A New Variable Diffusion Drying Model for the Second Falling Rate Period of Paddy Dried in a Rapid Bin Dryer

The objectives of this article is to propose a new drying model for the second falling rate period known as the variable diffusion controlled period that follows after the first falling rate period and to propose a new method to determine the second critical moisture content that separates these two periods. Experimental work on paddy drying at minimum fluidization velocity was carried out in a rapid bin dryer. The effects of operating temperatures (60-120°C) and bed depths (2-6 cm) on the paddy drying characteristics were investigated. It was found that the normalized drying rate of paddy was proportional to the normalized moisture content in the first falling rate period but in the second falling rate period, the normalized drying rate of the material varies exponentially with the normalized moisture content. The different relationship between the normalized drying rate and the normalized moisture content in the first and second falling rate periods indicate that two different mechanism of moisture transport are at work. The new exponential model of the second falling rate period and the linear model of the first falling rate period were found to fit the experimental data very well. Derivation from variable diffusion equation shows that the linear model is the result of constant diffusion coefficient whereas the new exponential model is the result of linear diffusion coefficient. This also implies that the first falling rate period is a constant diffusion controlled period and the second falling rate period is a variable diffusion controlled period. In addition, drying kinetics data of a drying process that fits the exponential model over a very slow drying period will show that the drying process is under the effect of a linear diffusion coefficient. It was also found that the proposed new method to determine the second critical moisture content that distinguishes between the first and second falling rate periods by using a sudden change in the value of the drying rate gradient to a much lower value at that point is more rigorous and yet simpler than the method of determining the specific location of the receding drying boundary since it is based on the behavior of the actual drying kinetic data.     

Bridging the generation gap between text planning and linguistic realization

Text planning is traditionally done as a separate process, independent of linguistic realization. However, I show in this paper that it is essential for a text planner to know the linguistic consequences of its actions. The choice of how to realize an element affects how much information is conveyed (e.g., “Floyd arrived safely in Boston” vs. “Floyd landed safely at Logan”) and what other information can be added (e.g., “Peter was deciding for an hour” vs. *“Peter made a decision for an hour”). The choice of realization also affects how the relative salience of the elements being expressed will be perceived (e.g., “The green car is in the garage” vs. “The car in the garage is green”). I have defined an intermediate level of representation for text planning, called the Text Structure. It is an abstract linguistic level that reflects germane linguistic constraints while abstracting away from syntactic detail. This representation allows the text planner to have greater control over the decisions, so that it can take advantage of the expressiveness of language to convey subtleties of meaning. More importantly, the Text Structure allows the generation process overall to be incremental, since it ensures that the text plan being composed will always be expressible in the language. La planification de textes est habituellement réalisée séparément, sans tenir compte de la réalisation linguistique. Cependant, ľauteur demontre dans cet article qu'il est essentiel à un planificateur de textes de connai̊tre les conséquences linguistiques de ses actions. Le choix de la méhode de réalisation ?un élément influe sur la quantité?informations qui est transmise (par ex.: 〈〈 Floyd est arrivé sain et sauf à Boston 〉〉 et 〈〈 Floyd a atterri sain et sauf àľaéroport Logan 〉〉) et sur quelle autre information peut ětre ajoutée. Le choix de la méthode de réalisation influe également sur la façon dont les caractères saillants des ééments qui sont exprimés seront perçus (par ex.: 〈〈 la voiture verte est dans le garage 〉〉 et 〈〈 la voiture dans le garage est verte 〉〉). L'auteur a défini un niveau intérmediaire de représentation pour la planification de textes qu'il a appelé structure de texte. Il; s'agit ?'un niveau linguistique abstrait qui refléte les contraintes linguistiques appropriées tout en s'éloignant du détail syntaxique. Cette représentation permet au planificateur de textes ?avoir un meilleur contrǒle des décisions, et done de tirer profit de la force ?expression du langage afin de tenir compte des subtiliés de sens. Plus important encore, la structure de texte permet au processus de génération ?ětre incrémentiel, car elle s'assure que le plan de texte en voie de composition soit toujours exprimable dans le langage.     

��Ȼ����Һ���÷����̽

求文针对我国天然气凝液如何利用问题,结合新技术进展,进行了初步探讨,认为原料较多的场合,应以催化脱氢或芳构化作为当前的主要加工方向。对原料较少的场合,也提出一些看法。     

Solving regularized least squares with qualitatively controlled adaptive cross‐approximated matrices

The adaptive cross‐approximation (ACA) technique is applied to accelerating an inverse‐problem solver that estimates charge distribution on a dielectric spacer. The ACA generates an approximated system‐matrix that enables us to carry out high‐speed inverse calculation. We designed an approximation procedure based on ACA with some additional concepts, that is, (a) partitioning of matrix based on algebraic information, (b) approximation quality control based on matrix norms, and so on. The tested solver (LSQR for regularized least squares) with ACA demonstrates about 10 times faster performance than that without ACA. © 2007 Wiley Periodicals, Inc. Electr Eng Jpn, 159(3): 10–18, 2007; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20326     

A comparative study of short nylon fiber—Natural rubber composites prepared from dry rubber and latex masterbatch

A novel method for the preparation of short nylon fiber–natural rubber composites was developed in which short fibers chopped to approximately 6 mm were incorporated in the latex stage and processed into sheet form. By this method, mixing cycle time was reduced without compromising the fiber dispersion. Fiber breakage during mixing was reduced. The new composites when compounded with a dry bonding system based on hexamethylenetetramine, resorcinol and hydrated silica (HRH) showed improved modulus, tensile strength and abrasion resistance compared to conventional composites. Tear strength, resilience, and compression set were similar to the conventional composites. SEM analysis indicated better interaction between matrix and fibers in the case of latex master batch. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Studies on jute–asphalt composites

The tensile properties of jute make it a suitable raw material for asphalt overlay (A/O) fabric. In this study, the thermal stability of jute under conditions of asphalt overlaying process was investigated and the compatibility of jute with asphalt was assessed through experimentation on jute–asphalt composites under mechanical and hygral loads. Fourier transform infra red (FTIR) spectroscopic study revealed probable chemical bonding between jute and asphalt. The test for ascertaining the capability of asphalt encasement for protecting jute against biodegradation under enzymatic attack was found positive. A 6‐month hygral treatment, of the jute–asphalt composite, showed significant increase in modulus of the material. The results indicate that although the strength of jute deteriorates by about 10% under asphalt overlaying condition, the overall tensile behavior of jute fabric–asphalt composite material is considerably superior to that of the pure jute fabric, even under biological and extended hygral loading conditions. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci 2008     

Failures of retrieval and comparison constrain change detection in natural scenes.

In a change detection paradigm, a target object in a natural scene either rotated in depth, was replaced by another object token, or remained the same. Change detection performance was reliably higher when a target postcue allowed participants to restrict retrieval and comparison processes to the target object (Experiment 1). Change detection performance remained excellent when the target object was not attended at change (Experiment 2) and when a concurrent verbal working memory load minimized the possibility of verbal encoding. (Experiment 3). Together, these data demonstrate that visual representations accumulate in memory from attended objects as the eyes and attention are oriented within a scene and that change blindness derives, at least in part, from retrieval and comparison failure. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

厦门市气源转换的技术分析

分析了气源转换时原有输配系统的管道、调压设备、计量设备、用气设备与天然气系统相适应的问题，提出了相应的措施。     

直接斜率波前复原算法的控制效果分析

建立自适应光学系统功率谱抑制函数的概念，分析了采用直接斜率波前复原算法的自适应当光学系统的控制效果，理论分析与６１单元自适应光学系统上的实验结果表明，直接斜率波前复原算法将导致控制效果下降。     

管线用高强韧性宽厚钢板的开发

本文回顾了舞钢高强韧性管线用宽厚钢板的研制开发过程，并结合生产工艺，对钢板性能作了全面分析，指导了钢管线钢的生产。舞钢X70级管线钢有较高的断裂韧性、良好的可焊性以及抗SSCC、HIC性能。舞钢正在进行技术改造，以进一步改善组织，提高性能、满足西气东输要求。