SC-1型乙烯裂解炉先进控制系统开发与应用

针对SC-1型乙烯气液相裂解炉控制问题,提出了一种鲁棒性较强的先进控制策略,开发了由“DCS控制层”和“上位机控制层”构成的先进控制系统.该系统有效地解决了燃料热值波动对裂解炉裂解气出口温度的影响,减少了裂解气出口温度和裂解炉总加工量的波动,实现了“卡边”控制及生产过程的安全逻辑保护,优化控制器可一键投运和切除,解决了裂解炉控制问题的复杂性.该系统成功应用于兰州石化46万吨／年乙烯装置,大幅度提高了装置的平稳率,提升了双烯收率,降低了装置能耗.     

LTE小区搜索中一种新的SSS检测算法

主要研究了SSS检测, 提出一种新的SSS检测算法。该算法首先利用滑动平均窗修正接收的PSS处估计出的信道频率响应, 并用修正后的信道频率响应对接收的SSS序列进行信道补偿; 其次, 算法对信道补偿后的序列进行实数提取操作, 消除虚部数据干扰; 最后算法联合两个连续的SSS接收序列进行检测进一步提高检测性能。TDD和FFD两种模式下的仿真结果表明：该算法可以较好地实现SSS检测且比现有几种SSS检测算法在低信噪比（SNR<0 dB）条件下具有更好的检测性能。     

Asynchronous fault detection filter design approach for discrete‐time switched linear systems

This paper is concerned with the problem of the fault detection filter design for discrete‐time switched linear systems with average dwell‐time. The designed fault detection filters are also switched systems, which are assumed to be asynchronously switched with the original switched systems. Improved results on the weighted l₂ performance and the H _? performance are first given, and the multiple Lyaounov‐like functions during matched period and unmatched period for the running time of one subsystem are used. By the aid of multiple Lyapunov‐like functions combined with Projection Lemma, the FD filters are designed such that the augmented systems under asynchronous switching are exponentially stable, and the residual signal generated by the filters achieves the weighted l₂‐gain for disturbances and guarantees the H _? performance for faults. Sufficient conditions are formulated by linear matrix inequalities, and the filter gains are characterized in terms of the solution of a convex optimization problem. Finally, examples are provided to demonstrate the effectiveness of the proposed design method. Copyright © 2012 John Wiley & Sons, Ltd.     

Decentralized weighted control for a class of large‐scale systems with multi‐modes

In this paper, the control synthesis problem for a class of large‐scale systems with multi‐modes that are called large‐scale switched systems is addressed. By introducing the concept of decentralized switching signal and the relevant decentralized average dwell time, the asymptotic stability and weighted ?₂ gain performance are investigated. It should be noted that the decentralized switching covers general switching cases for large‐scale switched systems, namely, it admits both time‐dependent switching signal and arbitrary switching signal blended in the decentralized switching. Then, on the basis of the analysis results, the decentralized weighted control scheme including state feedback controller gains and switching signals is studied. Several design algorithms are proposed to meet different controller design problems. Finally, numerical examples are provided to illustrate theoretical findings within this paper. Copyright © 2013 John Wiley & Sons, Ltd.     

涂层转移法精密铸造技术在子午线轮胎模具制造中的应用

子午线轮胎模具计算机辅助快速制造系统是由ＣＡＤ技术、快速成型技术、涂层转移法精密铸造技术、材料技术等多项高新技术组合而成的一项独特的先进制造技术。该系统充分利用液态材料成型任意性和高再现性的特点，具有适应性强、重复性好、加工周期短、制造成本低的特点。     

球窝型动态混合器结构和机理的研究

介绍研制的题示混合器结构及其混合机理。在分析球窝流场各节点速度分布的基础上,用加权平均总应变和分流混合度作为评定指标,对球窝型混合器的混合行为进行分析。通过对比实验证明球窝型混合器对于高粘流体具有良好的混合功效。     

Crack elongation and its width of large depth reinforced concrete beams

In order to meet the requirement of structural inspection,the crack spacing and crack width at various heights in the tensile zone of six large depth reinforced concrete beams were measured under several loading levels of serviceability state.The effects of the depth of normal section beams on the crack spacing and crack width were analyzed,and the modified model is proposed for calculating the average crack spacing by thinking about the depth of normal section,the reinforcement arrangement and the effective reinforcement ratio.The relationships of crack widths at any position in the tensile zone and at the reinforcement level on the side surface of beam were studied.By theoretical and statistical analysis,a method is proposed to calculate the ratios of crack widths between any position and the reinforcement level on the side surface of large depth reinforced concrete beams.     

曲轴偏置机构原理在钢板滚切剪机设计中的应用

以空间七连杆滚切剪机运动轨迹方程为基础,采用某公司2800mm的曲轴偏置新型结构的单轴双偏心定尺滚切剪为研究对象。对曲轴偏置前后及不同偏置量的钢板剪切力、连杆力、保持剪刃间隙恒定的后滑道推力进行了分析对比。发现采用曲轴偏置后,在前曲柄提刀时刻机构仍然能够保持足够大的后滑道推力,机构在采用60mm-100mm的偏移量时后滑道压力同侧向力最接近平衡。理论分析结果及现场钢板剪切质量表明曲轴偏置机构在保持剪架在剪切过程中平稳,保证剪刃间隙恒定发挥了重要作用。     

基于Hough变换的SAR图像舰船尾迹检测方法

该文提出了一种基于Hough变换与K均值聚类检测舰船尾迹的算法。该方法通过归一化Hough变换求出原图像尾迹所在直线的平均能量值,由于原图中的尾迹往往并不规则,导致能量最大值并不是整条直线的最佳统计代表值,其周围会有一些能量次大的点出现,且形成一个由若干能量点组成的点集。该文引进了K均值聚类方法,将这些点集归类,归类后的每一类的类心能很好的代表一条尾迹,实验结果表明方法是有效的。