A fuzzy neural network approach for online fault detection in waste water treatment process

In this paper, an effective strategy for fault detection of sludge volume index (SVI) sensor is proposed and tested on an experimental hardware setup in waste water treatment process (WWTP). The main objective of this fault detection strategy is to design a system which consists of the online sensors, the SVI predicting plant and fault diagnosis method. The SVI predicting plant is designed utilizing a fuzzy neural network (FNN), which is trained by a historical set of data collected during fault-free operation of WWTP. The fault diagnosis method, based on the difference between the measured concentration values and FNN predictions, allows a quick revealing of the faults. Then this proposed fault detection method is applied to a real WWTP and compared with other approaches. Experimental results show that the proposed fault detection strategy can obtain the fault signals of the SVI sensor online.     

Target detection based on a dynamic subspace

For hyperspectral target detection, it is usually the case that only part of the targets pixels can be used as target signatures, so can we use them to construct the most proper background subspace for detecting all the probable targets? In this paper, a dynamic subspace detection (DSD) method which establishes a multiple detection framework is proposed. In each detection procedure, blocks of pixels are calculated by the random selection and the succeeding detection performance distribution analysis. Manifold analysis is further used to eliminate the probable anomalous pixels and purify the subspace datasets, and the remaining pixels construct the subspace for each detection procedure. The final detection results are then enhanced by the fusion of target occurrence frequencies in all the detection procedures. Experiments with both synthetic and real hyperspectral images (HSI) evaluate the validation of our proposed DSD method by using several different state-of-the-art methods as the basic detectors. With several other single detectors and multiple detection methods as comparable methods, improved receiver operating characteristic curves and better separability between targets and backgrounds by the DSD methods are illustrated. The DSD methods also perform well with the covariance-based detectors, showing their efficiency in selecting covariance information for detection.     

What you get is what you see: revisiting the evaluator effect in usability tests

Usability evaluation is essential to user-centred design; yet, evaluators who analyse the same usability test sessions have been found to identify substantially different sets of usability problems. We revisit this evaluator effect by having 19 experienced usability professionals analyse video-recorded test sessions with five users. Nine participants analysed moderated sessions; 10 participants analysed unmoderated sessions. For the moderated sessions, participants reported an average of 33% of the problems reported by all nine of these participants and 50% of the subset of problems reported as critical or serious by at least one participant. For the unmoderated sessions, the percentages were 32% and 40%. Thus, the evaluator effect was similar for moderated and unmoderated sessions, and it was substantial for the full set of problems and still present for the most severe problems. In addition, participants disagreed in their severity ratings. As much as 24% (moderated) and 30% (unmoderated) of the problems reported by multiple participants were rated as critical by one participant and minor by another. The majority of the participants perceived an evaluator effect when merging their individual findings into group evaluations. We discuss reasons for the evaluator effect and recommend ways of managing it.     

Continuous Self‐Collision Detection for Deformable Surfaces Interacting with Solid Models

In this paper, we propose a new continuous self‐collision detection (CSCD) method for a deformable surface that interacts with a simple solid model. The method is developed based on the radial‐view‐based culling method. Our method is suitable for the deformable surface that has large contact region with the solid model. The deformable surface may consist of small round‐shaped holes. At the pre‐processing stage, the holes of the deformable surface are filled with ghost triangles so as to make the mesh of the deformable surface watertight. An observer primitive (i.e. a point or a line segment) is computed so that it lies inside the solid model. At the runtime stage, the orientations of triangles with respect to the observer primitive are evaluated. The collision status of the deformable surface is then determined. We evaluated our method for several animations including virtual garments. Experimental results show that our method improves the process of CSCD.     

Spline multiresolution and wavelet-like decompositions

Splines are useful tools to represent, modify and analyze curves and they play an important role in various practical applications. We present a multiresolution approach to spline curves with arbitrary knots that provides good feature detection and localization properties for non-equally distributed geometric data. In addition, we show how equidistributed data and knot sequences can be efficiently handled using signal processing techniques.     

三维激光扫描技术在引水隧洞检修中的应用

三维激光扫描技术是国际上近年发展的一项集光、电和计算机技术于一体的新技术,利用该技术可以快速、精确地获取空间数据。锦屏二级水电站引水隧洞放空检修时发现少数洞内存在混凝土破损情况,但受时间与费用等因素限制,难于以采用常规手段详细检查混凝土表面缺陷与变形等问题。通过采用三维激光扫描技术对隧洞进行全断面扫描,及时探查了混凝土表面的缺陷并进行了处理,确保了工程安全运行;同时,还得到混凝土表面的三维坐标信息,建立了混凝土表面缺陷基准数据库,可为后续进一步分析混凝土表面缺陷的变化情况提供参考。     

分光光度法测定饱和盐水中微量杂质

详细描述了用分光光度计测定饱和盐水中的微量铝、硅、铁、碘等杂质的分析方法，利用该方法对饱和盐水进行测定，证明该检测方法简便、快速、实用，能够满足生产需要。     

浅谈汽车四轮定位检测与调整技术

四轮定位对汽车的正常行驶起着十分重要的作用。对汽车四轮定位参数进行检测和调整,不仅能确保汽车的正常行驶,还能延长轮胎的使用寿命,同时节省油耗。重点研究了汽车四轮定位的检测方法和调整技术。