Solution processable PEDOT:PSS based hybrid electrodes for organic field effect transistors

We report high performance solution processed conductive inks used as contact electrodes for printed organic field effect transistors (OFETs). Poly(3,4-ethylenedioxythiophene): polystyrene sulfonate (PEDOT:PSS) electrodes show highly improved very low sheet resistance of 65.8 ± 6.5 Ω/square (Ω/□) by addition of dimethyl sulfoxide (DMSO) and post treatment with methanol (MeOH) solvent. Sheet resistance was further improved to 33.8 ± 8.6 Ω/□ by blending silver nanowire (AgNW) with DMSO doped PEDOT:PSS. Printed OFETs with state of the art diketopyrrolopyrrole-thieno[3,2-b]thiophene (DPPT-TT) semiconducting polymer were demonstrated with various solution processable conductive inks, including bare, MeOH treated PEDOT:PSS, single wall carbon nanotubes, and hybrid PEDOT:PSS-AgNW, as the source and drain (S/D) electrode by spray printing using a metal shadow mask. The highest field effect mobility, 0.49 ± 0.03 cm² V⁻¹ s⁻¹ for DPPT-TT OFETs, was obtained using blended AgNW with DMSO doped PEDOT:PSS S/D electrode.     

Time-dependent universal conductance fluctuations in IrO2 nanowires

Single-crystalline iridium dioxide nanowires show the time-dependent universal conductance fluctuations (TUCFs) at cryogenic temperatures. The conductance fluctuations persist up to temperature T as high as nearly 10 K. The root-mean-square TUCF magnitudes increase with decreasing T, reaching approximately 0.1 e² / h at 1.7 K. We ascribe these conductance fluctuations to originating from the conduction electrons scattering upon mobile defects (moving scattering centers). Our measured TUCF characteristics are satisfactorily explained in terms of the existing TUCF theory in its three-dimensional form. The extracted electron dephasing length L_φ(1.7 K) ≃90 nm is smaller than the diameter (≈ 180 nm) of our nanowires.     

基于微柱状电极生长ZnO纳米线的研究

利用自己开发的硅衬底电极无催化剂制备横向 ZnO 纳米线网的技术,实现了二维氧化锌纳米线网电路的制备。本论文涉及的技术一方面可以为突破纳电子器件制备极限提供新技术参考。另一方面,去除了纳米线生长过程中的金催化剂污染,降低成本,简化工艺。     

Covalent functionalization of zinc oxide nanowires for high sensitivity p-nitrophenol detection in biological systems

High-quality zinc oxide (ZnO) nanowires were synthesized using the atmospheric chemical vapor deposition technique and were appropriately characterized. Subsequently, the nanowire surface was covalently grafted with 1-pyrenebutyric acid (PBA) fluorophore, and surface-sensitive X-ray photoelectron spectroscopy and Fourier transform infrared-attenuated total reflectance spectroscopy were utilized to confirm the functionalization of 1-pyrenebutyric acid on the nanowire surface. Additionally, photoluminescence (PL) measurements were used to evaluate the optical behavior of pristine nanowires. Through fluorescence quenching of 1-pyrenebutyric acid by p-nitrophenol, a detection limit of 28 ppb was estimated. Based on these findings, ZnO nanowires functionalized with 1-pyrenebutyric acid are envisaged as extremely sensitive platforms for the ultra-trace detection of p-nitrophenol in biological systems.     

Preparation of bismuth nanowire encased in quartz template for Hall measurements using focused ion beam processing

ABSTRACT: Forming electrodes on opposite sides of an individual bismuth nanowire was attempted to prepare for Hall measurements. Although a 1-mm-long bismuth nanowire which is completely covered with a quartz template has been successfully fabricated to prevent oxidation, it is very difficult to attach Hall electrodes on the opposite sides of the nanowire due to the quartz covering. One side of the cylindrical quartz template was removed by polishing without exposure of the nanowire to the atmosphere; the thickness between the polished template surface and the nanowire was estimated to be several micrometers. Focused ion beam processing was successfully employed to expose both surfaces of the nanowire under high vacuum by removing part of the quartz template. A carbon thin film was then deposited in situ on the wire surface to fabricate an electrical contact on the bismuth nanowire sample. Furthermore, the energy dispersive X-ray analysis was performed to the area processed by focused ion beam, and the bismuth component of the nanowire was successfully detected. It was confirmed that the focused ion beam processing was applicable to attach electrodes to bismuth nanowire for Hall measurement.     

Single nanowire assembled by liquid dielectrophoresis for on-chip technologies

ABSTRACT

Study on dynamic tensile properties and atomic chain fabrication of single nanowire, for understanding its dynamic tensile properties and unique physical properties of atomic chain to fabricate atom scale devices, is one of frontier research issues in nano-scale science. However, how to assemble single nanowire on a tensible micro-structure becomes one of the most difficult problems, which severely restricts the development of this research field. In this paper, after the ultrahigh tensible microelectrode chip is fabricated by micro-electromechanical systems technology, hexamethyldisilazane is utilized to improve hydrophobicity of the chip, and then a micro-droplet dielectrophoresis experimental platform and technology is developed to assemble single nanowire on the sensible microelectrode. Experimental results show that accurate and efficient assembly of single Cu nanowire is realized, which contributes greatly to the further research of dynamic tensile properties and atomic chain fabrication. And for guiding the assembly experiments, finite element technology is also utilized to analyze the local micro electro-field around the microelctrodes during dieletrophoresis experiments.     

一种新型SAW气体传感器的设计

提出了将纳米线技术与声表面波(SAW)技术相结合,分别利用纳米线气体敏感材料比表面积高,声表面波传感器质量敏感性高的优点,探索研制新一代声表面波气体传感器。该传感器具有响应速度快,灵敏度高,体积小,质量注和易集成等优点。该文主要从SAW专用芯片的研制、专用纳米线研制、专用纳米线的表面修饰与改性研究、检测电路设计等4方面进行了阐述。理论计算表明,相比传统二维结构的SAW气体传感器,三维纳米线结构的SAW气体传感器的在灵敏度和响应速度上都得到提高。