退火温度对掺杂钼板性能的影响

本文简述了退火温度对掺杂钼板的室温抗拉性能、弯曲塑－脆转变温度及室浊反复弯曲性能影响。试样经１３００℃真空退火－小时后，其室温抗拉强度为５８５ＭＰａ，伸长率为３１％，弯曲塑－脆转转变温度低于－７８℃，室浊进反复弯曲９０度的次２１次；经１８００℃退火后，其室温抗拉强度为４９５ＭＰａ，伸长率为４８％，弯曲塑－脆转变温度为４０℃，室温时反复弯曲９０度的次数为６次。     

再谈高速走丝线切割机断丝原因的分析及对策

针对高速走丝电火花线切割加工的断丝问题，从各个方面补充分析了线切割加工中的断丝原因及解决方法，这些方法能切实有效地减少断丝的发生。     

卡尔曼滤波分光光度法同时测定钛锡钼钨

以两性表面活性剂溴化十六烷基二甲基氨基乙酸作为新增效试剂，研究了钛、锡、钼、钨邻氯苯基荧光酮显色体系的光度性质，并用卡尔曼滤波分光光度法进行同时测定。合成试样中钛、锡、钼、钨的回收率范围及相对标准偏差分别为９６．２％～１０６．３％、９６．７％～１０４．５％、９２．２％～１０７％、９７．７％～１０５．６％和３．７６％、３．２４％、５．０９％、２．８１％；合金钢样中微量钛、锡、钼、钨测定的相对误差为５．０％～１１．８％。     

Supported Molybdenum Carbides Lie Between Metallic and Sulfided Catalysts for Deep HDS

Hydrodesulfurization (HDS) of 4,6-dimethyldibenzothiophene on alumina-supported Mo₂C has been studied. These catalysts are stable and active under deep HDS conditions (0-250 wt ppm S). However, although they are well known to have hydrogenation properties, they lead preferentially to a non-hydrogenated product of the HDS reaction: dimethylbiphenyl. For the same reaction, supported platinum and sulfided molybdenum oxide lead to the hydrogenated products dimethyldicyclohexyl and methylcyclohexyltoluene, respectively. The ranking of HDS activity is as follows: MoS₂/Al₂O₃ < Mo₂C/Al₂O₃ < Pt/SiO₂.     

Molybdenum Oxycarbide and Tungsten Oxycarbide Coatings on Silicon Carbide Fibers

The strength and toughness of fibrous composites depend on the interface properties which control the bonding between the fibers and matrices. One method of controlling the interface involves coating the fiber with an appropriate material. In a previous study, it was found that there is a definite advantage in using low coating temperatures to prevent fibers from degrading. We therefore were interested in a report that Mo₂C could be deposited from Mo(CO)₆ at temperatures as low as 300° to 475°C. Our studies indicated that the material was not Mo₂C, but an oxycarbide, which, with an analogous tungsten oxycarbide coating, was applied to SiC yarns. Both oxycarbides could be converted to the metals by heat-treating in N₂.     

Effect of cobalt oxide on surface structure of alumina supported molybdena catalysts studied by in situ Raman spectroscopy

A set of Co promoted 10% Mo/Al₂O₃ samples have been characterized by means of Raman spectroscopy under ambient as well as in situ dehydrated conditions. Under ambient conditions, the degree of the polymerization of surface molybdenum oxide species decreases with increasing Co loading. Under dehydrated conditions, the polymeric molybdenum oxide species is absent with the addition of only 0.2% Co. At low Co loadings (2%), before the formation of CoMoO₄ compound, the spectral features are very similar under ambient conditions. Dehydration causes the upward shift of the Mo=O symmetric stretching mode. A broad band around 920–930 cm^–1 was thus observed. This band has been suggested to be associated with the Co-Mo interaction species. In contrast to crystalline CoMoO₄, this species shows a reversibility on H₂ reduction-O₂ reoxidation treatments. From the results obtained, it is proposed that cobalt oxide interacts with the most polymerized molybdenum oxide species to form Co-Mo interaction species and/or crystalline CoMoO₄; therefore, the amount of the surface molybdenum oxide species decreases with a change in the molecular structure as a function of the Co concentration.     

Effect of Addition of Oxides on Low-Temperature Oxidation of Molybdenum Disilicide

A type of aluminosilicate that has a good wetting property for molybdenum disilicide (MoSi₂) was added to a MoSi₂ matrix to study the effects on the microstructure and low-temperature oxidation. It was found that the composites had not only good low-temperature oxidation resistance but also high thermal shock resistance when the added oxides formed a network microstructure in the matrix. There was no appreciable oxidation gain for MoSi₂/oxide composites with a network microstructure at 773 K for 2500 h. The results indicate that microstructure design is a simple and effective solution to preventing the low-temperature oxidation of MoSi₂.     

实验室用超高温氢气钼丝炉的研制

通过结构设计和负荷计算，研制出适合于实验室使用的以钼丝为电热体，电熔镁砂或镁铝尖晶石为沪芯材料，H2－N2混合气体为保护气氛和最高使用温度达1950℃的内挂式氢气钼丝炉。     

Catalytic conversion of methane to benzene over Mo/ZSM-5

Dehydroaromatization of methane to benzene occurs over a 2 wt% Mo/ZSM-5 catalyst at 700C under non-oxidizing conditions. Following an initial induction period, during which CH₄ reactant reduces the original Mo⁶⁺ ions in the zeolite to Mo₂C and deposition of coke occurs, a benzene selectivity of 70% at a CH₄ conversion of 8–10% could be sustained for more than 16 h. X-ray photoelectron spectroscopy and X-ray powder diffraction measurements indicate that the reduced Mo is highly dispersed in the channels of the zeolite. Initial activation of CH₄ reactant occurs on Mo₂C sites, leading to the formation of C₂H₄ as the primary product. The latter then undergoes subsequent oligomerization reactions on acidic sites of the zeolite to form aromatic products.     

Methane activation without using oxidants over Mo/HZSM-5 zeolite catalysts

The effect of Mo loading, calcination temperature, reaction temperature and space velocity on the catalytic performance of methane dehydrogenation and aromatization without using oxidants over Mo/HZSM-5 has been studied. The XRD and BET measurements show that Mo species are highly dispersed in the channels of the HZSM-5 zeolite, resulting from the interaction between the Mo species and the zeolite, which also leads to a decrease in its crystallinity. The Brønsted acidity, the channel structure and the state and location of Mo species in the zeolite seem to be crucial factors for its catalytic performance. It was found that 2% Mo/HZSM-5 calcined at 773 K showed the best aromatization activity among the tested catalysts, the methane conversion being 9% at 1013 K with the selectivity to aromatics higher than 90%. The experimental results obtained from the variation of space velocity gave evidence that ethylene is an initial product. On the basis of these results a possible mechanism for methane dehydrogenation and aromatization has been proposed in which both the heterolytic splitting of methane in a solid acid environment and a molybdenum carbene-like complex as an intermediate are of significance.