The creation of the 3107 cm hydrogen absorption peak in synthetic diamond single crystals

The 3107 cm⁻¹ hydrogen related local mode was produced in HPHT grown diamonds after annealing at temperatures above 2100°C. A correlation was found between the intensity of the peak and the concentration of nitrogen at different locations of the same specimen. The peak position did not shift in ¹⁵N doped samples.     

An Improved Procedure for Determining the Work of Adhesion for Polymer-Solid Contact

Force-balance experiments in conjunction with the Johnson-Kendall-Roberts (JKR) theory have been used to determine the work of adhesion between solid systems. It has been shown that deficiencies in understanding the deformation behavior can lead to erroneous results. A modified procedure for determining the work of adhesion by force-balance experiments and JKR theory using normal displacement behavior has been introduced to address these deficiencies. This procedure involves improved experiental and data analysis protocols and has been applied to give more precise work of adhesion values for PDMS poly(dimethylsiloxane)-PDMS, PDMS-F(fluorinated silicon) and PDMS-Si (silicon) systems. The work of adhesion determinations are consistently less than those estimated by contact angle measurements.     

滑坡面位移特征及其应用

论述了滑坡坡面位移特征，提出了根据坡面位移矢量确定滑坡滑动面、预报滑坡发生时间的原理和方法。     

"大肚子"环空液体流动规律的实验研究

针对现场固井在"大肚子"环空段封固质量较差的情况,本文研制了含有"大肚子"环空段的注水泥(液体)流动模拟实验装置。利用该装置,研究井径扩大率、流量、液体流变性能等对"大肚子"环空处的流速场的影响规律。得到了不同情况下(井径扩大率、流量、液体流变性能等变化)"大肚子"环空段不同位置径向截面的流速曲线变化情况,为研究"大肚子"环空段的顶替机理提供了一定的数据资料。     

HHT算法在压电陶瓷驱动器的微纳米位移传感器中的应用

针对信号虽然经过了模拟滤波,采集到的信号经过数据采集系统后不可避免的含有随机噪声,噪声限制了传感器的分辨率和系统的动态范围。提出利用HHT算法的经验模态分解对用于压电陶瓷的微纳米传感器采集到的数字信号进行数字滤波,将采集到的微弱信号进行进一步处理,以提高微纳米传感器在稳态输出时信号的信噪比从而提高传感器的性能。采用两种方法进行处理。其中一种方法是滤掉经过模态分解后信号中的最高频噪声,另一种方法是滤掉经过模态分解后信号中的前两阶噪声。最后对比实验结果证实了此算法的有效性,它能够改善传感器的线性度。     

纳米材料在提高采收率中的研究进展?

近年来，纳米材料因其有吸引力的物化特性已在生物医药、电子储能、保护涂层等领域发挥重要作用。随着石油资源的需求不断增加和开采难度提高，石油勘探和提高石油采收率技术需要不断创新，以满足未来对碳氢燃料的需求。将功能化的纳米材料与提高采收率技术结合，可以改善驱替剂的流变性能，改变储层岩石的润湿性、降低油水界面张力、提高原油的流动性等，进一步提高原油采收率，为油田的有效、可持续开发提供新的技术手段。本文首先综述了当前在提高采收率领域中的应用较多的几类纳米材料；之后，对纳米材料在提高采收率中的作用机理做了总结；最后，讨论了纳米材料在提高采收率技术中存在的问题，并对其发展趋势进行了展望。     

高陡边坡的监测与稳定性分析

从现场监测仪器获取的位移、应力方面的原始数据入手,绘制出位移、应力随时间变化的曲线图,并运用回归拟合分析方法,在综合分析开挖过程中各种影响因素以及锚固工具对边坡锚固效果的基础上,掌握了边坡的变形趋势及稳定状况。可为预测、预报及整治工程地质灾害等提供可靠的资料和科学的依据,为工程的安全进行提供理论保障。     

基于自记忆原理的深基坑位移预测方法

传统灰色GM(1,1)预测模型对非负递增时间序列有较好的预测精度,但对波动幅度较大的时间序列预测精度较低。为了提高预测精度,本文在趋势曲线模型和自记忆理论的基础上,建立趋势曲线-自记忆组合预测模型,将该模型应用于深基坑位移预测中,并与灰色GM(1,1)预测模型和趋势曲线预测模型比较,该模型具有较高的预测精度。     

LED激发叶绿素荧光探测仪的设计研究

对蓝光激发叶绿素的荧光光谱进行了分析,讨论了叶绿素荧光光谱的来源,采用调制式470nm绿光LED激发叶绿素,制成叶绿素荧光光谱仪,线性范围0—100μg／L,检出限0．1μg／L,该方法快速、灵敏、有很好的特异性．     

Effect of variation in gas distribution on explosion propagation characteristics in coal mines

In order to investigate the effect of variation in the distribution of gas on explosion propagation characteristics in coal mines, experiments were carried out in two different channels with variation in gas concentration and geometry. Flame and pressure transducers were used to track the explosion front velocity. The flame speed (Sf) showed a slight downward trend while the methane concentration varied from 10% to 3% in the experimental channel. The peak overpressure (Pmax) dropped dramatically when com-pared with normal conditions. As well, the values of Pmax and Sf decreased when the methane concentration dropped from 8% to 6%. The flame speed in the channel, connected to a cylinder with a length varying from 0.5 to 2 m, was greater than that in the normal channel. The peak overpressure was also higher than that under normal conditions because of a higher flame speed and stronger pressure piling up. The values of Pmax and Sf increased with an increase in cylinder length. The research results indicate that damage caused by explosions can be reduced by decreasing the gas concentration, which should be immediately detected in roadways with large cross-sections because of the possibility of greater destruction caused by more serious explosions.