山区水库溢洪道和放水洞工程布置优化组合及型式选择

山区河流上修水库与平原水库不同的是，地形复杂、地质条件各异。要充分利用坝址处的地物地貌及地质条件，如何趋利避害，合理布置水库的土坝走向，放水洞与溢洪道的位置及型式，以取得安全、经济、美观三者协调统一。     

Structural and electrical properties of brush plated ZnTe films

Zinc telluride thin films were deposited by the brush plating technique at a potential of −0.90 V (SCE) on conducting glass and titanium substrates at different temperatures in the range 30–90 °C. The films were polycrystalline in nature with peaks corresponding to the cubic phase. Direct band gap of 2.30 eV was observed. XPS studiers indicated the formation of ZnTe. Depth profiling studies indicated a uniform distribution of Zn and Te throughout the entire thickness. EDAX measurements were made on the films and it was found that there was a slight excess of Te. The carrier concentration was found to vary from 10¹⁴–10¹⁵ cm⁻³ with increase of substrate temperature. The mobility was found to vary from 5 to 60 cm² V⁻¹ s⁻¹.     

昆2井优快钻井及油气层保护技术

昆2井是一口位于柴北缘西段的昆特依凹陷潜伏Ⅰ号圈闭上的风险探井,设计井深为5950m。针对柴北缘深探井存在的主要技术难题,制定了昆2井的技术对策。通过对钻井设备的优选、井身结构的优化、钻头及钻具组合的优选、钻井参数及钻井液性能的优化、油气层保护技术的研究与应用,形成了一套适合于柴北缘的优快钻井技术,使昆2井的完钻井深达到5950m。与邻区的深探井平均水平相比,在井深增加888m、大尺寸井眼段更长的前提下,昆2井的钻井、完井周期分别缩短了98.75d、124.2d,钻机月速度增加了317m/台,平均机械钻速增加了0.82m/h。根据“理想充填新理论”,确定了保护油气层的最优复配暂堵方案,利用该方案所配制的钻井液其渗透率恢复值达到了87.5%以上,流变性能良好,滤失量低,对改善泥饼质量、增强井壁稳定性有明显的效果。     

天生桥梯级水电站联合调度决策支持系统建设经验

决策支持系统是水库优化调度实用化的发展方向，对于提高水电站生产效益和水库调度管理水平具有重要意义。结合国电公司重点科技项目“天生桥梯级水电站联合调度决策支持系统”的开发，阐述了开发水电调度决策支持系统实现水库调度实用化的经验:正确反映用户需求、增强用户对系统的控制、用模拟仿真弥补优化调度的不足、用数据库技术扩展水库优化调度实用化功能。     

Testing of electrochromic materials using symmetrical devices

“Symmetric materials” devices, where both electrodes are made of the same electrochromic materials, allow the in situ study of side reactions. Each transferred charge that is not used for the expected electrochromic reaction will cause a colour change in the whole symmetric device. Two electrochromic materials, WO₃ and IrO₂, are successively used to show how to obtain information about side reactions such as faradaic efficiency, reversibility and potential limits from the symmetric experiment. This in situ approach with a polymer electrolyte shows significant differences compared to results obtained with studies in aqueous electrolytes.     

Polyaniline-multiwalled carbon nanotube composites: Characterization by WAXS and TGA

Polyaniline/carboxylated multi-walled carbon nanotube (PAni/c-MWNT) nanocomposites have been synthesized by micellar aided emulsion polymerization with various c-MWNTs compositions, viz., 0.5, 1, 5, and 10 wt %. The microcrystalline parameters such as the nanocrystal size (〈N〉), lattice strain (g), interplanar distance (d_hkl), width of the crystallite size distribution, surface weighted crystal size (D_s), and volume of the ordered regions were calculated from the X-ray data by using two mathematical models, namely the Exponential distribution and Reinhold distribution methods. The effects of heat ageing on the microcrystalline parameters of the PAni/c-MWNT nanocomposites were also studied and the results are correlated. The thermal stability and electrical resistivity of the PAni/c-MWNT nanocomposites were examined with thermogravimetric analysis (TGA) and a conventional two-probe method. The TGA data indicate that the thermal stability of the nanocomposites improved after the incorporation of c-MWNTs. The influence of temperature on the resistivity of the nanocomposites was also measured. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci 2008     

Novel approach in investigation of the poly(acrylic acid) hydrogel swelling kinetics in water

The swelling kinetics curves of structurally defined poly(acrylic acid) hydrogel in bidistilled water at temperatures: 25, 30, 35, 40, and 45°C were determined. The possibility of kinetically explaining the isothermal swelling process by applying the following models: reaction controlled by diffusion, first order chemical reaction kinetics, and second order chemical reaction kinetics, was investigated. It was found that kinetically explaining the swelling process using these methods was limited to only certain parts of the process. The swelling process in bidistilled water was described in full range assuming that the hydrogel's swelling rate was a kinetically controlled reaction by the rate of the movement of reactive interface of hydrogel. Based on that model, the kinetic parameters, activation energy (E_a) and preexponential factor (A), of the swelling process were determined to be E_a = 35 kJ/mol and lnA = 8.6. A possible mechanism of the investigated swelling process was discussed. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

CX6112车铣复合机床设计方案的研究与探讨

文章较系统地论述了车铣复合机床设计方案的形成过程，同时分析了该设计方案的持点，并简要介绍了该产品的主要技术参数和用途，简评了该产品的技术水平。     

Bullwhip reduction for ARMA demand: The proportional order-up-to policy versus the full-state-feedback policy

A ‘proportional’ order-up-to policy reacting to ARMA demand is analyzed using stochastic optimal control theory. This policy is compared with a full-state-feedback order-up-to policy. Necessary conditions for an optimum of a weighted sum of the inventory and the ordering variances for both policies are formulated. Based on this a relatively simple expression for the ‘full-state’ policy is derived. The comparison between the two policies demonstrates that the ‘intuitively’ designed proportional policy does not fulfill the objective of controlling both the inventory and ordering variance for all parameter values of the demand model as well as the full-state-feedback policy. The full-state-feedback policy outperforms the proportional policy in several aspects.     

长治市水资源优化配置及对策

文中介绍了长治市水资源的特点和水资源开发利用现状，并总结了长治市水资源开发利用中存在的问题。针对性地提出了合理配置水资源、建设节水型社会、开发新水源、建立高效运行管理体制、运用市场经济机制以及改革现行的水价政策等一系列措施．从而实现全市水资源的优化配置和合理使用，促进全市经济的全面发展。