Explicit numerical simulation of suspension flow with deposition in porous media: influence of local flow field variation on deposition processes predicted by trajectory methods

A new explicit numerical simulation (ENS) method based on lattice-gas automata (LGA) is introduced here for the flow of solid/fluid suspensions with deposition in porous media. The ENS method explicitly resolves the dynamics of the individual solid particles and the suspending fluid in the domain defined by the pore walls and solid particle surfaces. After describing the new method, it is applied to the study of solid/fluid suspension flow with deposition in a constriction and in a model random porous solid. This study clearly demonstrates that the deposits strongly influence the local flow fields, which in turn affect the deposition process indicating that this interplay should be modelled if accurate results are desired from trajectory methods.     

Insect sex pheromones

The half-lives (t _1/2) for evaporative loss ofn-alkyl andn-alkenyl acetates from rubber septa were determined at temperatures varying from 15 to 35 °C. The changes int _1/2 with temperature gave high correlations with the equation, Int _1/2 = H/RT+y _o where H is the heat of vaporization,R is the gas constant,T is the absolute temperature, andy _o is a constant. Half-lives changed dramatically with temperature and the degree of change with temperature increased with increasing molecular weight. For mixtures, component ratios changed with temperature, but the degree was modest. At 20 °C there was a 7.5-fold ratio oft _1/2 between members of the homologousn-alkyl orn-alkenyl acetates differing by two carbon atoms. The large change int _1/2 with temperature and with number of carbon atoms is a consequence of the thermodynamic relationships and the temperature range of pheromone usage. Therefore, a similar degree of change inf _1/2 with temperature and number of carbon atoms will apply to other formulations of the same type (those in which the rate of evaporation is first order). The values oft _1/2 at 20 °C mainly agreed very well with those reported previously at room temperature. However, our previously reported values for pentadecyl and hexadecyl acetate were revised. Half-lives were shown to depend on the vapor pressure of a compound in the formulation substrate, but not on the vapor pressure of the pure compound.Mention of a commercial or proprietary product does not constitute an endorsement by the USDA.     

Modeling and global trajectory tracking control for an over-actuated MAV

This paper deals with an original micro aerial vehicle (MAV) design, the Omnicopter MAV. It has two central coaxial rotors with fixed-pitch propellers and three perimeter mounted ducted fans with servo motors performing thrust vectoring. Compared with traditional rotary wing MAVs that have inherent underactuation, the Omnicopter possesses some advantages in mobility, for example, lateral translation with zero attitude and hover with nonzero attitude. The trajectory tracking control design, global stability analysis, and control allocation are demonstrated through numerical simulation. The advantage of zero attitude translation is illustrated through experimental results.     

基于轨迹频率抑制的轨迹隐私保护方法

移动终端和定位技术的快速发展带来了轨迹大数据.研究者通过挖掘和分析发布的轨迹数据集,可获得一些有价值的信息.攻击者也可利用所掌握的知识对发布的轨迹数据集进行推理分析,以较高的概率推断出用户的隐私信息.轨迹抑制是一类实现隐私保护的重要方法,然而轨迹抑制的点数越多会造成数据效用越低.因此,在满足用户隐私需求的情况下,如何选择合理的抑制点来提高匿名处理后的数据效用是数据发布中要解决的重要问题.针对以上问题,文中提出两种基于轨迹频率的方案对轨迹数据进行匿名处理.第一种方案是根据情况抑制整条有问题的轨迹数据或向有问题的轨迹数据集中添加假数据;第二种方案是采用特定的轨迹局部抑制法对数据进行抑制处理.实验表明相对于已有方案,在满足同等隐私需求的情况下,文中方案处理后的数据效用提升了近30%.     

Smart grid coordination in building HVAC systems: EMPC and the impact of forecasting

Energy consumption by heating, ventilation, and air conditioning (HVAC) systems exhibits a clear correlation with electricity prices. The method of economic model predictive control (EMPC) can be used in conjunction with thermal energy storage (TES) to time-shift power consumption away from periods of high demand to periods of low energy cost. Dynamic electricity pricing and weather condition forecasts can be readily incorporated within this methodology. Unfortunately, the receding horizon nature of this control strategy makes it very susceptible to the quality of the forecasts used. To this end, the development and implementation of several forecasting methods will be discussed. Finally, the EMPC performance of these methods will be assessed on a simple building example using active TES.     

压缩感知中高斯矩阵的优化研究

为了优化高斯矩阵,对部分哈达玛矩阵与高斯矩阵的统计学参数作了对比分析,确定了导致部分哈达玛矩阵信号重构能力好的主要因素,并提出了高斯矩阵优化算法.验证了优化算法对不同规模高斯矩阵的通用性和有效性,确定了优化矩阵对各种稀疏信号重构算法的适用性.最后对优化矩阵的性能作了初步的理论和实验分析,优化矩阵的信号重构能力可达到、甚至超过哈达玛矩阵.研究成果为测量矩阵的分析、设计和优化提供了新的思路和方法.     

Effect of alkali and alkaline earth metals on nitrogen release during temperature programmed pyrolysis of coal

Formation of HCN, NH₃, and N₂ during fixed-bed pyrolysis at 10K min⁻¹ has been studied using coal samples after partial demineralization followed by addition of metal hydroxides from aqueous systems. Without additives, NH₃ is the predominant product at ≤ 700°C, showing the two peaks in the formation rate profile, whereas N₂ is the only product at ≥ 800°C. The presence of NaOH, KOH and Ca(OH)₂ promotes considerable NH₃ formation between 450 and 600°C, but in contrast suppresses HCN formation in this region. The Ca shows the largest effect on both the promotion and suppression. It is likely that the NH₃ increased by Ca addition arises partly from HCN, but mainly from secondary reactions of tar-N. These hydroxides affect N₂ formation in quite different manners: the Na decreases the rate between 700 and 950°C, and the K changes it less significantly than the Na, but the Ca remarkably increases the rate in a low temperature region of 550–700°C. These different features are discussed in terms of solid-phase reactions of alkali metal carbonates with char-N and secondary decomposition reactions of tar-N on CaO particles. As a result, total conversion of coal-N to HCN, NH₃ and N₂ up to 1000°C increases in the sequence of Na < none < K < Ca.     

具有数据包丢失的离散随机不确定系统的线性最优满阶估值器

研究了具有数据包丢失和随机不确定性离散随机线性系统的状态估计问题.其中数据包丢失是随机的,且满足Bernoulli分布,系统矩阵中的随机不确定性由一个白色乘性噪声来描述.首先,通过配方方法,提出了最小均方意义下的无偏最优线性递推满阶滤波器.所提出的滤波器用到了当前时刻和最近时刻接收到的观测来保证线性最优性.与多项式滤波和增广滤波器相比,本文的滤波器具有较小的计算负担.然后,基于所获得的线性滤波器推导了线性最优预报器和平滑器.进一步研究了线性最优估值器的渐近稳定性,给出了稳态特性存在的一个充分条件.最后,通过两个仿真例子验证了所提估计算法的优越性.     

基于二次型性能指标的混合动力汽车实时优化控制

为解决混合动力系统实时优化控制问题,本文提出了一种基于二次型性能指标最优的混合动力汽车功率分配优化方案.通过合理的假设和近似,建立了混合动力系统的线性模型,并利用二次型最优控制理论将混合动力最优控制问题转化为二次型最优调节问题进行求解,得到了一个结构简单的实时优化控制算法.5种道路工况下的仿真结果表明,本文提出的控制方法在未来道路工况未知的情况下能够实现混合动力系统的实时优化控制,且节油率与离线计算以燃油消耗最小为性能指标的全局最优控制的节油率相近.     

不同重力环境的空间机械臂自抗扰轨迹跟踪控制

针对空间机械臂在地面装调与空间应用时,由于重力环境变化导致机械臂模型发生变化的问题,提出了一种自抗扰控制算法,用于完成空间机械臂轨迹跟踪控制的任务.该算法通过将系统模型及未知外扰作为系统的总和扰动,并利用扩张状态观测器对该扰动进行观测且给予补偿,从而提高了系统抗扰的性能.当机械臂模型随重力环境变化而发生变化时,使用同一个自抗扰控制器对其末端轨迹进行控制,均能取得较好的控制效果.通过对系统的稳定性进行分析,证明了所设计控制器的有效性.将仿真结果与PD控制及自适应鲁棒控制做比较,结果表明该控制算法不仅能适应机械臂模型的变化而且还能有效抵抗系统的扰动,从而使系统具有较强的鲁棒性.