Trapping Brownian ensemble optimally using Broadcast Stochastic Receding Horizon Control

Collision of suspended entities with surrounding molecules in a fluid environment leads to random movements of these entities, known as Brownian motion. Suppression of this motion in a Brownian ensemble has recently become essential for facilitating emerging applications in biology and in micro and nano scale self-assembled systems. How optimally this suppression can be performed remains an open question of great interest to both the natural science and the control engineering communities. In this paper, we address this question theoretically by introducing a novel “Broadcast Stochastic Receding Horizon Control” strategy for trapping an ensemble of non-interacting Brownian particles. The strategy designs a control input, independent of the number of particles, using measurements from a single particle as the only available feedback information and broadcasts it to all particles in the ensemble. We show the existence of a minimum region in which all particles can be driven and trapped indefinitely using the proposed control action. Under specific conditions, we guarantee the trapping of all particles in this region with probability 1. Finally, we demonstrate the efficacy of our control design in a simulation environment by trapping 100 Brownian particles in one, two and three dimensional homogeneous medium.     

Numerical computation for clustering of carbon particles with various sizes under both natural and magnetizing convections

The behavior of carbon particles from 0.01 to diameters in natural convection flow field of air was numerically studied including the effect of the magnetic field and the Brownian motion. One thousand carbon particles were released randomly in a vertical cylindrical enclosure whose height is equal to its radius. The enclosure was heated from below and cooled from above to produce the bulk flow of the natural convection of air in the atmospheric condition. A coil with electric current was set coaxially at the enclosure bottom to produce a magnetic field. Sample computations are carried out for the enclosure of 3 cm high and maximum magnetic field is 2.8 T or less. The results show that the natural convection of air is enhanced by the magnetic field. With the increase in the magnetic strength, more particles go along the fluid streak lines. With the increase in the particle size, more particles get together at the vortex center and cluster.     

Delay time compensation based on coefficient of restitution for collision hybrid motion simulator

A hybrid motion simulator embeds a hardware experiment in a numerical simulation loop. However, it is often subjected to the inherent problem of an energy increase in the collision of two pieces of hardware in a loop because of the delay time. This paper proposes a delay time compensation method based on contact dynamics model for a collision hybrid motion simulator under delay time and establishes a compensation method for coupled translational and rotational motion. The model developed in this paper describes linear uniform motion of a floating object during the period of the delay time until the force and torque are observed and non-linear motion according to environmental stiffness after the initial delay time period in contact. By using the above model, compensation parameters are designed based on desired coefficient of restitution with iterative calculation. The proposed method achieves accurate delay time compensation and simultaneously realizes a variable desired coefficient of restitution over a wide range of frequencies. Furthermore, the compensation method for multi-dimensional motion is established under the assumption that the friction effect is very small. The efficiency of the proposed method is verified through collision experiments for the coupled motion in two dimensions.     

Design and motion analysis of vibration-driven small robot Rizeh

Vibration mechanism is good candidates to be used as actuation system in small robots. However, mini fabrication of small electrical and mechanical drives is a challenging issue. Moreover, no analytical model for motion analysis of vibration driven robots is devised. In this paper, a small robot is developed. To setup a low-cost robot, cell phone vibrators are employed as actuation mechanism. Motion principle of the robot is analytically obtained and appropriate mechanical and electronic derives are designed. Some technical tips are employed to reduce the size of the robot. The obtained model was evaluated by simulations in MSC.ADAMS as well as some standard experiments on a real robot named Rizeh. Moreover, the robot is tested in a line following task, as a typical task for mobile robots.     

Reaching for redundant arms with human-like motion and compliance properties

This work proposes a redundant arm torque controller for reaching, guaranteeing desired completion time and accuracy requirements without the need for trajectory planning and prior knowledge of robot dynamics. The proposed controller is designed based on the prescribed performance control methodology and it is a reaching regulator in which the target pose for the hand acts as an attractor for the arm. It provides configuration consistency in return motions and hand and joint velocity smoothness. Its use in an admittance control scheme given measurements or estimates of external forces is also proposed providing active compliance capabilities in robot–environment interactions. Simulation studies for a 5dof human arm-like robot and experiments with a 7dof arm are performed to verify the approach and demonstrate the proposed controller’s performance.     

分子蒸馏技术与日用化工(Ⅰ)——分子蒸馏技术的原理及特点

介绍了分子蒸馏技术发展简况，并从分子运动平均自由程的定义出发，介绍了分子蒸馏技术的基本原理、特点以及与常规蒸馏、超临界萃取与层析分离等方法的不同。分子蒸馏操作温度低、受热时间短及分离效率高，特别适用于热敏性物质的提纯，有广阔的应用前景。     

混合材对水泥与减水剂适应性的影响研究

通过对掺高效减水剂水泥净浆流动性及流动性损失的测定试验，研究了3种混合材(粉煤灰、水淬高炉矿渣和沸石)在不同替代率情况下对减水剂作用效果的影响。结果表明：水淬高炉矿渣有利于改善减水剂与水泥的适应性，而掺粉煤灰和沸石(尤其是沸石)则会导致减水剂塑化作用的降低，而且浆体流动性损失也有增大趋势。     

基于OGC规范的多星多传感器卫星地面系统设计与实现

为解决传统卫星地面系统各业务功能单一、异构组织协作方面的不足, 提出了新型卫星地面系统的设计架构。以OGC(Open Geospatial Consortium)组织制定的空间信息服务标准为核心, 分别研究了卫星地面系统各业务系统的服务化, 给出了完整的新型卫星地面系统框架体系, 并进行了原型系统的开发和相关的应用实验。结果表明, 新型的卫星地面系统有助于实现多星多传感器的动态添加和跨组织协调合作。     

遥感器像移与图像参数的分析建模研究

卫星平台运动会产生恶化像质的像移,像移是影响遥感图像质量的重要因素.针对这种情况,建立了像移和图像参数的关系模型,可通过卫星生成图像的内在特征定量研究卫星成像过程中产生的像移,而不必通过产生像移的卫星平台等因素建立物理模型来研究像移.首先模拟了遥感器在轨成像过程,通过人工制造出影响因素的干扰获得了仿真图像数据,然后定量分析了像移与图像参数之间的相关性,选出了相关性较强且适合建模的图像参数,最后通过对这些图像参数构成的向量的降维得到了反映图像质量的综合参数,并建立了综合参数与像移的关系模型,以通过图像综合参数来计算像移.实验结果表明,这种模型能够很好地反映图像综合指标与像移之间的关系.该研究通过图像参数定量研究像移,为在轨运行卫星的遥感器像移与外景条件下的遥感图像要素的相关建模研究提供了部分技术支持.     

WATER MIST FLOW IN A SUPERCONDUCTING MAGNET INCLINED AT VARIOUS ANGLES

Water mist (diamagnetic) flow in a superconducting magnet of 10 T at various angles is studied experimentally and numerically. Water mist is produced by ultrasonic atomizers and fed into a cylindrical Plexiglas pipe (inner diameter, 90 mm) placed in a bore space of an inclined superconducting magnet. The water mist is found to stop at some locations in the magnet at inclined angles ψ ≤ π/6. At ψ ≥ π/4, the amount of mist flowing out of the other opening of the pipe increases with an increase in inclined angle. In the computation of this phenomenon, water mist is simulated with 1000 water droplets of 3 μm diameter. Brownian motion is considered and the Langevin equation is solved. The numerical results show that at ψ ≤ π/6, most of the water droplets accumulate above the magnetic coil. However, at ψ ≥ π/4, with an increase in inclined angle, the number of water droplets passing through the magnetic coil increases.