0.618法最优确定盘状摆动凸轮机构的最小基圆半径

在满足机构许用压力角条件下,采用０．６１８法最优确定盘状摆动凸轮机械的最小基圆半径。     

蒙古文整词计算机生成理论研究

采用面向对象方法,模拟传统蒙古文整词各种形式构成机理,提出了几种蒙古语整词计算机生成数据模型。文章主要依据整词计算机生成三种模型,探讨了传统蒙古文整词计算机最优化生成理论所涉及的精确度、时间复杂度、空间复杂度三项基本要素以及最优化生成必须考虑的整词复杂特征载荷与一体化合一计算知识表示方法和计算结构,证明了“B - J - T= W”数据模型是传统蒙古文整词计算与生成最优化对象模型。     

Further remarks for the matrix type-B codes

Different philosophies lie behind the detecting and correcting error patterns in a real communication channel. The sceptic points in choosing an efficient code, specifically the matrix type-B code, were pointed out in Refs. 1 and 2.Some more points are shown here. As a result the matrix type-B code is found to be a best choice. Some more theoretical aspects for this code are also given. These are useful for the realization and testing of an encoding-decoding algorithm with IC's used in a unique way for its implementation.     

基于小波分析和有限元法的高维结构优化

结构优化问题的全局最优解一般位于可行域的边界面上,本文利用有限元法来对复杂结构进行分析,借助小 波分析采寻找可行域边界面上的离散点,从而得出高维结构优化问题的全局最优解。     

建筑结构服役全过程可靠性概念注记

从建筑结构的可维修性出发,根据结构从设计到服役直至破坏全过程各阶段综合抗力和综合荷载效应的不同特点,详细探讨了结构各阶段概率极限状态设计中可靠性概念的实质涵义。对结构设计及正常使用过程中结构动态可靠度水平的识别和控制有一定的意义     

交流电弧炉智能集成计算机控制系统

系统以工控机为中心,配以高性能的模块化外设组成一体化的计算机控制系统。采用温度控制外环和电流平衡控制内环的双环路结构来具体实现交流电弧炉温度和三相电流平衡的智能集成控制。外环采用模糊、神经网络和优化决策共同控制,内环则采用模糊专家解耦控制。系统能实时自适应炉况状态的变化,提高生产效率,降低电能及电极消耗。实际运行证明该系统具有良好的鲁棒性和实时性。     

碳酸盐岩储层多级注入闭合酸压技术研究与应用

本文阐述了针对陕甘宁盆地中部气田碳酸盐岩低渗储层的特点,采用系统工程方法开展的多级注入闭合酸压技术研究,介绍了利用研制的多级注入、二维及拟三维酸压设计软件模拟研究所获得的一些重要认识;提出了该项技术的现场设计原则及效果评估方法,介绍了现场应用效果。文中强调指出,对低渗及特低渗碳酸盐岩气藏,多级注入闭合酸压技术是最好的增产措施。     

平面组合连杆机构的多目标优化设计及仿真

为使平面连杆机构满足运动平稳、传动效率高、结构尺寸小等多重要求,对某高频率工作的四连杆机构与曲柄滑块机构组成的组合机构建立了模型,以杆长比为设计变量,以加速度绝对值的最大值、压力角最大值及连杆长最小为目标函数,应用统一目标法的线性加权和法,对其各杆长度进行了多目标优化设计,得到了最佳机构。并应用Matlab／Simulink软件,对优化后的机构运动特性进行了模拟仿真。仿真结果表明,优化后的机构具有较好的运动特性,可满足各项要求。     

Analysis of LDPC with optimum combining

Low density parity check (LDPC) codes have shown exceptionally good performance for single antenna systems over a wide class of channels. LDPC when implemented with a single input multiple output system with maximum ratio combining is optimum from the standpoint of maximising signal-to-noise ratio at combiner output without the presence of interferer. Optimum combining outperforms maximal ratio combining (MRC) in the presence of interferer(s). In this article, the performance of the LDPC codes with multiple receiver antennas with optimum combining in the presence of single interferer is investigated. The simulation results showed that LDPC codes of irregular construction are able to give high coding and diversity gain with optimum combining. The proposed LDPC optimum combined (LDPC–OC) system in Rayleigh fading channel in the presence of a single interferer improves the signal to interferer plus noise ratio by 2.62 dB with four receiver antennas and by 1.98 dB when the number of receiver antennas is three.     

Pareto-optimal clustering scheme using data aggregation for wireless sensor networks

The presence of cluster heads (CHs) in a clustered wireless sensor network (WSN) leads to improved data aggregation and enhanced network lifetime. Thus, the selection of appropriate CHs in WSNs is a challenging task, which needs to be addressed. A multicriterion decision-making approach for the selection of CHs is presented using Pareto-optimal theory and technique for order preference by similarity to ideal solution (TOPSIS) methods. CHs are selected using three criteria including energy, cluster density and distance from the sink. The overall network lifetime in this method with 50% data aggregation after simulations is 81% higher than that of distributed hierarchical agglomerative clustering in similar environment and with same set of parameters. Optimum number of clusters is estimated using TOPSIS technique and found to be 9–11 for effective energy usage in WSNs.