Partial replacement of EPDM by GTR in thermoplastic elastomers based on PP/EPDM: Effects on morphology and mechanical properties

The formulation of recycled thermoplastic elastomeric materials (TPE) based on ground tyre rubber (GTR), generated from end of life tyres, can be an alternative strategy to deal with a type of waste responsible for increasingly environmental problems over the past decades. The incompatibility of GTR with thermoplastics places several issues on the formulation of these materials, which this study tries to overcome. An encapsulation strategy of the GTR by an elastomeric phase is proposed in this work to overcome the lack of adhesion between the materials. Ternary blends, composed of a highly flowable polypropylene homopolymer, an ethylene propylene diene monomer (EPDM) and GTR were formulated and their morphology and mechanical properties analyzed. The morphology of the blends showed interaction between the materials, revealing that the encapsulation of GTR by a rubber phase can be an adequate strategy to formulate recycled‐based TPE materials, if the dimension of the GTR particles is controlled and taken into consideration. The mechanical properties revealed the replacement effect of EPDM by GTR, and its dependence on the amount of that replacement. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40160.     

Solvent diffusion in silica/poly[styrene‐co‐(acrylic acid)] core‐shell microspheres by pulsed field gradient NMR techniques

Polymer‐coated SiO₂ particles are prepared by precipitation of poly[styrene‐co‐(acrylic acid)] on SiO₂ microspheres through an improved phase inversion method. The diffusion resistance of the polymer membrane was considered to be the critical reason for producing tailor‐made polyethylene by catalysts supported on these polymer‐coated particles. This paper employs pulsed field gradient NMR (PFG‐NMR) to distinguish diffusion of n‐hexane in different regimes, i.e., in the space between each particle, the pores in SiO₂ and the polymer shell, by their respective diffusion coefficients. By varying the observation time, the time scale of the molecular exchange is discussed. A three‐region ansatz was used to interpret the exchange and diffusion in polymer‐coated SiO₂ system, and was compared with results acquired with noncoated particles. At long diffusion times, the mean‐squared displacement, and thus the averaged self‐diffusion coefficient, of hexane in the system of polymer‐coated SiO₂ particles is significantly reduced. The PSA membrane is identified as an efficient barrier against molecular exchange between the pores in SiO₂ and the intraparticle space. Consistently, the relaxation measurements indicated that the mobility of n‐hexane molecules, especially the rotation of n‐hexane, was limited by the PSA membrane. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40160.     

Conductivity and intermolecular interactions in proton‐conducting gel electrolytes

Proton‐conducting gel electrolytes based on poly(methyl methacrylate) (PMMA), poly(vinylidene fluoride) (PVdF), and mixtures of PMMA with PVdF or poly(vinyl chloride) doped by acid solutions in aprotic solvents were synthesized and are discussed in this article. The gel conductivity as a function of the concentrations of acid and polymer and the polymeric matrix composition has been analyzed. Extreme dependence of the conductivity on acid and polymer concentrations was found. It was revealed that within the acid concentration range studied, the gel conductivity was higher than the conductivity of the corresponding liquid electrolytes used for the synthesis. The increase in the electrical conductivity with the growth of the systems viscosity is discussed as an indication of a certain involvement of the polymer matrix in the increase of the charge carrier mobility within the frame of a Grotthuss mechanism. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40674.     

Analysis of polyolefin compositions through near infrared spectroscopy

In this work, NIRS is employed to provide compositions of α‐olefin copolymers, allowing for evaluation of the effects of certain key process variables on the final NIR spectral responses of obtained polymer materials. This work also introduces a new temperature programmed analytical technique, which combines NIRS measurements with partial fractionation of α‐olefin copolymers. The new proposed technique can be used for evaluation of polyolefin compositions, as presented here for poly(propene/1‐butene) copolymers. Besides, preliminary results obtained from thermal fractionation experiments indicate that this new proposed experimental technique can be employed for characterization of comonomer sequence distributions of α‐olefin copolymers. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40127.     

Soluble‐eggshell‐membrane‐protein‐modified porous silk fibroin scaffolds with enhanced cell adhesion and proliferation properties

In this study, a porous silk fibroin (SF) scaffold was modified with soluble eggshell membrane protein (SEP) with the aim of improving the cell affinity properties of the scaffold for tissue regeneration. The pore size and porosity of the prepared scaffold were in the ranges 200–300 μm and 85–90%, respectively. The existence of SEP on the scaffold surface and the structural and thermal stability were confirmed by energy‐dispersive X‐ray spectroscopy, X‐ray diffraction, Fourier transform infrared spectroscopy, differential scanning calorimetry, and thermogravimetric analysis. The cell culture study indicated a significant improvement in the cell adhesion and proliferation of mesenchymal stem cells (MSCs) on the SF scaffold modified with SEP. The cytocompatibility of the SEP‐conjugated SF scaffold was confirmed by a 3‐(4,5‐dimethyltriazol‐2‐y1)‐2,5‐diphenyl tetrazolium assay. Thus, this study demonstrated that the biomimic properties of the scaffold could be enhanced by surface modification with SEP. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40138.     

How Different Characterization Techniques Elucidate the Nature of the Gold Species in a Polycrystalline Au/TiO2 Catalyst

TiO₂‐supported gold species were prepared via the deposition‐precipitation route, with conservation of the initial speciation by freeze‐drying. The structural and electronic properties of the Au species were investigated by X‐ray absorption spectroscopy, electron microscopy, and IR spectroscopy of adsorbed CO in four states. Exclusively Au^III was deposited on the TiO₂ surface in patches ranging from isolated Au ions to three‐dimensional clusters. This paper illustrates in detail the unique contributions of all characterization techniques to this structural model.     

Influence of change in ether structure on the low temperature dielectric relaxation of some poly(ether imide)

Broad band dielectric relaxation spectra are reported on a range of polymers created by varying the ether segment in a series of poly(ether imide)s. Changes in the structure allow the effects of steric constraints on the local conformational dynamics of the polymer chain to be explored. These changes have a significant effect on the glass transition temperatures of these polymers which range from 245 to over 420°C. In contrast, the low temperature dielectric relaxation behavior of these polymers is very similar and is attributed to cooperative local oscillatory—librational motions. Changes in the stereochemistry effect the amplitude, activation energy for the relaxation process, the packing chain density, and values of the high frequency limiting permittivity, ε_∞′. This latter parameter is sensitive to the extent of dipole induced dipole and π‐π electron interactions and is influenced by the packing density. The magnitude of ε_∞′ is a very important parameter in determining the suitability of poly(imide)s for electrical applications. The magnitude of ε_∞′ increases with the density; however, deviations from this general trend are observed when large nonpolar groups inhibit the interaction of neighboring chains. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 41191.     

Gradient and weather resistant hybrid super‐hydrophobic coating based on fluorinated epoxy resin

A weather resistant super‐hydrophobic coating that can offer good substrate adhesion and yet to be easily processed at large scale can be of practical use in emerging fields of self‐cleaning and anti‐icing paint, combing all these properties together remains challenging task. Here we describe a composite coating composed of a fluorinated epoxy resin emulsion with embedded in situ surface‐modified dual‐scale nano‐silica, which displayed durable super‐hydrophobicity and excellent adhesive strength. The as‐prepared coating possesses water contact angle of 158.6 ± 1°, sliding angle around 3.8 ± 0.2° which remain stable even under acidic/alkaline, heat/cool, and accelerated aging treatment. The results demonstrate that surface roughness had a micron‐ and nanometer scale distribution with increased particle loading beyond 40 wt %. Through quantitative comparison of surface Attenuated Total Reflection (ATR) with bulk FT‐IR transmission spectra, a gradient coating with surface enrichment of hydrophobic groups was determined. The air‐side fluorinated polysiloxane‐rich layer endows coating with weather‐resistance and ultra‐hydrophobicity while bottom epoxy resin layer enhances substrate adhesion. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40955.     

Cell morphology,bubbles migration,and flexural properties of non‐uniform epoxy foams using chemical foaming agent

Epoxy foams with different densities and microstructures were prepared by changing the process parameters including the foaming temperature, chemical foaming agent (CFA) content and precuring extent. The microstructure of foams reveals a smaller cell size, higher cell density, and more homogeneous distribution of cells at higher precuring extent. However, the cell size and distribution are not affected by the foaming temperature and CFA content without precuring process. In addition, the bubbles migration, which resulted in non‐uniform cell density distribution, was promoted by increasing the foaming temperature and depressed by increasing the CFA content and precuring extent. The flexural properties of the non‐uniform epoxy foams were also studied. Results showed that the flexural modulus was related to the cell morphology, while the flexural strength was affected by both the cell morphology and the position of the specimens during test. It was also found that the relative flexural modulus and strength exhibited a power‐law dependence with respect to the relative density. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 41175.     

Meticulous analysis and consequences of microstructure changes on melt rheology and dynamic viscoelasticity of thermoplastic vulcanizates upon reprocessing

Thermoplastic vulcanizates (TPVs), which are a special class of elastomer alloy, prepared by dynamic vulcanization possess unique morphology of finely dispersed micron‐size cross‐linked elastomeric particles in a continuous thermoplastic matrix. The present study investigates the microstructure formation of elastomeric phase and its associated morphological changes during reprocessing of TPVs based on poly[styrene‐b‐(ethylene‐co‐butylene)‐b‐styrene] triblock co‐polymer (S‐EB‐S) and solution polymerized styrene butadiene elastomer (S‐SBR) by scanning electron microscopy and atomic force microscopy. Semi‐efficient and efficient sulfur‐based curing systems have been adopted to cure the elastomeric phase and a comparative study has been made to demonstrate and explain the effect of reprocessing on the melt rheology and dynamic viscoelasticity of the TPVs. The present work also provides a better insight and guidance to control the microstructure of the cross‐linked elastomeric phase to prepare selectively co‐continuous or dispersed phase morphology. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 41182.