Molecular transport of n‐alkanes into PU/PBMA interpenetrating polymer network systems

The methylene diisocyanate (MDI) and toluene diisocyanate (TDI) based polyurethane/polybutyl methacrylate (PU/PBMA‐50/50) interpenetrating polymer network (IPN) membranes have been prepared. The molecular migration of n‐alkane penetrants such as hexane, heptane, octane, nonane, and decane through PU/PBMA (50/50) membranes has been studied at 25, 40, and 60°C using a weight gain method. From the sorption results, diffusion (D) and permeation (P) coefficients of n‐alkane penetrants have been calculated. Molecular migration depends on membrane‐solvent interactions, size of the penetrants, temperature, and availability of free volume within the membrane matrix. Attempts have been made to estimate the parameters of an empirical equation and these data suggest that molecular transport follows Fickian mode. From a study of temperature dependence of transport parameters, activation energy for diffusion (E_D) and permeation (E_P) have been estimated from the Arrhenius relation. Furthermore, sorption results have been interpreted in terms of enthalpy (ΔH) and entropy (ΔS) of sorption. The liquid concentration profiles have been computed using Fick's equation with appropriate initial and boundary conditions. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 739–746, 2003     

N.m.r. line shape-relaxation correlation analysis of bitumen and oil sands

The first results of the analysis of bitumen and oil sands using the recently developed n.m.r. spingrouping technique are presented. The n.m.r. relaxation experiments were carried out on bitumen, and on natural and dried oil sands samples. The results indicate that the spin-grouping can resolve and quantify several components of the samples studied. The bitumen and bitumen fraction of the oil sands are resolved according to their spin-spin relaxation times into three major groups: solid-like (rigid), solid-like (mobile) and semi-liquid. The water in the oil sands exists in two different environments. Tentatively one environment is assigned to be the bridges between the sand grains, while the other is assigned to be the clay surface. One can conclude that with spin grouping of complex mixtures the decomposition (in which components are resolved according to their dynamic state) is possible. The accuracy of such resolution is of the order of a few per cent.     

Pulsed field gradient n.m.r. measurements and theoretical interpretation of the self-diffusion of polystyrene in solution

The self-diffusion coefficients of polystyrene dissolved in C₆D₆ were measured by means of pulsed field gradient n.m.r.. The dependence on the molecular weight was of the power of -2 in accordance with the reptation model. The concentration dependence was theoretically calculated within the blob concept which shows that in the crossover region the self-diffusion coefficient is determined only by the blob dimensions and the monomeric friction coefficient is constant. The calculated concentration dependence agrees well with that observed by the authors.     

Evaluation of the aromatic structure of coal tar pitch by solid and solution state n.m.r.

Rapid magic angle spinning has been used to obtain sideband-free high field ¹³C n.m.r. spectra of coal tar pitches in the solid state. However, the unfavourable cross-polarization and ¹H relaxation characteristics make it difficult to accurately estimate concentrations of quaternary aromatic carbon using the dipolar dephasing method. The concentrations of bridgehead aromatic carbon in the whole pitch and toluene-insoluble fraction investigated were deduced using a combination of solid and solution state n.m.r. and elemental analyses.     

Core content and stability of n‐octadecane‐containing polyurea microencapsules produced by interfacial polymerization

Microencapsulation of phase change material (PCM) n‐octadecane was carried out by interfacial polymerization technique using core and bulk monomers as toluene‐2,4‐diisocyanate (TDI) and diethylene triamine (DETA), respectively. Cyclohexane was used as the solvent for TDI and n‐octadecane, which formed the oil phase. The effect of encapsulation procedure, core‐to‐monomer ratio (CM ratio) and PCM‐to‐cyclohexane (PC) ratio was investigated on core content, encapsulation efficiency, and stability of microcapsules. Using a modified procedure, the core content was found to increase with the increasing CM ratio and reached a maximum at 3.7, while the encapsulation efficiency continuously decreased with the increasing CM ratio. Also the encapsulation efficiency was found to have a strong dependence on PC ratio and a maximum encapsulation efficiency of 92%, along with the core content of 70% was obtained with CM ratio of 3.7 along with the PC ratio of 6. The microcapsules were well shaped, i.e., round and regular, with narrow size distribution at these conditions. The PCM microcapsules were found to be stable to heat treatment at 150°C for 8 h. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007     

Itaconic Acid Based Surfactants: I. Synthesis and Characterization of Sodium <Emphasis Type="Italic">n</Emphasis>-Octyl Sulfoitaconate Diester Anionic Surfactant

A novel itaconate-based surfactant, namely sodium n-octyl sulfoitaconate diester (SOSID), has been synthesized from itaconic acid (IA) and n-octanol by sulfonation and esterification reaction processes. The effects of reaction temperature, reaction time, molar ratios of n-octanol to IA and the catalyst dosage on the esterification were investigated. The chemical structure of the surfactants SOSID was characterized by means of LC–MS and confirmed by FT-IR and ¹H NMR spectroscopy. The surface tension γ and the critical micelle concentration (CMC) were determined as 25.02 mN/m and 4.0 × 10^?4 mol/L by using surface tensiometer at 20 °C. Further investigations showed that SOSID possess excellent wetting, emulsifying and lime soap dispersing properties.     

Partition of <Emphasis Type="Italic">n</Emphasis>-Butanol Among Phases and Solubilization Ability of Winsor type III Microemulsions

The partition of n-butanol in Winsor type III (W-III) microemulsions was investigated in this work. Three kinds of anionic surfactants (sodium dodecyl sulfate (SDS), sodium dodecyl sulfonate (DSS), and sodium dodecyl benzene sulfonate (SDBS)) and two kinds of anionic/cationic surfactant mixtures (SDS/octadecyl trimethyl ammonium chloride (OTAC) mixtures and DSS/OTAC mixtures) were studied. Internal standard gas chromatography was employed in n-butanol content analysis. The results showed that no water exists in the excess oil (EO) phase and no oil exists in the excess water (EW) phase. For the W-III microemulsions obtained by salinity scanning, relatively constant n-butanol content in the EO (11–12 v%) and EW (1–4 v%) was found under different salinities. Accurate measurement of n-butanol content in each phase is important for those systems having low solubilization ability. For the W-III microemulsions prepared using SDS/OTAC surfactant mixture, the percentage of n-butanol distributed into the interfacial layer decreased while the fraction of n-butanol in the interfacial layer first increased sharply and then tended to be stable with the addition of n-butanol. For the different optimum W-III microemulsion systems tested, most of the surfactant-to-alcohol molar ratio data are near 1:3, but obvious deviation could be observed for some data. On the basis of the accurate measurement of n-butanol content in the EO and EW phases, the standard free energy, ΔG n class="Stack"> _o→in ^* n> (T = 298.15 K) of n-butanol transferring from the EO phase to the interfacial region was calculated. The results show negative ΔG n class="Stack"> _o→in ^* n> values. For microemulsions with the same components, n-butanol content is an important factor influencing the ΔG n class="Stack"> _o→in ^* n> value, and a high absolute value of ΔG n class="Stack"> _o→in ^* n> leads to high solubilization ability.     

Evaluation of a delayed coking process by H and C n.m.r. spectroscopy: 2. Detailed interpretation of liquid n.m.r. spectra

The ¹H and ¹³C nuclear magnetic resonance (n.m.r.) spectra of a delayed coking feedstock and products, presented in a previous paper, are analysed here in detail by matching results from inspection of both nuclei. The conventional spectra of whole samples are used in combination with elemental analysis data, and substantial agreement is obtained. Differences are explored to yield valuable information. Interpretation of some band assignments is modified to account for new results. This approach results in a detailed quantitative estimation of a few key structures that contain the main functional groups that characterize these petroleum fractions.