1，4，5，8-四硝基-1，4，5，8-四氮杂双环[4.4.0]癸烷合成工艺的改进?

为了改进1,4,5,8-四硝基-1,4,5,8-四氮杂双环[4.4.0]癸烷(TNAD)的合成方法,以1,4,5,8-四氮杂双环[4.4.0]癸烷(THAD)为原料,经成盐、硝化两步反应合成出了TNAD,反应总收率为90%,纯度为98.7%。采用红外光谱、核磁共振氢谱及元素分析对产品结构进行了表征。考察了硝化体系、物料比、反应温度、反应时间对硝化反应的影响,确定了最佳的反应条件:n(THAD.4HNO_3):n(98%HNO_3):n(AC_2O)=1:24:15,反应温度为25℃,反应时间为2 h。     

太阳能电池有机电子传输材料研究新进展

当今能源危机问题日益紧迫,以太阳能为代表的新能源开发成为研究热点。有机半导体材料具有成本低廉、可塑性强、性能优异等特点,因此在太阳能电池领域中具有极大的应用前景。研发性能优异、成本低、稳定性高的有机电子传输材料是太阳能电池研究领域的重要内容。总结了近年来有机电子传输材料的研究进展和发展方向,按照其分子结构分为富勒烯衍生物、大π共轭体系、非π体系、改性材料、碳纳米材料等5类体系,分别介绍了其结构特性,讨论了其在太阳能电池应用中存在的问题及解决方法,综述了该领域的最新研究成果,最后总结了开发新型高效的有机电子传输材料的研究方向。     

1，3-双（叠氮乙酰氧基）-2-乙基-2-硝基丙烷的合成与性能

以2-乙基-2-硝基-1,3-丙二醇为原料,经酯化、叠氮化两步反应,合成出了1,3-二(叠氮乙酰氧基)-2-乙基-2-硝基丙烷(ENPEA),总收率为83%。利用红外光谱、核磁共振、元素分析对ENPEA的结构进行了表征。探讨了叠氮化反应的影响因素,确定其最佳反应条件为:n(Na N3)n(ENPE)为2.21.0,混合溶剂中水占总体积的13%~20%,反应时间2 h;性能测试得到ENPEA的玻璃化转变温度为-43.4℃,热分解峰温为252.4℃,密度为1.34 g/cm3,特性落高为120.2 cm(落锤2 kg),爆炸概率为4%(摆角66°)。     

ZIF‐8/ZIF‐67‐Derived Co‐Nx‐Embedded 1D Porous Carbon Nanofibers with Graphitic Carbon‐Encased Co Nanoparticles as an Efficient Bifunctional Electrocatalyst

Herein, an approach is reported for fabrication of Co‐N_x‐embedded 1D porous carbon nanofibers (CNFs) with graphitic carbon‐encased Co nanoparticles originated from metal–organic frameworks (MOFs), which is further explored as a bifunctional electrocatalyst for both oxygen reduction reaction (ORR) and oxygen evolution reaction (OER). Electrochemical results reveal that the electrocatalyst prepared by pyrolysis at 1000 °C (CoNC‐CNF‐1000) exhibits excellent catalytic activity toward ORR that favors the four‐electron ORR process and outstanding long‐term stability with 86% current retention after 40 000 s. Meanwhile, it also shows superior electrocatalytic activity toward OER, reaching a lower potential of 1.68 V at 10 mA cm^?2 and a potential gap of 0.88 V between the OER potential (at 10 mA cm^?2) and the ORR half‐wave potential. The ORR and OER performance of CoNC‐CNF‐1000 have outperformed commercial Pt/C and most nonprecious‐metal catalysts reported to date. The remarkable ORR and OER catalytic performance can be mainly attributable to the unique 1D structure, such as higher graphitization degree beneficial for electronic mobility, hierarchical porosity facilitating the mass transport, and highly dispersed CoN_xC active sites functionalized carbon framework. This strategy will shed light on the development of other MOF‐based carbon nanofibers for energy storage and electrochemical devices.     

The Influence of Carbon Nitride Nanosheets Doping on the Crystalline Formation of MIL‐88B(Fe) and the Photocatalytic Activities

In this research, bulk graphitic carbon nitride (g‐C₃N₄) is exfoliated and transferred to the carbon nitride nanosheets (CNNSs), which are then coupled with MIL‐88B(Fe) to form the hybrid. From the results of the powder X‐ray diffraction, scanning electronic microscopy and thermogravimetric analysis, it is found that the doping of CNNSs on the surface of MIL‐88(Fe) could maintain the basic structure of MIL‐88B(Fe), and the smaller dimension of CNNSs might influence the crystallization process of metal‐organic frameworks (MOFs) compared to bulk g‐C₃N₄. Besides, the effects of the CNNSs incorporation on photocatalysis are also investigated. Through the photoluminescence spectra, electrochemical measurements, and photocatalytic experiments, the hybrid containing 6% CNNSs is certified to possess the highest catalytic activity to degrade methylene blue and reduce Cr(VI) under visible light. The improvement of the photocatalytic performance can be attributed to the matched energy level which favors the formation of the heterojunctions. Besides, it promotes the charge migration such that the contact between MOFs and CNNSs is more intimate, which can be inferred from the electronic microscopy images. Finally, a possible photocatalytic mechanism is put forward by the relative calculation and the employment of the scavengers to trap the active species.