自适应Fourier分解思想在再生核W2 1 [a,b]空间的应用

在再生核$W_2^1[a, b]$空间中研究自适应正交贪婪分解算法, 利用能量下降最快的原理自适应性地构造出最佳$n$项逼近函数, 并从理论上证明其收敛性成立。最后, 实验验证了在$W_2^1[a, b]$再生核空间中, 利用正交贪婪原理构造的$n$项数值原函数比用等分结点构造出的最佳$n$项数值原函数收敛效果更优。     

Natural Polysaccharides as Multifunctional Components for One-Step 3D Printing Tough Hydrogels

Natural polysaccharides (NPS) are regarded as biomolecular and structural components for preparing high-performance tough hydrogels. But the one-step fabrication of NPS-containing hydrogels in seconds and the template-free design of complicated high-resolution structures are still significant challenges in this field. To meet these requirements, various NPS-containing tough hydrogels are fabricated and processed into 2D/3D structures via the combination of Ru(bpy)₃²⁺-mediated photochemistry and extrusion 3D printing technique. The whole fabrication process is one-step, completed in tens of seconds under visible light irradiation. It is found that the used NPS plays a key role in achieving the fabrication of high-performance structured tough hydrogels. The high reactivity of functional groups in the used NPS can shorten their gelation times. Long rigid chains of the used NPS, their hierarchical assemblies, and contrasting multinetworks benefit from the efficient dissipation of mechanical energy and enhancement of its operational stability. Strong supramolecular interactions enable hydrogel precursors to have high viscosities, therefore providing good controllability to design high-resolution and complicated tough hydrogel structures via extrusion 3D printing. It is anticipated that this straightforward fabrication strategy and findings will open new horizons for NPS-containing materials.     

Multicomponent Bioluminescence Imaging with Naphthylamino Luciferins

Bioluminescent tools have been used for decades to image processes in complex tissues and preclinical models. However, few distinct probes are available to probe multicellular interactions. We and others are addressing this limitation by engineering new luciferases that can selectively process synthetic luciferin analogues. In this work, we explored naphthylamino luciferins as orthogonal bioluminescent probes. Three analogues were prepared using an optimized synthetic route. The luciferins were found to be robust emitters with native luciferase in vitro and in cellulo. We further screened the analogues against libraries of luciferase mutants to identify unique enzyme-substrate pairs. The new probes can be used in conjunction with existing bioluminescent tools for multi-component imaging.     

基于数值模拟的等效拉延筋设计与优化

拉延筋在汽车覆盖件拉深成形中起着十分重要的作用。利用拉延筋可以在较大范围内调节和控制板料的变形程度和变形分布,抑制破裂、起皱、面畸变等多种冲压质量问题的产生。在很多情况下,拉延筋的设置合理与否将决定覆盖件拉深的成败。文章借助eta/DYNAFORM软件,模拟某轿车B柱加强板在无/有拉延筋的模具上进行拉深的全过程,通过模拟结果分析比较,确定拉延筋的合理布局及数量,最后结合正交实验法,优化拉延筋的结构参数。     

差温无模预成形锻造的有限元模拟研究

利用热力耦合有限元方法 ,对AISI10 4 5钢圆柱体坯料在环形加热源局部加热下的差温无模预成形锻造过程进行了模拟研究。模拟结果表明 ,在坯料中获得和控制大梯度分布的不均匀温度场是实现无模预成形锻造的关键。复杂零件成形必须合理地组合加热源和冷却源 ,以便产生所需的温度梯度场。在快速变形条件下 ,变形过程中的持续加热对金属的流动影响甚微 ,变形前的温度分布基本上决定了金属的流动 ,但在慢速变形条件下 ,变形过程中的持续加热对金属的流动产生一定的影响 ,其影响程度视零件复杂程度而异。从该文研究结果可以预见 ,差温无模锻造可以发展成为一种无模锻造制坯新工艺     

SiC FIBER／ALUMINIUM PREFORM WIRES FABRICATEDBY ULTRASONIC LIQUID INFILTRATION PROCESS

ＳｉＣＦＩＢＥＲ／ＡＬＵＭＩＮＩＵＭＰＲＥＦＯＲＭＷＩＲＥＳＦＡＢＲＩＣＡＴＥＤＢＹＵＬＴＲＡＳＯＮＩＣＬＩＱＵＩＤＩＮＦＩＬＴＲＡＴＩＯＮＰＲＯＣＥＳＳＺｈａｎｇＣｈｅｎｇｅ；ＷａｎｇＬｉｎｇｓｅｎ（ＣｅｎｔｒａｌＳｏｕｔｈＵｎｉｖｅｒｓｉｔｙｏｆ...     

用正交实验设计研究Zr—Nb合金的耐蚀性

利用正交设计实验的方法安排了一组Ｚｒ－Ｎｂ二元合金，考查了两个水平的Ｎｂ含量，淬火温度，时效温度，时间以及合金组织状态对耐蚀性能的影响，５００℃蒸汽腐蚀结果表明，Ｎｂ含量控制在固溶极限范围内Ｚｒ－Ｎｂ二元含金具有较佳的耐蚀性，而当Ｎｂ含量较高时，采用双相区淬火，较高温度长时间时效处理是获得较好耐蚀性的工艺方向。     

Influence of the stress,strain, and temperature on the surface roughness of an AlSl 52100 steel due to an orthogonal cut

In recent years, the finite element method (FEM) has become the main tool for simulating the metal cutting process because research based on trial and error is time consuming and requires high investment. Early studies were done by different investigators. In this research AISI 52100, hardened steel (62 HRC) was selected for an orthogonal machining process as well as metal cutting simulation using the software DEFORM-2D. This software is based on a forging process and has been adapted to an orthogonal machining process. The results of simulated cutting forces were compared with experimental cutting force data to validate the orthogonal cut simulation. Also, the surface roughness was measured, and the influence of the stress, strain, and temperature on the surface roughness was studied.     

SMB色谱分离过程计算机仿真

针对模拟移动床(SMB)综合速率模型，采用有限元法和正交配点法分别对柱向和颗粒径向模型进行离散化，利用MatLab ODE求解器对SMB过程进行数值求解。通过仿真，验证了该方法的可行性。     

醇-水法制备纳米NiO粉末的正交实验研究

纳米NiO粉末具有良好的催化性能、热敏性能及在各种材料中的加工性能,因而被广泛地应用在催化剂、磁性材料、电子元件材料等方面,是一种很有前途的新型功能材料。选用Ni(NO3)2.6H2O为原料,以NH4HCO3为沉淀剂,在醇-水介质中制得了纳米NiO粉末。通过扫描电子显微镜(SEM)对NiO粉末进行了表征。实验过程中,按正交表L8(27)安排了正交实验,通过方差分析确定了醇-水制备纳米NiO粉末的最佳煅烧时间、煅烧温度和醇-水比,并确定了各因素对制备过程的影响程度。