Effect of carbon surface oxidation on platinum supported carbon particles on the performance of gas diffusion electrodes for the oxygen reduction reaction

The effect of carbon surface oxidation on platinum supported carbon particles (Pt/C) with nitric acid was investigated by cyclic voltammetry, electrochemical impedance spectroscopy, polarization experiments and chronoamperometry. Cyclic voltammograms, polarization curves and electrochemical impedance spectra showed that the treated catalyst had much larger active surface area and higher ionic conductivity than the untreated catalyst, and provided enhanced performance for oxygen reduction. The formation of acidic groups was examined by IR spectra. The Pt/C surface oxidation had a large effect on the performance of a gas diffusion electrode for oxygen reduction reaction.     

Swelling properties of chemically modified oil palm empty fruit bunch based polyurethane composites

In this study, the diffusion of various types of solvent in oil palm empty fruit bunch/polyurethane composites, produced from chemically modified empty fruit bunches, was investigated. The solubility parameters and polymer–solvent interaction parameters of the produced composites were determined. The void contents of the composites were also determined before swelling tests to eliminate the free solvent present in the system. From the results obtained, we found that the diffusion of the solvents was dependent on the compatible group available and the voids present in the system. The solubility parameters of the empty fruit bunch/polyurethane composites with different degrees of chemical modification were 11.6 and 11.7 (cal/cm^?3)^1/2. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Development of a predictive model for polymer/solvent diffusion coefficient calculations

A new calculation procedure for free‐volume parameters is considered in this work by using viscosity prediction methods and the Levenberg‐Marquardt calculation scheme. All parameters used in the Vrentas–Duda free‐volume theory can be estimated from pure component properties. The prediction results are compared with experimental data for some polymer/solvent systems. The diffusion coefficient calculated by Vrentas–Duda theory can be used in the modeling of membrane separation processes. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Synthesis of polyurethane resins and its improvement on dimensional stability and finishing performances of medium‐ and small‐diameter softwoods

This study analyzed the effects of polyurethane (PU) resin treatments on surface homogeneity, dimensional stability, and finishing performances of medium‐ and small‐diameter softwoods produced in Taiwan. Two‐pack PU resins were prepared by combing short castor oil‐modified alkyd resin serving as a polyol with polymeric 4,4′‐diphenymethane diisocyanate (PMDI) serving as a hardener, by the molar ratio of NCO/OH+COOH of 1.2. Four types of short oil‐modified alkyd resins with different polyhydric alcohols (glycerin and pentaerythritol) and polybasic acids (phthalic anhydride and isophthalic acid) were synthesized. Three kinds of medium‐ and small‐diameter softwoods, including China fir, Taiwanina, and Japanese fir with a diameter of 10–15 cm were obtained from Hui‐Sun Forest Station, Taiwan. The wood coating of nitrocellulose (NC) lacquer including sanding sealer and top clear was used. Results show that the surface hardness, homogeneity, moisture excluding efficiency, and antiswelling efficiency of woods were enhanced by PU resin treatments. Among all the PU resins, the isophthalic acid and pentaerythritol‐containing PU resin (IPA‐P‐MDI) achieved the best improved efficiency on dimensional stability of woods. Results of two types of finishing procedure, i.e. NC lacquer sanding sealer plus top clear and top clear only, applied onto the PU‐treated woods revealed that the hardness, adhesion, and durability of NC lacquer films on the PU‐treated wood were superior to those of untreated one, especially for top clear finishing alone. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Water absorption properties of phosphate glass fiber‐reinforced poly‐ϵ‐caprolactone composites for craniofacial bone repair

The moisture uptake of polymers and composites has increasing significance where these materials are specified for invasive, long‐term medical applications. Here we analyze mass gain and the ensuing degradation mechanisms in phosphate glass fiber reinforced poly‐?‐caprolactone laminates. Specimens were manufactured using in situ polymerization of ?‐caprolactone around a bed of phosphate glass fibers. The latter were sized with 3‐aminopropyltriethoxysilane to control the rate of modulus degradation. Fiber content was the main variable in the study, and it was found that the moisture diffusion coefficient increased significantly with increasing fiber volume fraction. Diffusion, plasticization, and leaching of constituents appear to be the dominant aspects of the process over these short‐term tests. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2008     

USL和USK系列振动筛防噪技术分析

为了改善筛分机械的使用环境，降低筛分机械的噪声，从噪声源入手，从内因和外因两个方面分析了筛分机噪声的形成原因。论述了USL和USK系列振动筛在降低噪声方面所采取的先进技术措施。     

高等级公路边坡防护设计

分析了影响边坡稳定的因素 ,对不同环境条件下采用的不同路基边坡防护类型进行了介绍 ,重点阐述了经济有效的三维固土网垫结合植被护坡的类型 ,指出边坡稳定是保障公路畅通的重要基础     

石油套管的壁厚公差对承载能力的影响

石油套管的强度计算是按API标准进行的，它未能反映高强度套管和尺寸公差对抗压溃能力的影响。利用弹塑性力学理论建立理想的石油套管的抗压溃能力计算公式，并考虑套管的壁厚公差对计算公式进行修正。用该方法对受均匀载荷及非均匀载荷作用的套管进行分析，并同有限元计算结果相比，两者十分吻合，说明该方法的有效性。     

Multiplicative Operator Splittings in Nonlinear Diffusion: From Spatial Splitting to Multiple Timesteps

Operator splitting is a powerful concept used in many diversed fields of applied mathematics for the design of effective numerical schemes. Following the success of the additive operator splitting (AOS) in performing an efficient nonlinear diffusion filtering on digital images, we analyze the possibility of using multiplicative operator splittings to process images from different perspectives.We start by examining the potential of using fractional step methods to design a multiplicative operator splitting as an alternative to AOS schemes. By means of a Strang splitting, we attempt to use numerical schemes that are known to be more accurate in linear diffusion processes and apply them on images. Initially we implement the Crank-Nicolson and DuFort-Frankel schemes to diffuse noisy signals in one dimension and devise a simple extrapolation that enables the Crank-Nicolson to be used with high accuracy on these signals. We then combine the Crank-Nicolson in 1D with various multiplicative operator splittings to process images. Based on these ideas we obtain some interesting results. However, from the practical standpoint, due to the computational expenses associated with these schemes and the questionable benefits in applying them to perform nonlinear diffusion filtering when using long timesteps, we conclude that AOS schemes are simple and efficient compared to these alternatives.We then examine the potential utility of using multiple timestep methods combined with AOS schemes, as means to expedite the diffusion process. These methods were developed for molecular dynamics applications and are used efficiently in biomolecular simulations. The idea is to split the forces exerted on atoms into different classes according to their behavior in time, and assign longer timesteps to nonlocal, slowly-varying forces such as the Coulomb and van der Waals interactions, whereas the local forces like bond and angle are treated with smaller timesteps. Multiple timestep integrators can be derived from the Trotter factorization, a decomposition that bears a strong resemblance to a Strang splitting. Both formulations decompose the time propagator into trilateral products to construct multiplicative operator splittings which are second order in time, with the possibility of extending the factorization to higher order expansions. While a Strang splitting is a decomposition across spatial dimensions, where each dimension is subsequently treated with a fractional step, the multiple timestep method is a decomposition across scales. Thus, multiple timestep methods are a realization of the multiplicative operator splitting idea. For certain nonlinear diffusion coefficients with favorable properties, we show that a simple multiple timestep method can improve the diffusion process.     

一种微粉碎新设备——离心碎磨一体机

介绍一种离心碎磨一体机的工作原理、构造和特点 ,分析了碎磨机理及应用前景