超高增压柴油机与斯特林发动机复合运行的分析

本文对超高增压柴油机与斯特林发动机的复合运行进行了初步的探讨,陈述了这种复合运行作为未来发动机技术发展方向之一的可能性。     

浅谈前海物流园规划构想

探讨了深圳前海物流园区的地理条件及发展的重要因素，针对其存在的交通设施不足，管理不到位等问题进行了分析，并结合功能定位从用地规模、功能布局等方面提出了规划设计构想。     

磁场和库仑场对量子点中强耦合束缚极化子性质的影响

采用线性组合算符和幺正变换方法研究了磁场和库仑场对半导体量子点中强耦合极化子性质的影响.导出了强耦合束缚磁极化子的振动频率和基态能量与量子点的有效受限长度、库仑束缚势、磁场的回旋共振频率和电子-声子耦合强度的变化关系.数值计算结果表明:强耦合束缚磁极化子的振动频率和基态能量随量子点的有效受限长度的减小而迅速增大,随磁场的回旋共振频率的增加而增大.基态能量随电子-声子耦合强度和库仑束缚势的增加而减少.     

高频地波雷达相位补偿系统

OSMAR2000采用的是“一发八收,收发共用”模式的相控阵高频地波雷达.为了扩大其探测的范围,在新的雷达系统中将采用多发多收的模式,从而导致当信号通过通道后,信号的相位会因受到通道的调制而发生改变,使得雷达无法正常工作,因此需要对通道的相位进行实时监控和补偿.在参考了低频段的相位测量原理和射频段的相移电路的设计理论的基础上,该文提出了基于差分放大器、容阻和容感器件的高频地波雷达收发通道的相位控制系统.     

主轴回转精度测试中的多圈数据采集及处理

本文就主轴回转精度测试中的多圈数据采集和处理方法作了探讨。根据提出的方法和改进后的测试系统编制了实用程序,进行了实测,获得了测试结果。     

数控螺纹车削的单步插补控制法

分析了运动控制芯片MCX34的控制原理及单步插补实现过程，提出了基于运动控制芯片MCX314实现螺纹切削的单步插补控制法，从而实现快速，高效的螺纹加工。该方法控制过程简单 ，同步实现锥螺纹，控制精度高（0.001mm），响应快（≤1.6MHz)，脉冲确保不丢失，解决了数控螺纹车削存在的一系列关键问题。     

不均匀地基上的基础设计

通过对在不均匀地基条件下的某教学楼基础设计的分析，确定了一种经济可行的基础形式，以解决不均匀地基条件的基础设计问题，进而为同类工程设计提供了借鉴。     

High accuracy path tracking for vehicles in presence of sliding: Application to farm vehicle automatic guidance for agricultural tasks

When designing an accurate automated guidance system for vehicles, a major problem is sliding and pseudo-sliding effects. This is especially the case in agricultural applications, where five-centimetre accuracy with respect to the desired trajectory is required, although the vehicles are moving on slippery ground. It has been established that RTK GPS was a very suitable sensor to achieve automated guidance with such high precision: several control laws have been designed for vehicles equipped with this sensor, and provide the expected guidance accuracy as long as the vehicles do not slide. In previous work, further control developments have been proposed to take sliding into account: guidance accuracy in slippery environments has been shown to be preserved, except transiently at the beginning/end of curves. In this paper, the design of this control law is first recalled and discussed. A Model Predictive Control method is then applied in order to preserve accuracy of guidance even during these curvature transitions. Finally, the overall control scheme is implemented, and improvements with respect to previous guidance laws are demonstrated through full-scale experiments.     

The Influence of Medium on Low-Voltage Circuit Breaker Arcs

This paper mainly focuses on the influence of three kinds of media： air, air-10%PA （Nylon） and air-10% POM （polyoxymethylene） on low-voltage circuit breaker arcs. A threedimensional （3-D） model of arc motioa under the effect of external magnetic field is built based on magnetohydrodynamics （MHD） equations. By adopting the commercial computational fluid dynamics （CFD） package based on the control-volume method, the above MHD equations are solved. For the media of air-10%PA and air-10%POM, the distributions of stationary temperature and electrical potential and the transient motion processes are compared with those of air arc. The research shows that both air-10%PA and air -10% POM can cool the arc plasma and the former is more effective. Both of them can increase the stationary voltage as well. Moreover, the presence of the two mixtures can accelerate the arc motion toward the quenching area and ensures the arc quenched in time.     

Quality assessment of SRTM C- and X-band interferometric data: Implications for the retrieval of vegetation canopy height

The Shuttle Radar Topography Mission distinguished itself as the first near-global spaceborne mission to demonstrate direct sensitivity to vertical vegetation structure. Whether this sensitivity is viewed as exploitable signal or unwanted bias, a great deal of interest exists in retrieving vegetation canopy height information from the SRTM data. This study presents a comprehensive application-specific assessment of SRTM data quality, focusing on the characterization and mitigation of two primary sources of relative vertical error: uncompensated Shuttle mast motion and random phase noise. The assessment spans four test sites located in the upper Midwestern United States and examines the dependence of data quality on both frequency, i.e., C-band vs. X-band, and the number of acquired datatakes. The results indicate that the quality of SRTM data may be higher than previously thought. Novel mitigation strategies include a knowledge-based approach to sample averaging, which has the potential to reduce phase noise error by 43 to 80%. The strategies presented here are being implemented as part of an ongoing effort to produce regional- to continental-scale estimates of vegetation canopy height within the conterminous U.S.