贵冶动力中心二期反渗透系统改造

本文阐述对贵冶动力车间二期反渗透进行改造的成功实践 ,主要从反渗透系统设计、反渗透系统中容易出现的问题及解决方法等进行介绍。     

Pultruded fibre reinforced polyurethane composites II. Effect of processing parameters on mechanical and thermal properties

This paper presents a novel process for the fabrication of pultruded polyurethane (PU) composites. The effects of the processing parameters on the mechanical properties (flexural strength and flexural modulus, etc.) and thermal properties (HDT) of the fibre reinforced PU composites by pultrusion have been studied. The processing parameters investigated include pulling rate (in-line speed), die temperature, filler type and content, and post-cure time and temperature. Results show that the composites possessed various optimum pulling rates at different die temperatures. On the basis of the DSC diagram, the swelling ratio, the mechanical properties and the thermal properties of composites, the optimum die temperature can be determined. It is found that the mechanical and thermal properties increase with filler content for various types of filler. The mechanical and thermal properties increase at a suitable post-cure temperature and time. Furthermore, the properties which decreased due to the degradation of composite materials for a long post-cure time will be discussed.     

InGaAs（P）分别限制应变单量子阱激光器的优化设计

针对较常用的ＩｎＧａＡｓ（Ｐ）分别限制应变单量子阱激光器，给出了为得到最大净增益的优化设计参数。对于激射波长为１．５５μｍ的无应变激光器，最佳的光限制层波长为１．２４μｍ，厚度为１００ｎｍ。当阱材料引入压缩应变后．由于价带的有效状态密度减小，量子阱激光器的微分增益变大，阱深的增大对增大线性增益的效果更加明显．所以最佳光限制层的波长将变短，为１．２０μｍ     

优选法在选择刀具角度中的运用

应用优选法确定刀具几何参数,优选得γ=20°,主偏角φ=81°,刃倾角λ=20°,使生产率提高3倍。     

PARAMETER ESTIMATION IN EXPONENTIAL MODELS

Abstract. In this paper the problems of parameter estimation and order determination of an exponential (EX) model are studied in the time domain. In order to estimate the parameters, the parameter equations of an EX model are given in terms of the autocorrelation function, which is similar to the Yule-Walker equations of an autoregressive moving-average model. Estimates of parameters are obtained with the aid of the parameter equations and theorems are proved relating the convergence rate and asymptotic distribution of the estimates. We present two kinds of methods for estimating the order and prove that the estimates of the order are consistent.     

Φ10007/00有压三产品重介旋流器结构参数优选与分选效果

辛置选煤厂针对原煤煤质变化后的特点 ,采用有压给料三产品重介旋流器为核心的高效选煤工艺系统分选 5 0～ 0mm原煤 ;对旋流器一段及二段中心管的直径和插入深度、二段底流口的直径等进行了优化调整 ,同时调整了介质泵的工作频率及悬浮液密度等参数 ,取得了分选效率高、产品质量稳定等显著效果     

气体控制参数对气体辅助成型产品翘曲的影响

从气体辅助注射成型工艺的角度探讨了气体的延迟时间和第一段压力这两个关键的参数对槽的影响进而对产品翘曲变形的影响，结果表明：虽然通过使用气体辅助注射成型技术能改善产品变形，但并不能完全消除变形；造成产品变形的原因和机理十分复杂，只有进行从设计到工艺的全方位考察才能有效的控制变形，气体手指效应也是造成产品变形的一个重要因素，工艺上可以通过调整延迟时间和气体压力来减小产品的变形量。     

印刷胶带生产中的几个问题

对印刷胶带生产中的几个问题如稀释剂、印刷中参数、涂布工艺等作了简述。     

ZAG100－1000／35型全自动压滤机的研制与应用

介绍了ＺＡＧ１００－１０００／３５型全自动压滤机的研制与应用情况．表明机组主机结构、生产能力、自控水平均比引进产品有所提高，整机性能良好。     

神华集团孙家沟选煤厂工艺流程及设备的评价

简述了孙家沟选煤厂工艺参数的选择和设计情况及投产后的运行效果,评价认为,该厂建设速度快,工艺流程合理,设备性能良好,产品质量合格、稳定。