Finite Element Analysis of a Moving Boundary Value Problem

A finite element formulation and the solution of a set of nonlinear coupled heat and mass transfer equations for a two-phase system with a moving evaporation interface is presented. The interface condition takes into account the moisture transfer balance at the moving boundary. The finite element results were compared with existing results for a single phase system for model validation. In the two-phase system, the movement of evaporation front has an appreciable effect on the temperature and moisture distribution inside the porous medium during drying. The effect of the nondimensional heat of vapourization parameter γ on the evaporation front, temperature and moisture distribution in porous medium was studied. The higher the value of γ, the slower is the movement of the evaporation front. The temperature decreased and the moisture content increased as the nondimensional vapourization parameter γ increased. This model has potential applications in studying the heat and mass transfer characteristics in food and biomaterials.     

上下行信号平衡与蜂窝小区设计

本文从无线电通信基本要素出发 ,阐述上行信号和下行信号的无线传播 ,得出上下行信号平衡链路方程 ,并以我国普遍使用的TACS系统和GSM系统为例 ,着重讨论了信号平衡与蜂窝小区设计之间的关系。     

CAD OF MILLIMETER WAVE OSCILLATORS WITH THE FDHB TECHNIQUE

In this paper the modelling, analysis and optimization of millimeter wave oscillatorsare investigated by using the a frequency-domain harmonic balance technique (FDHB), where theexternal-circuit impedances looking outside from the active device are calculated with a combinedtechnique of modes expansion, Galerkin, and collocation methods. The optimization results arein agreement with the experimental ones, which show the reliability of the presented model andoptimization.     

Heat and Moisture Transfer in Wet Sand Exposed to Solar Radiation—Models and Experiments Concerning Buried Objects

One promising method of locating buried objects, such as land mines, is to use optical systems for detecting contrasts in surface temperature. With enhanced knowledge about the interacting physical processes behind these temperature contrasts, it is possible to improve detection precision. In such a context, moisture movement in the soil and moisture evaporation from the surface have been found to be of particular interest. This study was based on indoor experiments on wet and dry sand exposed to radiation from a solar panel. Simulations of heat and moisture transfer conducted with a one-dimensional model are also presented for the experiments. The calculations were successful in accurately predicting surface temperatures for both wet and dry sand, making it possible to predict surface temperatures under different conditions. These findings will contribute to increasing the probability of successful detection of buried objects under real conditions using optical methods.     

微机核子秤在大型尿素装置中的应用

介绍了大型尿素装置中微机核子秤的系统构成，测量原理、安装、调校及在调试过程中发现的问题。     

Three‐dimensionally braided carbon fiber–epoxy composites,a new type of material for osteosynthesis devices. I. Mechanical properties and moisture absorption behavior

In recent years, three‐dimensionally (3D) braided composites have attracted a great deal of attention because of their high‐impact damage tolerance and fatigue life, superior fracture toughness, and so forth, and have been used in aeronautics, military, and transportation. These advantages make them strong candidates for osteosynthesis devices. In this study, 3D braided carbon fiber–epoxy (C_3D/EP) composites were produced via a simple vacuum impregnation technique. The load‐deflection curve, mechanical properties, and influence of fiber volume fraction, braiding angle, and axial reinforcing fibers were examined to determine their suitability for internal fixation devices. It is found that the C_3D/EP composites have excellent toughness and do not show brittleness when fractured because of their relatively high void content. The flexural, shear, and impact strengths of the C_3D/EP composites are excellent. It was shown that a C_3D/EP composite with a stiffness similar to load‐bearing bones can be made while maintaining enough strength. It is concluded that a relatively higher void content and braiding angle is more suitable for the C_3D/EP composites from the viewpoint of requirements of fracture fixation materials. The moisture absorption behavior and changes in mechanical properties caused by moisture uptake were evaluated. Results show that absorbed moisture slightly decreases mechanical properties of the C_3D/EP composites. Contrary to the unreinforced epoxy, the moisture absorption behavior of the C_3D/EP composites cannot be described with Fick's law of diffusion, probably because of the presence of voids and/or 3D fiber structure. The exact mechanisms should be proposed in further investigations. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 1031–1039, 2002     

对HIC试验中两种不同腐蚀介质酸碱度的探讨

HIC是腐蚀试验中常用的检测方法,用来测评材料在含硫化氢环境中对氢离子敏感性大小.其包含两种不同的腐蚀介质,不同的腐蚀介质中酸碱度是不一样的,腐蚀介质的酸碱度对试验结果有较大的影响,为此,运用电离平衡理论,计算并分析两种不同腐蚀介质电离平衡前后的氢离子浓度变化,得出动态反应平衡时氢离子浓度的关系式,从而获得介质中精确的氢离子浓度,并对腐蚀介质中相关离子进行了探讨,为进一步探究相关环境中的腐蚀机理提供了依据.     

Assessment of Capillary Rise from Shallow Groundwater by the Simulation Model SIMWASER Using Either Estimated Pedotransfer Functions or Measured Hydraulic Parameters

The performance of the water balance and crop growth model SIMWASER to estimate the water supply of a lawn by capillary rise from shallow ground water was investigated by using lysimeter measurements with a sandy and a clayey soil. Moreover the robustness of the model was evaluated by running it either with measured hydraulic soil parameters or with estimated pedotransfer functions (PTFs) derived from texture and bulk density. Simulations were performed for the years 1996–1998 with input data from the lysimeter station Berlin-Dahlem (Germany) for lysimeters containing undisturbed sandy or clayey soil monoliths, with groundwater at 135 cm depth. Simulated evapotranspiration and percolation/capillary rise were in good agreement with the measured data for all variants, while simulated soil water storage was acceptable only for the variants using hydraulic soil data based on laboratory measurements or using PTFs derived from known soil class and bulk density. PTFs based on mean total pore volume of the respective soil classes yielded soil water storages which were evidently too high; therefore they should be used with care and must be avoided at all in simulating the soil water balance of arid sites with shallow groundwater.     

Evaluation of a system of wind tunnels for field studies of ammonia loss from grassland through volatilisation

Rates of ammonia (NH₃) loss from a ryegrass sward measured using a system of small wind tunnels were compared with concurrent measurements made using a micrometeorological mass balance method. Measurements were made during two experiments within a circular plot (radius 10m) treated with urea at a rate of 200kgNha^?1. In the first experiment, air speed through the tunnels was adjusted as necessary to maintain a value of approximately 1ms^?1. This value differed on most occasions from the mean ambient wind speed which was measured at a height of 250mm and which ranged from 0.61 to 2.95ms^?1. Rates of loss measured using the wind tunnels differed by a factor of between two and five from those measured using the mass balance method; there was no consistent pattern in the differences between the rates of loss. The total losses of NH₃ measured during 15 days were equivalent to 49.1 and 30.2kg Nha^?1 for the mass balance and wind tunnel methods, respectively. In the second experiment, air speed through the tunnels was adjusted as necessary to maintain a value as close as possible to the mean ambient wind speed measured at a height of 250mm. Rates of NH₃ loss measured using the two methods did not differ significantly; total losses of NH₃ during 17 days were equivalent to 96.9 and 101kg Nha^?1 for the mass balance and wind tunnel methods, respectively. The difference between the findings of the two experiments could be attributed to the direct effect of air speed through the tunnels rather than to differences between ambient temperatures and those inside the tunnels. During and following periods of rain the rates of loss measured using the tunnels were up to six times greater than those observed with the mass balance method. Rates of loss measured by the two methods became similar again when the tunnels were moved following rain. The study demonstrates that enclosures can be designed and operated to provide reliable measurements of the rate of NH₃ loss from grassland. Potential applications of the two methods are discussed.     

塔河油田特殊钻井条件下的录井技术

该文阐述了定向井、水平井和欠平衡钻井技术对传统录井方法的影响:钻时偏大、失真,岩屑细、代表性差,荧光常达12级、无意义,全烃值一般在5%以上,难以有效划分油气层;指出在特殊钻井条件下掌握设计指导思想,卡准重要层位是录井工作的关键,重点要参考组分分析数据、定量荧光分析数据和综合录井其它信息才能准确识别油气层。