Diffusion in metallic glasses

Rutherfordα-particles backscattering technique was employed for measurements of diffusion rates in metallic glasses. Effects of relaxation, crystallization and plastic deformation on diffusion rates were also investigated. It has been observed that the diffusion rates of a metallic solute are of the same orders of magnitude in both metal-metal and metal-metalloid glasses. A higher diffusivity is likely if there is a large difference between melting points of the solute and matrix. Relaxation has no effect on diffusion, however, diffusivity increases on crystallization. An increase in diffusivity is also observed on plastic deformation of metallic glass.     

硅外延片中的杂质控制

有5类掺杂源影响硅的外延片中的杂质分布。主掺杂质控制外延层的杂质浓度，决定外延层的电阻率。固态外扩散、气相自掺杂和系统自掺杂影响衬底界面附近的外延层杂质浓度的深度分布。该文介绍了此3类掺杂源的掺杂过程和抑制方法。金属杂质在外延层中对器件有害，防止沾污和使用吸杂技术能降低金属杂质在外延层中的浓度。     

由三面投影图生成三维立体图的方法研究

针对创新设计中零部件的三维虚拟造型问题，提出了一种由二维投影图生成三维立体图的计算机化辨识方法。通过辨识简单三维立体的形状和空间位置，克服了二维图形中面的积聚性和零件之间不规则相贯和截交曲线的识别问题，进而实现了复杂组合形体的计算机化设计与造型。最后，以箱体类零件为例，在AutoCAD环境下利用VC 和ObiectARX开发工具编程验证了该方法的有效性。     

NUMERICAL SIMULATIONS OF 2D PERIODIC UNSTEADY CAVITATING FLOWS

1. INTRODUCTION Cavitation is a natural phenomenon especially existing in liquids. A cavitating flow generally involves a large number of vapor structures such as bubbles or vortices which are convecting downstream. When they reach high pressure zones, th…     

HYDRAULIC CHARACTERISTICS OF WATER-WINGS FOR THE MIDDLE-PIER OF A DISCHARGE TUNNEL

1. INTRODUCTION In the design of a discharge tunnel with high water head and large flow, it is important to study the cavitation and the energy dissipation, such as the prevention of cavitation for slots of various gates [1-4], the effects of entrained ai…     

Material constant sensitivity boundary integral equation for anisotropic solids

In this paper, the material constant sensitivity boundary integral equation is presented, and its numerical solution proposed, based on boundary element techniques. The formulation deals with plane problems with general rectilinear anisotropy. Expressions for the computation of sensitivities for displacements, tractions, strains and stresses are derived, both for boundary and interior points. The sensitivities can be computed with respect to the bulk material properties or to the properties of part of the domain (inclusions, coatings, etc.). To assess the accuracy of the proposed approach, the computed results are compared to analytical ones derived from exact solutions obtained by complex potential theory, when possible, or finite difference derivatives otherwise. Copyright © 2005 John Wiley & Sons, Ltd.     

Diffusion Behaviour of Fe-Cu Interface of Copper Brazed Double-wall Steel Tubes

By means of electron probe(EPMA),scanning electron microscope(SEM),and optical microscope(QM),the diffusion behaviour on the Fe-Cu interface of copper brazed double-wall steel tubes andthe microstructure of the diffusion layer have been investigated.There are three kinds of metallurgicalbonds between copper plating layer and steel substrate: (1)the Cu diffusing into steel substratealong grain boundary of ferrite;(2)the Cu diffusion into grain bulk of ferrite: (3)the Fe diffusing intoCu layer.The copper brazed double-wall steel tubes are formed by the combination of the diffusionsmentioned above and this is the reason for excellent mechanical and technological properties of thecopper brazed double-wall steel tubes.     

Scale‐up and Spouting of Two‐Dimensional Beds

The objective of this paper is to present an analysis on the scale‐up procedure of two‐dimensional spouted beds. The task was carried out with three different beds measuring 0.15, 0.30 and 0.80 in width. The conditions of scale‐up were studied through geometrical similitude analysis. Some parameters of scale were adimensionalised, tested and validated in order to propose relationships capable of predicting values of dependent properties. Those relationships should be followed in a prototype of an equipment of industrial scale. The study permitted the development of correlations to predict values of maximum pressure drop, minimum spout velocity and maximum height of spouting.     

PAN聚合物一次性溶解新技术

阐述了一个全新的聚丙烯腈高聚物溶解理论，取代了以往人们思维中的高聚物大分子必须经过先溶胀再溶解的漫长的静态溶解过程。对于年产50kt/a腈纶装置可减少一次性投资约1500万元，减少运转费用360万元／a，在现有腈纶大装置上实施，经济效益十分可观。     

太阳电池板结构应力-应变状态分析

多层胶接是太阳电池板的结构特点,由于不同材料的弹性模量、热膨胀系数和泊松比不同,在温度场 作用下会产生热应力应变,在多次热交变过程中热应力．应变累积最后导致结构层间剥离,因此研究温度场作用 下太阳电池板结构应力应变状态具有非常重要的实际意义。本文推导了模拟太阳电池板结构应力-应变状态的一 维模型,该模型同样适用于分析多层胶接结构应力应变状态。