 quantum dots (CMO QDs).CMO QDs with average size of 2.0,3.9,and 5.4 nm were selectively obtained at 80,90,and 105 ℃,respectively.The CMO QDs supported on carbon nanotubes (CNTs) were employed as catalysts for the oxygen reduction/evolution reaction (ORR/OER) in alkaline solution to investigate their size-performance relationship.The results revealed that the amount of surface-adsorbed oxygen and the band gap energy,which affect the charge transfer in the oxygen electrocatalysis processes,strongly depend on the size of the CMO QDs.The CMO-3.9/CNT hybrid,consisting of CNT-supported CMO QDs of 3.9 nm size,possesses a moderate amount of surfaceadsorbed oxygen,a lower band gap energy,and a larger charge carrier concentration,and exhibits the highest electrocatalytic activity among the hybrid materials investigated.Moreover,the CMO-3.9/CNT hybrid displays ORR and OER performances similar to those of the benchmark Pt/C and RuO2 catalysts,respectively,due to the strong carbon-oxide interactions and the high dispersion of CoMn2O4 QDs on the carbon substrate;this reveals the huge potential of the CMO-3.9/CNT hybrid as a bifunctional OER/ORR electrocatalyst.The present results highlight the importance of controlling the size of metal oxide nanodots in the design of active oxygen electrocatalysts based on spinel-type,nonprecious metal oxides.     

Fracture mechanics‐based progressive damage modelling of adhesively bonded fibre‐reinforced polymer joints

A quasi‐static progressive damage model for prediction of the fracture behaviour and strength of adhesively bonded fibre‐reinforced polymer joints is introduced in this paper. The model is based on the development of a mixed‐mode failure criterion as a function of a master R‐curve derived from the experimental results obtained from standard fracture mechanics joints. Consequently, the developed failure criterion is crack‐length and mode‐mixity dependent, and it takes into account the contribution of the fibre‐bridging effect. Energy release rate values for adhesively bonded double‐lap joints are obtained by using the virtual crack closure technique method in a finite element model, and the numerically obtained strain energy release rate is compared to the critical strain energy release rate given by the mixed‐mode failure criterion. The entire procedure is implemented in a numerical algorithm, which was successfully used for predicting the strength and R‐curve response of adhesively bonded double‐lap structural joints made of pultruded glass fibre‐reinforced polymers and epoxy adhesives.     

Numerical simulation of prestrain history effect on ductile crack growth in mismatched welded joints

Pipe reeling may lead to plastic pre‐deformation (prestrain) around existing cracks in components; therefore, investigating whether this process accelerates or counteracts ductile crack growth, especially for strength mismatched welded joints, is warranted. This study focused on the effect of prestrain history on ductile crack growth in mismatched welded joints. A single‐edge‐notched tension specimen was selected for numerical study, and the crack was assumed to have existed before a prestrain history was applied. Crack growth resistance curves for plane strain and mode I crack growth under large‐scale yielding conditions have been computed using the complete Gurson model. Meanwhile, symmetrical and non‐symmetrical prestrain cycle modes with different loading levels were applied to the overmatched specimens. The outcome demonstrated that the mismatch ratio (the ratio between the yield stress of the weld metal and base metal) showed a significant effect on fracture resistance regardless of the stage at which the prestrain cycle loading was located. By contrast, the processing of the crack growth was weakened by the increase of prestrain values, and the symmetrical prestrain cycle resulted in greater plastic damage than the non‐symmetrical prestrain cycle did. However, the initial crack length had a non‐significant effect on the ductile fracture considering the prestrain and mismatch effects.     

Fracture investigation of U‐notch made of tungsten–copper functionally graded materials by means of strain energy density

The averaged strain energy density over a well‐defined control volume was employed to assess the fracture of U‐notched specimens made of tungsten–copper functionally graded materials under prevalent mode II loading. The boundary of control volume was evaluated by using a numerical method. Power law function was employed to describe the mechanical properties (elasticity modulus, Poisson's ratio, fracture toughness and ultimate tensile stress) through the specimen width. The effect of notch tip radius and notch depth on notch stress intensity factors and mode mixity parameter χ were assessed. In addition, a comparison based on fracture load between functionally graded and homogeneous W–Cu was made. Furthermore, in this research, it was shown that the mean value of the strain energy density over the control volume can be accurately determined using coarse meshes for functionally graded materials.     

Non-local line method for notched elements with use of effective length calculated in an elasto-plastic condition

The paper presents a non-local line method used to the fatigue life calculation of notched elements. The presented method is based on the concept of an effective length which determines the size of the equivalent fatigue zone. Effective values of normal stress calculated in the critical plane with a weight function were applied when determining the equivalent fatigue zone. Simulation studies were performed for two types of steel and two types of loading. Five different series of tests and simulations were used. Experimental studies were carried out for 40 HM-T and EA4T steels. These materials are used in railway industry, including the manufacturing of coupling bars. The notched test specimens contained notches with a tip radius of 0.2, 0.5, 0.8 and 1 mm. Stress calculations were performed using the finite element method by adopting cyclic material properties described by the model of a multi-linear hardening. Non-local calculations were performed in a defined critical plane for normal stress distribution and a weight function. As a result, the function of variation of the effective length depending on the loading level and geometry of the notch has been determined.