大型复杂跨流域调水工程电站-水库-泵站群多目标优化调度

考虑调水量、发电最大和耗能最小3个目标,建立电站-水库-泵站群多目标优化调度模型。基于参数调整策略、邻域变异和加速策略,提出了求解多目标优化调度模型的综合改进布谷鸟新算法并求解模型,获得了发电、调水、泵站耗能多目标Pareto解集。以引汉济渭大型复杂跨流域调水工程为实例,将该模型与模拟调度模型和NSGA-Ⅱ算法多目标优化调度模型的结果进行比较,结果表明,该优化调度模型的发电、调水、耗能、弃水等各项指标合理,具有相对优势。     

Temporal and spatial dynamics of surface run‐off from Lake Basaka catchment (Ethiopia) using SCS‐CN model coupled with remote sensing and GIS

The Lake Basaka catchment (Ethiopia) has undergone a significant land use–land cover (LULC) change and lake level rise over the past five decades. Significant quantities of water and sediment flow annually into the lake through erosion processes. An appropriate method of estimating the surface run‐off from such ungauged and dynamic catchment is extremely important for delineating sensitive areas (based on run‐off responses) to be protected and for development of suitable measures to reduce run‐off and associated soil loss. Reliable prediction of run‐off, however, is very difficult and time‐consuming for catchments such as that of Lake Basaka. The present study estimated the dynamics of surface (direct) run‐off using the NRCS‐CN model in ArcGIS, assisted by remote sensing and ancillary data. The results indicated the Lake Basaka catchment experienced significant temporal and spatial variability in its run‐off responses, depending on the rainfall (amount and distribution) pattern and LULC changes. A significant run‐off increase occurred after 1973, consistent with significant LULC changes and lake level increments occurring after that period. A reduced vegetation cover also resulted in increased run‐off coefficient of the lake catchment from 0.11 in the 1970s to 0.23 in the 2000s, indicating the important need to consider possible future LULC evolution when forecasting the lake catchment run‐off behaviour.     

ANALYSIS OF DISSIPATIVE STRUCTURE IN MATERIAL COMMINUTION

ＡＮＡＬＹＳＩＳＯＦＤＩＳＳＩＰＡＴＩＶＥＳＴＲＵＣＴＵＲＥＩＮＭＡＴＥＲＩＡＬ　ＣＯＭＭＩＮＵＴＩＯＮＺｈａｎｇ；Ｚｈｉｔｉｅ（ＤｅｐａｒｔｍｅｎｔｏｆＭｅｃｈａｎｉｃａｌＥｎｇｉｎｅｅｒｉｎｇ，ＣｅｎｔｒａｌＳｏｕｔｈＵｎｉｖｅｒｓｉｔｙｏｆＴｅ...     

双曲线模型在某残积土地基沉降计算中的应用

对于残积土地基的沉降变形,实践证明采用压缩模量的计算结果往往偏大,应采用现场试验得到的变形模量来进行计算。为此,该文以广州某残积土地基的实测资料为例,对其非线性沉降采用双曲线模型来表示,所需计算参数则根据现场载荷试验来确定,最后将计算结果与试验结果进行对比。结果初步表明,双曲线模型法用于残积土地基的沉降计算是可行的。     

软黏土不排水循环应力应变关系的数值模拟

对程星磊等提出的总应力形式增量弹塑性本构模型进行二次开发,以模拟复杂应力状态下软黏土的响应。通过Newton-Raphson算法,对材料非线性问题进行迭代求解;针对本构模型中应力反向等一系列关键性问题,应用欧拉切线算法编写了有限元程序,并结合子增量方法提高了计算精度。预测了软黏土在轴对称应力状态下的响应,得到了应力应变关系曲线,将其与单元预测结果进行比较,二者趋于一致,从而验证了有限元程序编写的合理性。利用该程序模拟三轴不固结不排水试验,模拟结果与试验吻合良好,表明该本构模型有限元程序可以反映轴对称应力状态下软黏土的不排水应力应变特性,可应用于更加复杂边值问题的模拟计算。     

Global robust output tracking control for a class of cascade nonlinear systems with unknown control directions

We investigate the global robust tracking problem via output feedback for a class of cascade nonlinear systems with dynamic uncertainties and non-vanishing disturbances. It does not require a priori knowledge of the sign of the high-frequency gain. A recursive design scheme is presented using the ideas of pseudosign function, Nussbaum-type gain technique and the deadzone method. It is shown that under some conditions, the tracking error can be guaranteed asymptotic to the interval [?ε, ε]?? with arbitrary prescribed ε>0 after a finite time, while keeping all signals of the resulting closed-loop systems bounded. The simulation results demonstrate the effectiveness of the proposed algorithm.     

A new high accuracy method for two-dimensional biharmonic equation with nonlinear third derivative terms: application to Navier–Stokes equations of motion

In this paper, we propose a new compact fourth-order accurate method for solving the two-dimensional fourth-order elliptic boundary value problem with third-order nonlinear derivative terms. We use only 9-point single computational cell in the scheme. The proposed method is then employed to solve Navier–Stokes equations of motion in terms of streamfunction–velocity formulation, and the lid-driven square cavity problem. We describe the derivation of the method in details and also discuss how our streamfunction–velocity formulation is able to handle boundary conditions in terms of normal derivatives. Numerical results show that the proposed method enables us to obtain oscillation-free high accuracy solution.     

Statics Aware Grid Shells

We introduce a framework for the generation of polygonal gridshell architectural structures, whose topology is designed in order to excel in static performances. We start from the analysis of stress on the input surface and we use the resulting tensor field to induce an anisotropic nonEuclidean metric over it. This metric is derived by studying the relation between the stress tensor over a continuous shell and the optimal shape of polygons in a corresponding gridshell. Polygonal meshes with uniform density and isotropic cells under this metric exhibit variable density and anisotropy in Euclidean space, thus achieving a better distribution of the strain energy over their elements. Meshes are further optimized taking into account symmetry and regularity of cells to improve aesthetics. We experiment with quad meshes and hexdominant meshes, demonstrating that our gridshells achieve better static performances than stateoftheart gridshells.     

离散Walsh变换在超声治疗无损测温中的应用

利用高强度聚焦超声对新鲜的离体猪肉进行辐射,并通过B超获取辐射前后的超声图像。采用二维离散Walsh变换法,从辐射前后的超声图像的差图像中分离出低频分量,作为反映温度信息的参数。选取确定系数作为衡量误差的参数,通过曲线拟合,发现二维离散Walsh变换直流分量与温度呈近似线性关系,且多组数据的斜率非常接近,与传统的灰度均值测温法相比,实验结果表明,该方法误差更小,温度分辨率更高,使用正交矩阵变换,符合计算机语言的逻辑,仿真检测时间较短,在实际应用中能为超声无损测温提供准确可靠的依据。