基于支持向量机的代谢网络特征分析

把细胞内所有生化反应表示为一个网络指为代谢网络,是所有参与代谢过程的化合物之间以及所有催化酶之间的相互作用的反映,是抽象表达对细胞的代谢。在不同的物种中都含有大量的代谢翻译,却代谢网络是高度保守的。要了解包括代谢系统在内的许多自然、社会系统都起着重要的作用,所以要对于复杂网络进行研究并掌握它们的规律意义很大。利用代谢网络对微生物的耐热性进行分类研究对认识和利用细胞代谢过程有很大的帮助,从而促进发酵工程、制药工业等产业的发展。     

磁流变阻尼器内部流体动能的能量采集

为了构建自供能式磁流变阻尼器内部实时状态监测传感系统,本文介绍了一种针对磁流变阻尼器内部流体能的能量采集装置。该装置被安装于磁流变阻尼器活塞顶端并为检测阻尼器内部工作参数的无线传感模块1供电。根据能量守恒定律,推导出磁流变阻尼器中磁流变液流动能的理论模型。通过实验测试分析了在不同的外界激励下能量采集装置的工作情况,证明了采集的电能随着活塞的运动频率增加而增加,而与磁流变阻尼器的磁流变特性没有明显的关系。测试表明利用此装置能较好的采集到来自于磁流变阻尼器内部流体流动产生的能量,为无线传感模块供电。     

The pulse distributed file system

A network of powerful personal computers, linked by a high-speed local area network, is being seen increasingly as an alternative to a traditional centralized time-sharing operating system. The PULSE project is investigating how such a system may be constructed to give the benefits of a self-sufficient personal computer to each user without losing the facilities for communication and sharing of data inherent in centralized systems. In particular, a distributed file system has been built which provides a single global UNIX

1 UNIX is a trademark of Bell Laboratories.

-like hierarchy, with a consistent appearance when accessed from any machine. Replicated copies of files are maintained to improve reliability, increase performance, and enable each machine to run stand-alone, albeit with reduced facilities.     

Photothermal radiometric detection and imaging of surface cracks

This paper discusses surface crack detection by photothermal radiometric imaging (PRI). In PRI, also called dynamic infrared scanning, a surface is scanned with a spot of heat. Imperfections are detected by radiometrically sensing changes in the surface temperature of a small area in the vicinity of this spot. In the work described, cracks narrower than 25 µm (0.001 in.) in a lightly rusted steel surface have been detected. Indiscrete scanning an amplitude modulated heating beam is moved in steps, remaining at each location long enough to measure amplitude and phase of the AC temperature. Incontinuous scanning a constant intensity heating beam is moved continuously while the temperature deviations are measured. This paper presents methods of calculating amplitude and phase of surface temperature for discrete scanning and instantaneous temperature for continuous scanning across a surface crack. For a steel surface scanned by a watt-level laser beam, predicted surface temperature deviations when crossing the crack are several degrees Celsius, with expected radiometrically detected power several orders of magnitude above the detector noise. In experiments performed, both techniques easily detected narrow cracks in a smooth, clean surface. Discolorations and pits, on the other hand, generate a disturbing type of surface noise. This noise was minimized by differential detection. Based on results obtained, continuously scanned PRI with a fan-type heating beam and array detection could become a viable way of mapping surface cracks at practical scanning speeds.     

On mapping processes to processors in distributed systems

This paper is concerned with the implementation of parallel programs on networks of processors. In particular, we study the use of the network augmenting approach as an implementation tool. According to this approach, the capabilities of a given network of processors can be increased by adding some auxiliary links among the processors. We prove that the minimum set of edges needed to augment a line-like network so that it can accommodate a parallel program is determined by an optimal path cover of the graph representation of the program. Anoptimal path cover of a simple graphG is a set of vertex-disjoint paths that cover all the vertices ofG and has the maximum possible number of edges. We present a linear time optimal path covering algorithm for a class of sparse graphs. This algorithm is of special interest since the optimal path covering problem is NP-complete for general graphs. Our results suggest that a cover and augment scheme can be used for optimal implementation of parallel programs in line-like networks.A preliminary version of this paper was presented at the 6th IEEE Conference on Computer Communications (INFOCOM '87).This reseach is supported in part by National Semiconductor (Israel), Ltd.     

低温裂纹张开位移预测方法的讨论

把低温影响下的COD试验数据用灰色理论中的累加方法进行累加，可以使一组没有规律的数据成为一条光滑的曲线．然后利用人工神经网络和自适应模糊推理系统两种方法进行预测，算例的结果表明用一次累加后的数列预测精度较高。     

人工神经网络技术在电工产品可靠性实验中的应用(理论部分)

本文简要介绍了人工神经网络，BP神经网络的结构、训练和学习规则以及人工神经网络非线性时间序列预测的应用概况。     

基于ISP技术的交流伺服电机转子位置检测电路

介绍了基于ISP技术的交流伺服系统电机转子位置检测电路的设计和实现。该电路将所有的模块集成到一块高密度可编程器件中 ,提高了系统的稳定性 ;脉宽可调节的全数字四倍频电路和十二位可逆计数器保证了检测的精度 ;器件特性参数的一致性更有利于进行精确的轮廓控制     

汽车振动噪声测试的阶次跟踪方法

汽车振动和噪声是影响舒适性的主要因素，如何采用有效的技术手段测量分析汽车的振动、噪声，日益受到人们重视。本文应用PULSE多分析系统中的阶次跟踪分析方法，测试分析了车内司机座位处振动、噪声随发动机转速变化的关系，结果发现，对于试验车在测试工况下1．5倍发动机转速时，车内振动和噪声都有一个峰值。文中通过阶次分析，对发动机运转稳定性进行了测试。为降低车内噪声和振动响应提供了分析依据和参考。     

应用人工神经网络理论建立热粘塑性材料的本构关系

本文将人工神经网络（ＡＮＮ）用于建立热粘塑性材料的本构关系，意在探索出一种描述材料变形力学行为的新方法。文中给出了应用人工神经网络建立热粘塑性材料本构关系的ＢＰ模型和学习算法过程，并应用于４５号钢在高温和高速变形条件下的流动应力计算。计算结果与实测结果比较表明，二者吻合良好。因此，应用人工神经网络建立热粘塑性材料的本构关系具有重要的工程应用价值。