Curing characteristics,morphology, thermal stability,mechanical properties,and irradiation resistance of methylethylsilicone/methylphenylsilicone rubber blends

Methylethylsilicone rubber (MESR)/methylphenylsilicone rubber (MPSR) blends were cured with 2,5‐dimethyl‐2,5‐di(tert‐butylperoxy)hexane. The curing characteristics, morphology, thermal behaviors, mechanical properties at different temperatures, radiation resistance, and thermal aging resistance of the MESR/MPSR blends were investigated. The results show that a high MPSR content could decrease the optimum curing time and improve the scorch safety. Dynamic mechanical analysis revealed that the glass‐transition temperature of the blends increased slightly with the addition of MPSR. Scanning electron microscopy showed that MESR and MPSR had good compatibility in the blends. Thermogravimetric analysis indicated that the thermal stability of the blends increased with increasing quantity of MPSR. The blends had excellent mechanical properties at low temperatures. However, these properties were significantly reduced when the temperature was increased. Moreover, changes in the mechanical properties decreased with increasing MPSR content at high temperatures, especially at temperatures higher than 100°C. In addition, the radiation resistance and thermal aging resistance of the blends increased with increasing MPSR content. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40529.     

CO2 Adsorption capacity of activated N‐doping porous carbons prepared from graphite nanofibers/polypyrrole

In this study, N‐doping porous carbons (NPCs) with a 3D aperiodic hierarchical and layered structure were prepared by the sodium hydride (NaOH) activation of graphite nanofibers (GNFs)/polypyrrole (PPY) composites. The effects of the N groups and structural features on the CO₂ adsorption capacity of NPCs were investigated by N₂ full isotherms, XRD, SEM, and TEM. The CO₂ adsorption capacity was measured by the CO₂ isothermal adsorption at 25°C and 1 atm. It was found that GNFs served as a substrate and layered graphitic carbons were formed by the thermal annealing of PPY. The content of N groups and textural properties of NPCs were enhanced with increasing activation temperature, resulting in improved CO₂ adsorption capacity. The CO₂ adsorption isotherms showed that GPK‐600 exhibited the best CO₂ adsorption capacity of 88.8 mg/g when the activation temperature was 600°C. The result indicates that the pore size and its distribution of NPCs lead to feasible contact CO₂, and the presence of high N groups on the NPCs could have resulted in further stabilization of the surface effect. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40517.     

Study the factors affecting the performance of organic–inorganic hybrid coatings

In this article, a series of hybrid organic–inorganic coatings based on silica‐epoxy composite resins were prepared with the sol‐gel method by using γ‐aminopropyl triethoxysilane as a coupling agent. Especially, the research emphasized on the factors that influenced on the properties of the prepared hybrid coatings. Firstly, epoxy resin was reacted with γ‐aminopropyl triethoxysilane at a specific feeding molar ratio; subsequently, the asprepared sol–gel precursor was cohydrolyzed with tetraethoxysilane (TEOS) at various contents to afford chemical bondings to form silica networks and give a series of organic–inorganic hybrid coatings. They were loaded and cured on steel panels and characterized for FTIR, TGA, DSC, water contact angles (WCA), pencil hardness, surface & three‐dimensional morphological studies, and potentiodynamic polarization tests. The surfaces of the hybrid coatings showed Sea‐Island or Inverting Sea‐Island morphologies at a certain relative content of two components, which made the coatings possess hydrophobic property. Due to the contribution of organic and inorganic components, the prepared hybrid coatings possess a lot of properties such as pencil hardness, thermotolerance, and corrosion resistance. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 41010.     

Development of elastic and plastic properties of polyoxymethylene during bending fatigue

The development of the plastic and viscoelastic properties and the corresponding failure limits of the acetal homopolymer polyoxymethylene were studied in unidirectional cyclic fatigue. Samples with molecular weights (MWs) ranging from 90 to 142 kg/kmol were tested in displacement‐controlled conditions, resulting in maximum stress amplitudes between 30 and 59 MPa and strain amplitudes between 35.8 and 92.6 με. The zero‐hour material properties and the cycle‐dependent property development were predominantly dictated by deformations in the crystalline regions and showed a negligible dependence on MW. However, the final failure limits were found to be primarily dependent on the length of the amorphous tie chains that connect the crystallites. As such, fatigue life analysis showed a strong dependence on MW. Results are interpreted in light of the primary mechanical failure mechanisms and the corresponding molecular deformations. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40762.     

Sequential mixing as effective method in the reduction of percolation threshold of multiwall carbon nanotube in poly(methyl methacrylate)/high‐density poly(ethylene)/MWCNT nanocomposites

This work demonstrates sequential heating protocol to be an effective method in the reduction of percolation threshold of multiwall carbon nanotube (MWCNT) in (70/30 w/w) poly(methyl methacrylate) (PMMA)/high‐density poly(ethylene) (HDPE)/MWCNT nanocomposites. Here, the percolation threshold (P_c) value was reduced to 0.08 wt % of MWCNT, which is the lowest among the ever reported values of P_c for the PMMA system. Moreover, a co‐continuous morphology of the minor HDPE phase was evident throughout the major PMMA phase in a highly asymmetric composition (70/30 w/w) of the blend constituents. The AC conductivity as well as the dielectric permittivity values were increased with increase in loading of MWCNT in the nanocomposites. The detailed analysis of electrical and morphological properties is discussed in depth in the article. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40235.     

Nonsalt 1‐(arylmethyloxy)pyrene photoinitiators capable of initiating cationic polymerization

Analysis of photoproducts derived from 1‐(methoxynaphthalen‐1‐ylmethyloxy)pyrene initiators and polymer end groups demonstrated that methoxynaphthalen‐1‐ylmethyl carbocation is involved in the initiation steps for both styrene (St) and cyclohexene oxide (CHO) polymerization. Charge transfer from the pyrenyloxy oxygen atom to the methoxynaphthalen‐1‐ylmethyl chromophore in the singlet excited state is assumed to be responsible for the efficient generation of the carbocation species, which also initiates the copolymerization of St and CHO. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40510.     

Mo-Ni纳米自组装催化剂的表征与活性评价

以二次纳米自组装氧化铝为载体,浸渍以氨为溶剂、双金属活性组分配比不同的钼镍铵溶液,制备一种新型加氢催化剂,并对制得的催化剂进行表征和评价。结果表明,钼镍催化剂的孔性质稳定,孔径大小集中在3~10 nm和30~100 nm,其中在30~100 nm的孔道占33.70%~39.47%。以劣质催化裂化柴油为原料,对催化剂进行加氢活性评价,催化剂的脱硫率为81%~93%,脱氮率为87%~97%,芳烃饱和率为56%~67%,在催化剂运行时间内无明显结焦现象且活性较好。结合钼镍催化剂的表征数据及加氢活性评价结果发现钼镍质量比为7∶1时催化剂的性质最适宜,并且催化剂活性最优。     

不同形貌纳米氧化锌的制备及其对有机催化反应活性的影响研究进展

纳米氧化锌是沿C轴具有较强极性的极性晶体,改变外部反应条件可以制备出棒状、层状、球状、花状等形貌多样的纳米级氧化锌晶体。近年来很多文献报道不同形貌的纳米氧化锌作为催化剂对甲醇合成、甲醇水蒸气重整制氢、乙醇水蒸气重整制氢等有机催化反应的活性不同。本文综述了反应溶剂、锌源、表面活性剂和pH值等反应条件对纳米氧化锌形貌影响的研究进展以及不同形貌的纳米氧化锌作为催化剂载体或催化剂活性组分对有机催化反应活性的影响。     

Water Content Determinations for Peat and Other Organic Soils Using the Oven-Drying Method

There has been much debate in the literature over the past 60 years regarding an appropriate oven-drying temperature for water content determinations in peat and other organic soils. For inorganic soils, the water content is usually based on the equilibrium dry mass corresponding to drying temperatures in the range 100–110°C. However, for peat and other organic soils, several researchers have recommended lower drying temperatures in the range 60–90°C in an attempt to prevent possible charring, oxidation, and/or vaporization of substances other than pore water. However, all of the relevant water is not fully evaporated at too low a temperature, and because specimen dry mass is a function of drying temperature, the resulting water content values are lower than those determined for the temperature range 100–110°C. Experimental data reported in this article show that oven drying of peat and other organic soils at 100–110°C using either gravity–convection or forced-draft ovens is acceptable for routine water content determinations. Because a standardized oven temperature is desirable when correlating water content with other material properties, it is recommended that oven drying of peat and other organic soils be performed over temperature ranges of either 105–110°C or 105 ± 5°C, in line with standardized ranges for inorganic soils.     

A new strength test for ceramic cylinders—The Notched Roller Test

A new tensile strength test for ceramic rollers (cylinders) is presented, following the idea of the previously published and since that time standardized notched ball test. The specimen is prepared by cutting a long narrow notch along the symmetry plane of the roller, perpendicular to the end faces. By applying compressive forces perpendicular to the notch, tensile stresses are induced in the outer surface region of the roller opposite to the notch, mainly pointing in tangential direction with respect to the roller axis. The stress amplitude is proportional to the applied force and depends also on the test geometry and the Poisson’ ratio, which has been analyzed carefully with FE methods.Strength tests have been performed on two different qualities of commercial silicon nitride rollers of 10 mm diameter and length. According to their specification a significant difference in the strength has been obtained.