Analysis of damage localization for ductile metal in process of shear band propagation

1 Introduction Shear localization is an important and often dominating deformation and failure mechanism for Ti and Ti alloy in dynamic loadings[1—10]. The eventual outcome of localized deformation is ductile rupture and material separation. Shear locali…     

PBX炸药细观损伤的实验研究

为研究PBX炸药在冲击作用下的物理损伤、化学损伤及成热的物理机制,采用炸药爆炸驱动隔板实验技术对PBX炸药进行了冲击压缩实验,回收炸药试样并对其不同位置处的断面形貌进行SEM分析.结果表明,随着冲击能量的增加,其温度效应的影响越来越显著,损伤模式从物理损伤向化学损伤过渡.这为XDT问题中的"热点"形成机制等研究提供了实验基础.     

应用化学专业实践教学模式初探

介绍了以江西农业大学理学院基础化学实验室为基础,以2002级应化专业学生为对象,以培养具有“基础扎实、知识面广、能力强、素质高”的优秀化学人才为目标,改革应用化学专业实践教学内容和方法,改善实验条件.     

水工隧洞地震作用计算模型的适用性研究

针对水工隧洞在地震作用下的计算问题,对水工隧洞地震作用计算模型进行了计算对比和适用性研究。分析常用的4种计算模型用于计算水工隧洞地震作用的可行性,通过理论和数值计算确定"径向和切向反力弹簧模型"的计算参数,研究了地震作用下隧洞上方计算土体对隧洞衬砌的作用方式。结合试验验证,该方法和数值计算对比的结果表明:围岩的法向和切向弹性抗力系数受隧洞埋深、围岩类型和衬砌不同部位的影响,随埋深的增加先增大,然后趋于一个定值,围岩条件越好,数值越大,在隧洞两侧部位的数值较大;在地震作用下,隧洞上方计算土体以切向力的方式作用在隧洞衬砌的上半部分,可以通过将隧洞上部计算土体分条后进行计算。该方法可充分考虑地震对隧洞的动力和约束作用,适用于水工隧洞抗震计算。     

JS118的杀虫活性与作用方式研究

室内生物测定研究了JS118的触杀、胃毒、拒食、内吸活性。结果表明(1)JS118对棉铃虫有明显的触杀活性和胃毒活性,对棉铃虫6龄幼虫的触杀毒力、胃毒毒力和综合毒力分别为2.486 mg/pest、0.606 mg/pest和0.4856 mg/pest。(2)JS118对试虫无明显的驱避效果。24 h内对试虫的取食影响不明显,但在24 h后,抑制试虫进食。(3)JS118无明显的根内吸活性。     

Finite-time coordination in multiagent systems using sliding mode control approach

Finite-time stability in dynamical systems theory involves systems whose trajectories converge to an equilibrium state in finite time. In this paper, we use the notion of finite-time stability to apply it to the problem of coordinated motion in multiagent systems. Specifically, we consider a group of agents described by fully actuated Euler–Lagrange dynamics along with a leader agent with an objective to reach and maintain a desired formation characterized by steady-state distances between the neighboring agents in finite time. We use graph theoretic notions to characterize communication topology in the network determined by the information flow directions and captured by the graph Laplacian matrix. Furthermore, using sliding mode control approach, we design decentralized control inputs for individual agents that use only data from the neighboring agents which directly communicate their state information to the current agent in order to drive the current agent to the desired steady state. Sliding mode control is known to drive the system states to the sliding surface in finite time. The key feature of our approach is in the design of non-smooth sliding surfaces such that, while on the sliding surface, the error states converge to the origin in finite time, thus ensuring finite-time coordination among the agents in the network. In addition, we discuss the case of switching communication topologies in multiagent systems. Finally, we show the efficacy of our theoretical results using an example of a multiagent system involving planar double integrator agents.     

Failure mode and effects analysis using D numbers and grey relational projection method

Failure mode and effects analysis (FMEA) is a widely used risk assessment tool for defining, identifying and eliminating potential failures or problems in products, process, designs and services. Two critical issues of FMEA are the representation and handling of various types of assessments and the determination of risk priorities of failure modes. Many different approaches have been suggested to enhance the performance of traditional FMEA; however, deficiencies exist in these approaches. In this paper, based on a more effective representation of uncertain information, called D numbers, and an improved grey relational analysis method, grey relational projection (GRP), a new risk priority model is proposed for the risk evaluation in FMEA. In the proposed model, the assessment results of risk factors given by FMEA team members are expressed and modeled by D numbers. The GRP method is used to determine the risk priority order of the failure modes that have been identified. Finally, an illustrative case is provided to demonstrate the effectiveness and practicality of the proposed model.     

基于运动相关皮层电位握力运动模式识别研究

面向基于脑-机接口（Brain-computer interface,BCI）的脑-机交互控制（Brain-machine interaction control,BMIC）——直接脑控机器人,提出一种新的左、右手握力运动参数范式,在该范式下探索左、右手握力运动相关皮层电位/运动相关电位（Movement-related potentials,MRPs）的时域特征表示并识别握力运动模式.在涉及左、右手4个不同任务的实验中采集了11个健康被试的脑电信号,任务期间要求被试以2种握力变化模式之一完成自愿握力运动,每种任务随机重复30次.不同握力任务之间具有显著差异的运动相关电位特征用于识别握力运动模式.分别用基于核的Fisher线性判别分析和支持向量机识别4个不同的握力运动任务.研究结果进一步证实运动相关电位可以表征握力运动规划、运动执行和运动监控的脑神经机制过程.基于核的Fisher线性判别分析和支持向量机分别获得24±4%和21±5%的平均错误分类率.最小误分类率是12%,所有被试平均最小误分类率为20.9±5%.与传统的仅仅识别参与运动的肢体类型以及识别单侧肢体运动参数的研究相比,本研究可望为脑-机交互控制/脑控机器人接口提供更多的力控制意图指令,奠定了后续的对比研究基础.     

Relationship between Viscoelastic and Peeling Properties of Model Adhesives. Part 1. Cohesive Fracture

The viscoelastic and peeling properties of polybutadiene/tackifying resin compatible blends have been studied in detail. Viscoelastic properties have been described through the variations of the complex shear modulus, G*(ω), as a function of frequency, ω and peeling properties through the variations of peeling force (F) as a function of peeling rate (V).

After showing the objective character of the peeling curves obtained, the variations of the peeling force and peeling geometry have been studied as a function of volume fraction of the tackifying resin.

In this first paper, the analysis is focused on the first domain of the peeling curves, i.e. the cohesive fracture region. In this region, the peeling properties have been related to the viscoelastic properties in the terminal region of relaxation. It is shown that the longest relaxation time, τ_o, is a reducing parameter of the peeling curves, so a peeling master curve-which is independent of temperature, resin volume fraction and polymer molecular weight-may be defined. Furthermore, the variations of the test geometry as a function of peeling rate have been investigated: the variations of the radius of curvature of the aluminium foil have been analyzed with respect to the viscoelastic behavior of the adhesive, which in fact governs the test geometry.

A detailed analysis of all these features leads to a model which allows one to calculate the peeling curves in the cohesive domain from the adhesive formulation.     

基于并查集和边缘检测模板的非理想虹膜定位

非理想虹膜图像往往存在虹膜边缘模糊、灰度变化不均匀、位置偏移及光斑干扰等问题, 这些问题的存在会在一定程度上影响虹膜内、外边界定位的准确率. 针对这个问题, 本文提出采用并查集和边缘检测模板的方法来对非理想虹膜进行内、外边界定位. 内边界定位是首先采用并查集方法完成瞳孔区域粗定位, 然后采用Hough变换对瞳孔进行精确定位; 外边界定位是先利用一系列边缘检测模板大致确定外圆的位置, 然后再依据外边界附近圆环内边缘点的密度来最终完成外边界的精确定位. 实验结果表明, 对于非理想虹膜图像, 本文方法的定位正确率和定位速度均高于其他同类方法.