An improved bacterial foraging algorithm for combined static/dynamic environmental economic dispatch

Economic dispatch is carried out at the energy control center to find out the optimal output of thermal generating units such that power balance criterion is met, unit operating limits are satisfied and the fuel cost is minimized. With growing environmental awareness and strict government regulations throughout the world, it has become essential to optimize not only the total fuel cost but also the harmful emissions, both, under static as well as dynamic conditions. The static environment economic dispatch finds the optimal output of generating units for a fixed load demand at a given time, while the dynamic environmental economic dispatch schedules the output of online generators with changing power demands over a certain time period (normally one day) so as to minimize these two conflicting objectives, simultaneously. In this paper, the price penalty factor approach is employed for simultaneous minimization of cost and emission. The generator ramp rate constraints, non-convex and discontinuous nature of cost function and the large number of generators in practical power plants, make this problem very difficult to solve. Here, a fuzzy ranking approach is employed to identify the solution which offers the best compromise between cost and emission objectives.     

一种高效的同尺寸长方体的装箱算法

针对应用广泛的同尺寸长方体货品的装箱问题,本文运用分层装载方案,根据货品的长宽高采用三种不同的层高,利用动态规划算法分别计算三种层的最大装载量,再通过背包算法对层进行组合,得出装箱的最优方案。该算法复杂度低,装载方案简单。     

NH4SCN从ROH-CTMAB-C12H26载金有机相中反萃金

研究了硫氰酸铵（NH4SCN）从混合醇（ROH）－十六烷基三甲基溴化铵（CTMAB）－正十二烷（C12H26）载金有机相中反萃金，考察了平衡时间，PH值，反萃剂浓度，温度等因素对反萃率的影响及有机相的循环使用，绘制了反萃等温曲线，结果表明，NH4SCN对金具有较高反萃率，可顺利实现金的反萃。     

双轴加载条件下疲劳裂纹扩展的研究

在双轴加载条件下对Ⅰ型疲劳裂纹扩展进行了研究。载荷范围从0.08σ_s到0.71σ_3,包括比例加载和非比例加载。基于对Von Mises理论的讨论,提出一个新的力学参数。双轴加载条件下的弹塑性参数P成功地描述了双轴比例加载和非比例加载下的疲劳裂纹扩展。     

加载速率对结构钢力学性能和断裂韧度的影响

在常温下进行了常用建筑结构钢(16Mn和Q235B钢)动态拉伸和动态断裂韧度试验。试验结果表明，材料在动载下无论是屈服强度还是抗拉强度均有一定的提高，塑性有了一定的降低；由于缺口尖端区域温度的升高，常温下动载对于16Mn钢母材和焊缝的断裂韧度是有利的；Q235B钢常温下，焊缝的断裂韧度值较低，且动载对母材的断裂韧度影响较大，和静载相比动载下断裂韧度值降低了4倍有余，可以看出，Q235B钢的抗震性能较差。通过研究发现，对于低韧度水平的材料，研究动载下结构的断裂行为时．材料的强度也应该作为一个考虑因素。     

饮用水中天然有机物的分析与表征方法

天然有机物(NOM)是一类分布广泛、成分复杂的有机混合物,可严重影响饮用水的处理效率,并可能对出水水质产生严重的不利影响。因此,为了改进和优化饮用水的处理过程,在研究和实际应用阶段对NOM进行表征和定量以了解其结构特性和反应性具有重要意义。文中先对NOM的富集方法进行了介绍,接着梳理了不同分离方法的依据及作用,最后总结了各类表征方法的原理及应用,以期有助于对NOM和饮用水处理的深入研究。     

AN EXPERIMENTAL-NUMERICAL METHOD FOR MEASURING CRACK PROPAGATING VELOCITIES UNDER STRESS WAVE LOADING

An experimental-numerical method for measuring dynamic crack propagating velocities under stress wave loading is established in this paper. The experiments of the three-point bend specimen are done on the improved Hopkinson bar. Deflection of loading point, dynamic load and instantaneous crack length are measured, then crack propagating velocities are calculated. Experiments on 40Cr steel show that the results given by this method have a good agreement with that obtained by the resistance fracture gage method. Therefore this method is feasible for measuring crack propagating velocities under high loading rate and will have wide application.     

机动车辆装载问题的一种混合遗传算法实现*

针对货物装载地和运送目的地均已确定情况下的车辆装载问题,给出了基于遗传算法求解的数学模型,并对基本遗传算法的各个算子针对问题的特点提出了改进方法,同时引入启发式策略,形成了一种混合遗传算法.该算法的特点是各个算子都以提高算法收敛速度和解的最优性为目标,同时种群大小是动态变化的,以求在保证群体多样性的同时加快收敛速度.实验结果表明,该算法对求解此类问题是有效的.     

有机发光材料中间体1-羟基芘的合成工艺研究

1-羟基芘是一种重要的有机电致光材料中间体,该中间体能与一些芳烃及其衍生物进一步反应得到不同性质的光电材料,具有广阔的市场前景。为获得1-羟基芘,本文以芘为原料,在二氯甲烷溶液中,在三氯化铝的催化下与乙酰氯反应得到1-乙酰芘;然后与间氯苯过甲酸或过氧硼酸发生bayer-villiger反应,得到1-乙酰氧基芘;接着在甲醇和四氢呋喃混合溶液中水解得到1-羟基芘,该合成路线短,原料易得,适应工业化生产,经1HNMR光谱鉴定,产物与1-羟基芘结构一致。     

Functionalized metal–organic frameworks with strong acidity and hydrophobicity as an efficient catalyst for the production of 5-hydroxymethylfurfural

In the dehydration of fructose to 5-hydroxymethyl furfural(HMF), in situ produced water weakens the acid strength of the catalyst and causes the rehydration of HMF, causing unsatisfactory catalytic activity and selectivity. In this work, a class of benzenesulfonic acid-grafted metal–organic frameworks with strong acidity and hydrophobicity is obtained by the direct sulfonation method using 4-chlorobenzenesulfonic acid as sulfonating agent. The resultant MOFs have a specific surface area of greater than 250 m~2·g~(-1), acid density above 1.0 mmol·g~(-1), and water contact angle up to 129°. The hydrophobic MOF-Ph SO_3 H exhibits both higher catalytic activity and selectivity than MOF-SO_3 H in the HMF synthesis due to its better hydrophobicity and olephilicity. Moreover, the catalyst has a high recycled stability. At last, fructose is completely converted, and 98.0% yield of HMF is obtained under 120 °C in a DMSO solvent system. The successful preparation of the hydrophobic acidic MOF provides a novel hydrophobic catalyst for the synthesis of HMF.