应力交变下微型土压力计的标定及应用

为了研究土压力计在不同应力状态下的敏感系数,利用镶嵌有微型土压力计的模型桩,按照两种方式设计应力交变加载模式进行标定:(a)从初始零应力状态分级加载—卸载至零;(b)从初始零应力状态加载到应力最大值,分级卸载—加载,逐渐到零应力状态。研究结果表明:初始应力为零的加载曲线线性较好,敏感系数可用线性函数进行拟合;初始应力不为零的加载曲线线性也较好,敏感系数也可用线性函数进行拟合;而卸载曲线包含显著的非线性和滞后效应,此时敏感系数就不是一个固定值,可采用指数曲线来进行拟合。将获取的标定系数应用于水平受荷模型桩的桩身应力分析中,在加载过程中3.5D~5.5D深处桩身应力一直变大,且变化幅度最大。研究成果可为水利工程中板桩、抗滑桩等水平受荷桩桩身截面尺寸及配筋设计提供参考。     

塔式旋转混凝土布料机的工况计算及配重调控分析

塔式旋转混凝土布料机是一种可高效输送混凝土的工程机械,被广泛用于混凝土浇筑。施工过程中,为减小其布料端悬臂力矩、保证其塔架的稳定性,需要随时根据其伸缩桁架的伸缩量来调节其配重块的位置。运用有限元ANSYS软件,分析了布料机在极限工况条件下的结构强度和最大合力矩,计算了19种不同工况下力矩、桁架伸缩量及配重调节距离之间的数值关系。在此基础上,利用MATLAB的拟合优化功能得出三者之间的函数关系并绘制三维曲线。研究结果为塔式旋转混凝土布料机的安全运行提供数据支持,同时为其后续的优化设计提供参考。     

Miscibility of oligomeric poly(dimethyl siloxanes) with long-chain unbranched alkanes: 2. Unsymmetrical cloud point curves

Previously obtained cloud point curves for mixtures of oligomeric poly(dimethyl siloxanes) (weight fraction W₁) with oligomeric polyethylenes have been supplemented by the use of samples of higher molecular weight. Initial flat regions at low-medium W₁ as well as a slight shoulder at extremely high W₁ are now considered to be due to crystallization, since the temperatures at which they occur are the melting points of the oligoethylenes. The actual cloud point curves were of an unsymmetrical dome shape, the form of which could not be simulated by using a concentration-independent interaction parameter g in the Flory-Huggins equation. However, spinodals calculated by assuming a quadratic dependence of g on composition were of the same shape as the experimental cloud point curves. The critical compositions calculated on this basis were also close to the experimental ones.     

Packed-microtubes model for flowthrough chromatography of protein

A mathematical model for flowthrough (perfusion) chromatography, namely packed-microtubes (PMT) model, has been proposed for a column packed with biporous (BiP) anion exchanger in which the mesopores and flowthrough pores are created with liquid and solid porogens, respectively. The model is established based on the assumption that the BiP particle is made up of packed microtubes. Bovine serum albumin (BSA) is used as a model protein and three kinds of anion exchangers (i.e., mesoporous, macroporous and BiP resins) are used as adsorbents to determine the model parameters and to evaluate the model. Adsorption equilibrium and finite bath experiments are performed to determine the adsorption isotherms and kinetics parameters. Both the bound amounts of the protein on the surface of the mesopores and macropores are experimentally determined and taken into account in the mathematical model. With all the model parameters determined by independent experiments or calculated from available correlations, model simulations are performed and compared with the experimentally determined breakthrough profiles of the BiP column. It is found that the model predictions agree reasonably well with the experimental data obtained under various conditions and the PMT model fit experimental data better than the modified double linear driving force (LLDF) model proposed by Leitão and Rodriogues (1999. Biochemical Engineering Journal 3, 131) in which the adsorbent particle is considered to be made up of packed microparticles. The results indicate that the PMT model is more reasonable for this kind of BiP adsorbent.     

热压2％（mol）Y_2O_3－ZrO_2陶瓷中t－m相等温转变

用热膨胀分析、Ｘ射线衍射研究了热压２％（ｍｏｌ）Ｙ＿２Ｏ＿３－ＺｒＯ＿２陶瓷中ｔ－ｍ等温转变动力学。结果表明：经过快速冷却而得到的四方相（ｔ）在随后２００～４００℃区间保温时发生了四方相（ｔ）到单斜相（ｍ）的转变。该转变的时间－温度－转变量（ＴＴＴ）曲线呈Ｃ形，鼻子温度为３００℃。高于或低于上述温度范围，未出现ｍ相，可用Ａｖｒａｍｉ方程的一般形式来描述动力学曲线。该相变的形核与长大均是时间的函数，相变激活能为２８．６７ｋＪ／ｍｏｌ。ｔ相的亚稳性不仅与稳定剂分布及晶粒尺寸有关，而且还受冷却速度所控制。     

基于Hilbert曲线和位置自调节法的图像版权保护算法

以小波的相关理论为基础,先把水印图像预置乱处理,对宿主图像直接进行小波包分解,之后将水印的低频部分和中高频部分分别采用Hilbert曲线扫描和位置自调节法嵌入到宿主图像中,嵌入强度可根据图像的内容自适应调节。通过实验观察,新算法在抗压缩和抗剪切性能有所提升,同时隐蔽性和抗噪能力也得到了较大改观,结果充分说明该算法是一种性能较为优良的图像版权保护算法。     

凸轮磨恒线速加工过程曲线优化

为了提高凸轮轴的加工效率和加工精度,开发可用于凸轮轴磨削修整系统的动态优化模块。根据凸轮轴恒线速磨削原理,在Matlab中完成了数学模型的建模,采用三次样条曲线拟合插值法对加工过程曲线进行了优化,从而得到了波动更小的速度曲线并减少了恒线速度磨削所引起的联动轴响应问题。实验表明,该方法很好地实现了在二次磨削中对凸轮轴表面轮廓的修整,提高了凸轮轴的表面质量。     

Edwards曲线快速标量乘算法研究

标量乘法是椭圆曲线密码算法中最核心的运算,其运算速度影响着整个密码体制的实现效率。首先,详细地介绍了Edwards曲线的基本概念。其次,为了提高标量乘法的运算速度,针对椭圆曲线标量乘算法进行了研究,引入了一种可以用来计算连续倍点2◢△mP◣的算法CDA。为了提高CDA的计算效率,提出了将标量◢k◣表示为4-NNAF形式以减少◢k◣的长度,再结合CDA计算标量乘法可以有效地减少运算量。最后根据算法的运算量分析和具体例子得出,减少标量◢k◣长度后的计算效率提高了13%以上。为了进一步加快运算速度,又提出了对CDA中乘法运算和模逆运算采用并行结构来减少标量乘法的运算次数。计算结果表明,并行后的计算效率提高了36%以上。     

MDX1060型X-荧光分析仪的应用与实践

甘肃祁连山水泥股份有限公司从英国牛津仪器公司引进的MDX1060型X-荧光分析仪于2001年11月投入使用，经过2年的调试和维护，掌握了影响其测试稳定性和准确性的各种因素(包括样品制备质量、设备维护技术、工作曲线和测试操作水平等)及其克服这些因素影响的技术措施，从而实现了该公司生产原材料和生科、熟料化学组成CaO，SiO2，Al2O3，Fe2O3，MgO，SO3，K2O和Na2O的快速准确测定，为提高生料配料质量和熟料质量提供了可靠的技术参数。