基于人工智能的钛合金热变形工艺参数优化

在深入分析热变形工艺参数对Ti-15-3合金显微组织及成形载荷的影响的基础上,以变形温度、变形程度和变形速率等热变形工艺参数作为设计变量,以显微组织和成形力的最佳综合为目标,建立了该合金热塑性成形工艺参数的多目标优化数学模型。以显微组织参数和成形力的人工神经网络预测模型作为优化算法的知识源,将人工神经网络与修正的遗传算法相结合,对Ti-15-3合金的热塑性成形工艺参数进行优化。结果表明,提出的修正的遗传算法是有效的,采用将其与人工神经网络相结合的方法对钛合金的热塑性成形工艺参数进行优化是可行的。     

改性BMI微孔轴承保持器材料研究

采用改性双马来酰亚胺树脂制备微孔轴承保持器材料，探讨了制备工艺和最佳工艺参数，得到性能优良的改性双马来酰亚胺微孔轴在保持器材料。     

三聚氰胺改性脲醛树脂粉体胶粘剂的研制

用三聚氰胺改性脲醛树脂改善了胶粘剂的耐沸水性,并有效地降低了游离甲醛含量。三聚氰胺改性脲醛树脂粉体胶粘剂应用更广泛,性能更可靠。     

SBS改性沥青

介绍了沥青的特性，改性沥青的种类与性能，以及丁苯嵌段共聚物改性沥青的相容性，溶胀性，分散性等方面的研究进展，并提出了发展建议。     

High resolution XPS characterization of chemical functionalised MWCNTs and SWCNTs

High resolution XPS analysis of chemical functionalised multi-wall carbon nanotubes (MWCNTs) and single wall carbon nanotubes (SWCNT) was done with ESCA300 (overall instrument resolution of 0.35 eV). Information to the degree of functionalisation was ascertained by argon ion bombardment of the samples followed by XPS analysis to detect the functional groups, the percentage atomic concentration of various elements present and whether or not the detected functional groups imposed a chemical shift on the CNT atoms. The results show that true chemical functionalisation was achieved and by argon ion bombardment these functional groups can be altered relative to the C 1s carbon atoms of the CNT. The choice of chemicals used for functionalisation, the techniques employed and the types of nanotubes treated are important factors in chemical characterisation. The carbon atom on the nanotube ring to which the functional group (atom) is bonded, the chirality of the CNT, the electronegativity of the functional group, the bond type and whether the CNT is single-wall or multi-wall, or cut (short) could play a role in determining the chemical shift on the CNTs atoms. These investigations are relevant to chemical functionalisation of carbon nanotubes for various applications for example DNA sensors and other biomedical sensors.     

110 dtex/36f抗菌POY纺丝工艺研究

讨论了干燥温度、纺丝温度、冷却成形条件等对纺丝的影响。指出预结晶温度为160℃,干燥温度为145℃时,干燥效果较好。螺杆各区温度比常规纺丝时低10℃,纺丝顺利。侧吹风速0.37m/s,风温25℃,风湿75%,丝条稳定;上油率达0.9%时,集束性较好。此抗菌纤维抑菌率达99.99%以上。     

有机试剂结构与性质的研究：Ⅻ.有机试剂的pKa与改进的Hammett方程

有机试剂的ｐＫａ是其重要物化参数，是有机试剂酸碱性的度量，直接决定配合物的稳定性。应用改进的Ｈａｍｍｅｔｔ方程处理取代基常数与ｐＫａ的关系，得到满意的结果。     

高强度快干变性淀粉粘合剂的研究及在纸制品包装中的应用

本文介绍了高强度快干变性淀粉的制备原理和工艺,以及用该变性淀粉调配瓦楞纸板用粘合剂的方法和应用情况。讨论了变性淀粉粘合剂的初粘力,干燥速度等并与普通淀粉粘合剂作了比较。     

改性聚丙烯酰胺水溶液的疏水缔合性质

合成了一种疏水缔合水溶性聚丙烯酰胺共聚物，使用荧光光谱法并结合紫外及流变性实验，对制备的疏水缔合水溶性聚丙烯酰胺共聚物在水溶液中形成疏水微区、超分子聚集体及空间网络结构进行了研究，并用扫描电子显微镜证实了溶液中网络结构的存在．     

Electrochemical preparation of epinephrine/Nafion chemically modified electrodes and their electrocatalytic oxidation of ascorbic acid and dopamine

Two types of epinephrine and cyclized epinephrine quinone films have been prepared using cyclic voltammetry from the epinephrine in the strong acidic solutions and neutral aqueous solutions over different scanning potential ranges. The cyclic voltammogram of the epinephrine film is characterized by one redox couple at about +0.5 V (versus Ag|AgCl) and cyclized epinephrine quinone film exhibits one redox couples at about −0.15 V (versus Ag|AgCl) .In addition to cyclic voltammetry and an electrochemical quartz crystal microbalance (EQCM) were used to study the growth mechanism of the epinephrine and cyclized epinephrine quinone molecules. The electrocatalytic oxidation of catecholamines (dopamine and norepinephrine) and also ascorbic acid were investigated in acidic aqueous solutions using epinephrine films. The rotating ring-disk electrode technique was used to investigate the mechanism of electrochemical oxidation of dopamine and ascorbic acid.