针对语音变换的语音篡改检测

针对使用语音变换技术的语音篡改,提出一种自动检测方法。在分析语音变换基本模型和变换语音失真的基础上,提取语音信号的声道参数以及相关的信号统计量,并通过支持向量机递归特征消除法,选择出对语音变换比较敏感的特征作为分类特征,使用支持向量机进行语音变换检测和变换语音的说话人性别判别。对于一种语音变换软件的实验结果表明,该方法具有较高的检测准确率,其中语音变换检测的平均准确率为94.90%,变换语音的说话人性别判别平均准确率为92.09%。     

煤矿管道瓦斯流量计量技术研究

阐述了煤矿管道瓦斯流量计量技术的发展现状,分析了孔板流量计、涡街流量计、皮托管流量计、旋进漩涡流量计、V锥流量计的优缺点;针对瓦斯流量测量准确度受气体中的杂质和瓦斯体积分数变化影响的问题,提出了解决办法;建议煤矿瓦斯抽放管网中的主管、干管、支管采用V锥流量计,汇流管以及各评价单元采用多点采样的插入式流量计;指出煤矿管道瓦斯流量计量应根据不同的现场状况、工况条件及测量需求选择相应的流量计。     

通用视觉检测设备的专家在线平台设计

针对视觉检测设备在复杂的生产环境下存在图像处理参数设置问题,设计了一套B/S架构的通用的专家在线平台,通过在原有的视觉检测平台上增加一个普通的USB摄像头及相应的应用软件,并通过网络将出现的新问题的图像实时传输给生产厂家或外部专家,由专家通过浏览器设置合理的图像处理参数,平台综合了数据协同、远程培训等功能,达到了远程解决问题的目的。     

Delay‐dependent stability for Markovian genetic regulatory networks with time‐varying delays

This paper is concerned with the problem of stochastic stability analysis for a class of genetic regulatory networks with Markovian jump parameters and time‐varying delays. A delay‐dependent stability criterion is derived by using a novel mode‐dependent Lyapunov functional. The derived stability criterion is expressed in terms of linear matrix inequalities and is less conservative than the existing ones in the literature. A numerical example is provided to demonstrate the effectiveness of the proposed stability criterion. Copyright © 2011 John Wiley and Sons Asia Pte Ltd and Chinese Automatic Control Society     

Feedback predictive control for constrained fuzzy systems with Markovian jumps

In this paper, a feedback model predictive control method is presented to tackle control problems with constrained multivariables for uncertain discrete‐time nonlinear Markovian jump systems. An uncertain Markovian jump fuzzy system (MJFS) is obtained by employing the Takagi‐Sugeno (T‐S) fuzzy model to represent a discrete‐time nonlinear system with norm bounded uncertainties and Markovain jump parameters. To achieve more generality, the transition probabilities of the Markov chain are assumed to be partly unknown and partly accessible. The predictive formulation adopts an on‐line optimization paradigm that utilizes the closed‐loop state feedback controller and is solved using the standard semi‐definite programming (SDP). To reduce the on‐line computational burden, a mode independent control move is calculated at every sampling time based on a stochastic fuzzy Lyapunov function (FLF) and a parallel distributed compensation (PDC) scheme. The robust mean square stability, performance minimization and constraint satisfaction properties are guaranteed under the control move for all admissible uncertainties. A numerical example is given to show the efficiency of the developed approach. Copyright © 2011 John Wiley and Sons Asia Pte Ltd and Chinese Automatic Control Society     

Effect of deposition conditions on the properties and annealing behavior of cold-sprayed copper

The deposition of copper by cold gas dynamic spraying has attracted much interest in recent years due to the capability to deposit low-porosity oxide-free coatings. However, it is generally found that as-deposited copper has a signicantly greater hardness, and potentially lower ductility, than bulk material. In this article, copper was deposited by cold spraying using helium as the driving gas at both 298 and 523 K. Evidence is presented indicating that the material sprayed at the lower temperature exhibits a lower dislocation density throughout the grain structure than the material sprayed at the higher temperature. The low stacking fault energy of copper restricts recovery during annealing, and thus microstructural changes during annealing only proceed once recrystallization begins. The material sprayed at low temperature (with the low dislocation density) exhibited recrystallization at annealing temperatures as low as 373 K with a corresponding reduction in hardness. However, the copper sprayed with helium at 523 K was resistant to annealing at temperatures up to 473 K where the dislocations in the structure prevented recrystallization. However, at higher temperatures, recrystallization did proceed (with corresponding reductions in hardness). The fracture behavior of the copper that was cold sprayed with helium at 523 K, both in the as-sprayed condition and following annealing, was measured and explained in terms of the annealing mechanisms proposed. The original version of this paper was published in the CD ROM Thermal Spray Connects: Explore Its Surfacing Potential, International Thermal Spray Conference, sponsored by DVS, ASM International, and HW International Institute of Welding, Basel, Switzerland, May 2–4, 2005, DVS-Verlag GmbH, Düsseldorf, Germany.     

离心泵性能参数的自动测定和自动控制

通过将计算机技术应用于离心泵性能参数的研究，实现了离心泵性能参数的自动测定和自动控制。     

Determination of the solubility parameter of poly(ethylene oxide) at 25°C by gas-liquid chromatography

The solubility parameter of poly(ethylene oxide) at 25°C has been determined using the method developed by DiPaola-Baranyi and Guillet, by the extrapolation of the values of the interaction parameter χ, at high temperatures, ranging from 70°–90°, 90°–110° and 110°–130°C down to 25°C. The values of the solubility parameter obtained, depending on the temperature ranges employed, are 9.8, 9.9 and 10.1, respectively.     

广义线性模型与非线性模型参数的统计推断

概述了广义线性模型(含半参数广义线性模型)与非线性模型研究的新进展,着重讨论了它们参数估计的统计推断。近年来,广义线性模型与非线性模型的研究发展迅速,有着广泛的应用前景。