单桩腿有限元分析

为保证桩腿在冬季冰区海域的安全使用,对桩腿结构进行冰载荷作用下的强度分析。应用ANSYS软件建立桩腿、地基、冰相互作用的仿真计算模型,实现桩腿的力学分析。对桩腿进行了强度校核,计算出冰载荷作用下桩腿的变形及其应力状态。计算结果表明,桩腿在此冰载荷作用下强度满足安全要求。     

潜孔锤冲击作用下土体变形的有限元分析

潜孔锤冲击挤密钻进过程中周围土体的变形机理是一个高度非线性问题。针对潜孔锤在土中的面-面接触问题,运用Drucker-Prager屈服准则为判据,将土体视为DP材料,通过钻具与土之间的接触及施加冲击载荷来模拟钻进过程,从而建立了潜孔锤在土中冲击挤密钻进的有限元模型。利用非线性瞬态动力学有限元分析手段,对钻进过程中冲击力对土的作用加以研究,分析了钻具周围土体的应力、应变以及钻具与土体的摩擦情况。结果表明,在冲击载荷作用下,锥形钻头前端土体应力集中,并形成应力泡,冲击功主要用于竖向压缩土体,而水平方向的挤压作用相对较小,摩擦应力在钻头锥面附近出现峰值,是影响钻进速度的主要原因之一。     

Compact Dipole Antenna for Terrestrial Digital Multimedia Broadcasting Service

A compact dipole antenna for the terrestrial digital multimedia broadcasting (TDMB) application is presented. The length of the antenna is about 0.06λ at the TDMB resonance frequency of 190 MHz. Miniaturization of the antenna is achieved by using meander structures and lumped elements. The proposed antenna has two resonance frequencies and covers the TDMB band from 174 MHz to 216 MHz in Korea. The antenna has good impedance bandwidth and radiation characteristics for the TDMB. The experimental results of the designed dipole antenna are presented and analyzed.     

The principles of information processing based on the numerical solution of the nonlinear heat-conduction problem. Pt. 1. The three-dimensional discrete mathematical model

A three-dimensional solution of the direct problem of heat conduction when a linear pulsed heat source acts in the plane of contact of two semibounded bodies is presented. The solution is obtained by the method of finite differences. An example of the modeling is considered. __________ Translated from Izmeritel’naya Tekhnika, No. 10, pp. 42–45, October, 2007.     

三维有限元法分析频率对接地电阻的影响

提出了用涡流场的A-V有限元分析方法计算接地系统接地电阻的方法,分析了入地电流频率的变化对接地电阻的影响。计算结果表明,频率对接地体自身电阻的影响较大,但对散流电阻的影响很小。     

Determining stress intensity factors of composites using crack opening displacement

The main purpose of this paper is to find the mixed-mode stress intensity factors of composite materials using the crack opening displacement (COD). First, a series solution of the composite material with a crack was used to evaluate COD values. Then, the least-squares method was used to calculate mixed-mode stress intensity factors. This algorithm can be applied to any method that generates or measures COD values. The major advantage of this method is that COD values very near the crack tip are not necessary. Both finite element simulations and laboratory experiments were applied to validate this least-squares method with acceptable accuracy if the even terms of the series solution are removed.     

Symmetric BEM formulations for 2-D steady-state and transit potential problems

This paper presents a new concept for symmetric boundary element method (SBEM) applicable to 2-D steady-state and transit potential problems. Two kinds of SBEM formulations are derived. Symmetry is obtained simply through matrix manipulation, and no hypersingularity appears. Therefore, SBEM is much easier than the traditional symmetric Galerkin BEM. Compared with the traditional asymmetric BEM, the present SBEM can reduce the computational cost for time domain problems only. However, when applied to BEM/FEM coupling procedure, SBEM can reduce the computational cost for both steady-state and time domain problems. Three numerical examples are included to illustrate the effectiveness and accuracy of the present formulations.     

WSP特殊螺纹接头油井管的研制

介绍了WSP特殊螺纹接头的基本结构和设计思想,运用有限元方法,重点论述了密封设计和连接强度设计的方法和准则,并通过全尺寸试验进行了验证。计算和试验结果表明,该接头具有先进的螺纹形式、合理的扭矩台肩和金属/金属密封结构,有效地克服了API圆螺纹和偏梯形螺纹的不足,螺纹达到了与管体等强度,气密封能力达到了管体的内壁屈服压力。研究结果可以为开发更多适合油气田实际的特殊螺纹接头油井管提供参考。     

Mixed formulation of nonlinear beam on foundation elements

This paper presents an inelastic element for the analysis of beams on foundations. The element is derived from a two-field mixed formulation with independent approximation of forces and displacements. The state determination algorithm for the implementation of the element in a general purpose nonlinear finite element analysis program is presented and its stability characteristics are discussed. Numerical studies are performed to compare the model with the classical displacement formulation. The studies confirm the superiority of the proposed model in describing the inelastic behavior of beams on foundations.     

热带钢连轧机工作辊温度场和热凸度预报模型

采用一种具有较高精度的样条有限条法对轧制过程中工作辊的温度场和热凸度进行计算和预报。结果证明，该模型理论计算值与现场实测值吻合较好，可以较准确地计算和预报热带钢连轧机工作辊的热凸度。