Influence of the intrinsic layer characteristics on a-Si:H p–i–n solar cell performance analysed by means of a computer simulation

In this paper a set of one-dimensional simulations of a-Si:H p–i–n junctions under different illumination conditions and with different intrinsic layer are presented. The simulation program ASCA permits the analysis of the internal electrical behaviour of the cell allowing a comparison among the different internal configurations determined by a change in the input set. Results about the internal electric configuration will be presented and discussed outlining their influence on the current tension characteristic curve. Considerations about the drift–diffusion and the generation–recombination balance distributions, outlined by the simulation, can be used to explain the correlation between the basic device output, the i-layer characteristics (thickness and DOS), the incident radiation intensity and photon energy.     

抽水蓄能电站运行方式和电网经济效益分析

用计算机模拟法建立模拟模型，对选定的系统进行生产模拟，统计计算出电网系统投入不同抽水蓄能容量时所发生的系统运行总燃料费用（包括抽水蓄能电站的抽水费）和系统的负荷缺电力时间概率（LOLP）等指标。通过对计算结果的分析，得出不同系统在投入不同容量抽水蓄能机组和采取不同运行方式的情况下，其运行总燃料费用的边际成本和LOLP的边际值的变化规律，并且对电网的经济效益进行合理分析。从而为抽水蓄能电站的规划和投资建设提供理论依据，推动抽水蓄能电站的发展，促使我国电源结构趋向合理。     

金刚石膜的计算机虚拟制备技术中的分子动力学模拟

综述了近年来金刚石薄膜形成过程的分子动力学（Molecular Dynamics，简称MD）模拟研究，详细地阐述了原子间相互作用势的选取，总结了不同沉积条件下MD的计算模型和几种典型情况下的模拟结果。研究表明：在原子尺度上，MD方法能较全面地提供有关膜生长的信息，对进一步了解金刚石膜形成的微观机制以及为细观层次仿真提供基本信息均具有重要意义。     

流量自动控制的设计与实现

文章通过分析多相流模拟井的实际工作要求 ,提出了简单实用的流量自动控制模型。应用成型的计算机数据采集和控制模块及稳定可靠的流量控制部件 ,实现了各相流量的自动控制过程。该流量自动控制系统调节精度高、速度快、整体造价低 ,在实际应用中取得了良好的效果。     

地面防空作战的多导弹-单目标信息对抗模型与仿真研究

在地面防空作战中，地空导弹和空中目标的对抗是一个动态的对抗过程。通过把模型分为自身状态和对敌方的估计状态，建立了防空作战多导弹－单目标的对抗模型，分析了不同阵地的导弹追击和目标逃避时的控制输入选择原则。通过仿真，得到了较好的结论，体现了导弹和目标之间的对抗性，对深入研究地面防空系统对抗性建模方法具有一定意义。     

机动武器系统的含间隙动力学研究--下篇:系统仿真

本文把中篇建立的间隙铰模型引入多体系统动力学分析中,得到了一种处理含间隙多体系统动力学问题的一般方法.应用这种方法对机动武器的发射过程进行了原理性的仿真,验证了前面建立的碰撞模型和间隙模型,并分析了间隙对导弹运动状态的影响.导弹发射过程具有变拓扑的特点,本文方法提供了一种处理这类问题的思路.     

Numerical simulation of typical contact situations of brake friction materials

In the paper, a model typical for contact situations of automotive brakes is established based on the method of movable cellular automata. The processes taking place at local contacts in an automotive brake system are analysed. Based on microscopic and micro-analytical observations, the following contact situations were simulated: (i) a couple of ferritic steel against pearlitic steel, both covered by an oxide layer mixed with graphite nanoparticles and (ii) the same situation but without oxide layers. The results of calculated mean coefficients of friction of the oxide-on-oxide contact correspond well to expected values for a real braking system, whereas steel-on-steel contact are twice as high. This allows one to make some conclusions; for example, oxide formation will take place more quickly than friction layer elimination, and finally this is responsible for the stabilisation of the coefficient of friction.     

Simulation of Strength Distribution in Ground Ceramics by Incorporating Residual Stress Effect

Strength of ground ceramics may be affected by residual stress as well as surface flaws induced by grinding. Strength prediction for ground ceramics is convenient for mechanical design of ceramic components. In this article, a numerical procedure based on fracture mechanics was proposed to estimate strength distribution of ground ceramics by considering grinding-induced residual stress. Bending strength and residual stress of ground ceramics were measured for three grinding-conditions. By comparison of simulated results with experimental ones, it was revealed that strength characteristics in experiments were well simulated by using the proposed procedure.     

一种以太网兼容的综合话音/数据传输协议

本文提出一种与现有以太网兼容的综合话音/数据协议.描述了协议模型及实现方法.并用PASCAL语言在IBM-PC机上模拟研究了该协议的性能.模拟结果表明,该协议能满足话音的实时要求,性能良好,且数据传输性能没有明显下降.协议克服了以太网传输话音延迟不确定的缺点.