不平衡电网电压下双馈风力发电系统强励控制

针对电网电压不平衡造成的双馈风力发电机(DFIG)定子有功和无功功率振荡、电磁转矩脉动、定、转子电流不平衡等问题,提出了一种双馈风力发电系统转子侧变换器强励控制方案。推导了不平衡电网电压下DFIG定子有功、无功功率的二次谐波分量在同步旋转坐标系中的表达式,并以此为依据设计了电压强励补偿环。分析了有功、无功功率,电磁转矩及定、转子电流二次谐波分量之间的关系,采用单一强励补偿控制器对不同控制目标进行切换强励控制。对1.5MWDFIG系统的控制特性研究验证了所提控制策略的可行性和优越性。     

单极板微位移电容传感器结构设计与优化

根据单极板微位移电容传感器结构优化设计的问题,提出了一种基于纵横推进法的电磁场仿真参数化建模方法。在建立合理的单极板电容传感器电磁仿真参数模型基础上,首先通过仿真实验选择保护环和绝缘层缺口的最优值。然后依据仿真得到的最优值,选择结构与最优值接近的电容传感器产品对比,取得了较好的研究结果,电容仿真值与实际测量值误差小于0.3%。最后对电容传感器极板倾斜对测量结果的影响进行了研究,极板倾斜2°时测量误差为1.6%。电容传感器结构优化结果满足实际工程要求。     

不同频率激励信号下土壤水分传感器性能试验

激励信号频率是影响高频电容式土壤水分传感器性能的重要因素。利用去离子水和2—异丙氧基乙醇(2—isoproxyethanol)或二氧六环(dioxane)2种溶液混合,配制了一系列等效土壤体积含水率为0.9%~51.8%的待测介电溶液来替代土样。从与土壤含水率的函数关系、温度变异性2个方面,分别对激励信号频率为40,50,60,70,80,90,100 MHz的7种土壤水分传感器进行了性能测试与分析。结果表明:7种频率的传感器的输出电压均与土壤体积含水率呈线性负相关,其相关系数R2均大于0.94;激励信号频率不影响传感器输出电压的温度变异性,温差是影响温度变异性的主要因素,其最大变异率均小于4%。试验结果可为设计高频电容式土壤水分传感器时选择激励信号频率提供依据。     

二维参数化图形技术研究进展

近几年来，参数化图形技术得到了不断的发展。目前已有多种参数化图形方法及系统。这些参数化图形方法可分为３种，即变分几何法、几何推理法和过程法。主要介绍这３种方法的研究进展。     

A parametric frequency response method for non-linear time-varying systems

A new parametric frequency response algorithm is introduced to investigate linear and non-linear dynamic systems with time-varying parameters. In the new algorithm the time-varying parameters are regarded as additional inputs of the systems and the non-linear generalised frequency response functions for multi-input-single-output systems are then employed to obtain Zadeh's system functions from a differential equation representation. The parametric frequency response method reveals how the time-varying parameters affect the behaviour of the systems through a time-varying term. The new method can be applied to both linear and non-linear time-varying systems.     

Chaos in parametric resonance flow at water-mercury interface

In the electrochemical system with liquid-liquid interface, intense local convections by the resonance with potential pulses take place. Therefore, with laser beam scattering, temporal movement of the water-mercury interface was observed. As a result, the scattering efficiency showed non-linear oscillation.

Such non-linear response could be controlled by potential pulse height. As the potential height was increased, new scattering peaks in the oscillation emerged, which was expected of a kind of bifurcation phenomenon. From these results, phase portrait, Poincarè section, correlation dimension of the strange attractor and the largest Lyapunov exponent of the trajectories were obtained. Consequently, it was concluded that all the parameters indicate chaotic behavior of the resonance flow.     

Non‐Parametric Identification Method of Volterra Kernels for Nonlinear Systems Excited by Multitone Signal

To solve the problem of Volterra frequency‐domain kernels (VFKs) of nonlinear systems, which can be difficult to identify, we propose a novel non‐parametric identification method based on multitone excitation. First, we have studied the output properties of VFKs of nonlinear systems excited by the multitone signal, and derived a formula for identifying VFKs. Second, to improve the efficiency of the non‐parametric identification method, we suggest an increase in the number of tones for multitone excitation to simultaneously identify multi‐point VFKs with one excitation. We also propose an algorithm for searching the frequency base of multitone excitation. Finally, we use the interpolation method to separate every order output of VFK and extract its output frequency components, then use the derived formula to calculate the VFKs. The theoretical analysis and simulation results indicate that the non‐parametric method has a high precision and convenience of operation, improving the conventional methods, which have the defects of being unable to precisely identify VFKs and identification results are limited to three‐order VFK.     

一种32位浮点型处理器的励磁控制器设计

针对同步发电机励磁控制系统在控制精度和控制稳定性方面存在的不足,通过对国内外励磁控制系统发展状况的分析,提出了一种基于32位浮点型处理器的数字式励磁控制系统.该系统通过将先进的交流采样算法和DSP的优异性能相结合,实现了励磁控制器的深度数字化;通过对同步发电机系统关键模拟量的采集与计算,得出适用于当前工况下触发脉冲角度α.试验验证了该设计能很好地解决发电机励磁控制系统中的稳定性问题.     

基于近似弧长参数化的机器人轨迹规划

主要研究了采用近似弧长参数化的插值方法进行关节式工业机器人的轨迹规划.运用近似弧长参数化的插值方法将机器人末端轨迹参数曲线离散为等弧长的插值点序列,通过机器人逆向运动学求解各关节的位移点序列,采用极限的方法进行各关节速度和加速度规划.这种轨迹规划方法可以避免关节空间的插值计算和雅克比矩阵的计算.在 matlab7.8平台上,对近似弧长参数化的插值方法、轨迹规划及可行性验证进行了实例仿真,仿真结果表明该轨迹规划方法是可行的.     

参数线性规划问题的新型光滑精确罚函数神经网络

针对不等式约束条件下,目标函数和约束条件中含有参数的线性规划问题,提出一种基于新型光滑精确罚函数的神经网络计算方法．引入误差函数构造单位阶跃函数的近似函数,给出一种更加精确地逼近于Ll精确罚函数的光滑罚函数,讨论了其基本性质;利用所提光滑精确罚函数建立了求解参数线性规划问题的神经网络模型,证明了该网络模型的稳定性和收敛性,并给出了详细的算法步骤．数值仿真验证了所提方法具有罚因子取值小、结构简单、计算精度高等优点．