大功率开关电源的设计与实现

介绍了开关电源设计中需要考虑的几个基本问题,包括频率的确定、最大占孔比Dm的确定、逆变变压器的设计和开关功率管的选择,并以一种1 kW的PWM大功率半桥式开关电源为例,详细介绍实际的开关电源设计方案,并给出了实验结果.     

现代电子产品焊接质量的检测技术

介绍了现代电子产品焊接质量的检测技术,以及用于检查焊点质量和组装板(SMA)功能的测试仪器的工作原理及测试能力.目前常见和广泛使用的焊接质量检测方法是人工目测检查,其主要问题是其主观性,只能用来检测电子元件的形状、尺寸、颜色、表面特征及焊点的外观质量;自动光学检测(AOI)可以在整个过程中发现和纠正缺陷,但只是外在的焊点缺陷;激光/红外线组合式检测系统、X射线检测系统可以分析焊点微米级水平的缺陷,能找出其他检测所不能可靠地发现的缺陷,包括空洞、焊点形状差和冷焊锡点等;另外,X射线检测系统能一次测试单面或双面电路,准确地定位缺陷,获取工艺参数,例如锡膏厚度等.     

光纤荧光传感器衰减寿命的加权对数拟合法

荧光寿命的检测是荧光光学传感器的核心内容，国际上尝试了多种方法来拟合这种理论上为单指数衰减信号的荧光衰减曲线。这些方法包括非线性函数标准拟合方法。即Levenburg-Marquardt方法，以及Prony方法、FFT方法，对数拟合法等等。为了克服在实际应用中发生的信号退化，需要在测量信号衰减寿命的同时测量信号的初始强度。文章介绍了一种加权的对数拟合法，经计算机仿真及实际数据测试均可以得到和Levenburg-Marquardt方法非常接近的结果，且拟合时间大大缩短，测量稳定性大大提高。仿真测试及具体实验测试结果显示了这种方法的有效性。该方法不仅与Levenburg-Marquardt方法的偏差曲线非常相似，而且实验测得的荧光寿命与Levenburg-Marquardt方法偏差在0．2％以内。     

InP基应变补偿结构偏振不灵敏半导体光放大器制作的研究

为了制备偏振不灵敏的半导体光放大器(SOA)，将有源区设计为由4个压应变、3个张应变阱层及晶格匹配的垒层InGaAsP交替组合而成的应变补偿结构。器件做成带有倾角的扇形脊形波导结构，避免了常规制作SOA的复杂工艺。对样品3在80～125mA电流范围内，获得了偏振灵敏度≤0．6dB．最小可达0．1dB；较大的电流范围内FWHM值为40nm。     

Full Complex Amplitude Digital Holograms： Design, Fabrication and Optical Characterization

Diffractive optical elements have a large number of industrial applications, such as beam shaping and optical filtering. Traditionally, these elements modulate the phase of the incoming light or its amplitude, but not both. To overcome this limitation, full complex-amplitude modulation diffractive optical elements were developed. Well-established integrated circuit fabrication steps were employed to fabricate the devices with high precision. Using this approach, the new element‘s optical performances are improved also for near field operations. With this device it is possible to obtain 100% efficient spatial filtering and low noise reconstructed images.     

一种基于PWM的半桥型开关电源

主要介绍了由SG3525组成的半桥型开关稳压电路的结构和工作原理，阐述了PWN集成电路SG3525的特性和主要功能。实践表明：该系统工作稳定，运行效果良好。     

BPxN1-x薄膜的制备及磷元素对其光学能隙的影响

本文从应用出发，选择光学石英为衬底，采用热丝辅助射频化学气相沉积的方法沉积BPxN1—x薄膜，对样品进行了X射线衍射(XRD)、扫描电子显微镜(SEM)、紫外—可见等测试。XRD、SEM结果显示薄膜多晶态，表面形貌随时间变化，最终为胞状；紫外—可见光光谱结果显示BPxN1—x薄膜的紫外吸收边随沉积时间的加长、PH3流量的增加而向长波长方向移动。因此，该材料的光学能隙可以通过生长工艺适当调整。另外，BPxN1—x薄膜与液晶层能较好匹配等特性更使其适用于紫外空间光调制器。     

Dynamic Waveband Switching in WDM Mesh Networks Based on a Generic Auxiliary Graph Model

Waveband switching (WBS) is a promising technique to reduce the switching and transmission costs in the optical domain of a wavelength-division multiplexing (WDM) network. This paper considers the problem of provisioning dynamic traffic using WBS in a WDM mesh network. The network of interest is a homogeneous WBS network, where each node has the functionality of WBS. The problem is called the dynamic WBS problem, which involves searching waveband-routes or wavelength-routes for the dynamically arriving traffic requests. The objective is to minimize the total switching and transmission costs in the optical domain. To solve the dynamic WBS problem, an auxiliary graph model capturing the network state is proposed. Based on the auxiliary graph, two heuristic on-line WBS algorithms with different waveband grouping policies are proposed, namely the wavelength-first WBS algorithm based on the auxiliary graph (WFAUG) and the waveband-first WBS algorithm based on the auxiliary graph (BFAUG). Simulation results indicate that WBS is an attractive technique which reduces the overall switching and transmission costs by up to 30% in the network. The results also show that the WFAUG algorithm outperforms the BFAUG algorithm in terms of port savings and cost savings.     

不锈钢管子—管板的激光焊接

试验研究了不锈钢的深溶焊接。研究了聚焦光束回转的光具。在工件不动的情况下,焊接管子—管板连接环缝。焊缝质量满足压力容器的要求,焊接效率大大提高。     

光学系统中离轴性公差的计算机设计

运用不共轴光学系统的光路计算和象质评价理论，通过共轴光学系统中光学表面，光学元件，部件的小位移和微倾斜，对切比雪夫综合象质函数计算相应的有关限差分，以掌握各种离轴性误差对象质的危害程度，再按多元函数的极值理论和适应度性优化技术自动妥共轴光学系统中各种轴性公差，并进行反馈和非线性处理；达到公差的最优化分配。