Characterization of Chemical Densified Coating as Tritium Permeation Barrier

In a fusion blanket design, ceramic coating on structural materials has been considered to be used as a tritium permeation barrier. The Chemical Densified Coating (CDC) method has some advantage compared with another coating method. This method is capable to form densified coating on either the outer or the inner surface of a tube or a container. This process temperature is low (450°C). The fabrication technique of Cr₂O₃-SiO₂ coating had been developed using CDC method. However, Cr₂O₃-SiO₂ coating had open pores in the coating. For filling open pores, the densification treatment by CrPO₄ was examined. In this study, the verification of open pores, the thermal shock resistivity, the adhesion strength and the deuterium permeability were evaluated and compared with Cr₂O₃-SiO₂ (Type 1) coating and Cr₂O₃-SiO₂ including CrPO₄ (Type 2) coating. From these results, it was confirmed that Type 2 coating had a good adhesion property, and permeation reduction factor of SS316 with Cr₂O₃-SiO₂ including CrPO₄ coating reached about 1,000 at 600°C.     

Permeation of indomethacin from semisolid preparations through various semipermeable membranes

Objective: The aim of this study was to evaluate and compare the permeation of model drug indomethacin (IND) from various types of gels through several semipermeable membranes.

Methods: Permeation of IND from gels based on carbomer (CA), hydroxyethylcellulose (HEC), and polyacrylamid/laureth-7/isoparaffin was performed via diffusion cell method through membranes: shed snake skin, full thickness chicken skin, mucosa of pork small intestine, and cellophane.

Results: The least permeation of IND was observed in the case of shed snake skin and full thickness chicken skin. It did not exceed 5.4% of original amount in the preparation after 3?h of measurement regardless the type of gel. In the case of mucosa of pork small intestine and cellophane the permeated amount of IND ranged from 9.4 to 55.4% depending on the type of gelling agent used. There was also quite a significant influence of a gelling agent on the permeation of IND observed. The permeation of IND was highest from CA gel, where it ranged from 0.6 to 52.2% of original amount in the preparation depending on the type of membrane used. Gelling agent inhibiting the permeation the most was HEC, where the permeated amount of IND did not exceed 12.3% regardless the type of membrane used.

Conclusions: In general the permeated amount of IND through biological membranes containing stratum corneum represented just a small part of the amount in original preparation. Gelling agent has significant effect on the extent and rate of permeation.     

Magnetocaloric effect in Gd(1−y)DyyAl2

In this work we calculate the magnetic properties and the magnetocaloric effect in Gd_1−yDy_yAl₂ (y = 0, 0.25, 0.5, 0.75 and 1). The model Hamiltonian includes contributions from the Zeeman effect, the crystalline electrical field anisotropy and the exchange interactions among Gd–Gd, Gd–Dy and Dy–Dy ions. To obtain a composite with ΔS_T as constant as possible in the temperature range from T = 60 K to 170 K, the appropriate concentrations of the five compounds investigated were calculated using the Smaili and Chahine method. The magnetization and ΔS_T dependences on temperature in the composite were simulated and compared with the partial contributions of the single magnetic component materials. Also, the magnetic field dependence on magnetization was investigated in Gd_0.25Dy_0.75Al₂, where the discontinuous spin reorientation transitions were predicted for magnetic fields lower than 2 T, applied along <110> direction.     

Oxygen Permeation and Stability of Ce0.8Gd0.2O2-δ-PrBaCo2-xFexO5＋δ Dual-phase Composite Membranes

Dual-phase membranes of 60 wt% Ce0.8Gd0.2O2-δ-40 wt% Pr Ba Co2exFexO3 d（0 x 2） were prepared by a combined citrate and ethylene diamine tetraacetic acid（EDTA） complexing method. X-ray diffraction（XRD）results revealed the good chemical compatibility between ion-conducting phase CGO and electron-conducting phases PBC2 xFxO after sintering in air. The Fe ionic dopant had a significant effect on the phase structure stability and oxygen permeability under CO2 atmosphere, which was confirmed by XRD, thermogravimetrye differential scanning calorimetry（TGeD SC）, scanning electron microscopy（SEM） and oxygen permeation experiments. CGOeP BC0.5F1.5O dual-phase membrane demonstrated a stable oxygen permeation flux of2.71x10-7mol cm 2s 1with 50 mol% He/CO2 as the sweep gas at 925 C, and this value was much higher than that of perovskite-type membranes. The rate-limiting step in the oxygen permeation process changed from the bulk diffusion to the surface oxygen exchange when the CGOeP BC0.5F1.5O membrane thickness decreased to 0.8 mm or less. Due to the high oxygen permeation fluxes and the excellent structural stability under CO2 atmosphere, the CGOeP BC0.5F1.5O membrane is a great potential candidate material for separating oxygen from air in the oxy-fuel combustion techniques.     

Constitutive model and failure criterion for orthotropic ceramic matrix composites under macroscopic plane stress

To predict the nonlinear stress-strain behavior and the rupture strength of orthotropic ceramic matrix composites (CMCs) under macroscopic plane stress, a concise damage-based mechanical theory including a new constitutive model and two kinds of failure criteria was developed in the framework of continuum damage mechanics (CDM). The damage constitutive model was established using strain partitioning and damage decoupling methods. Meanwhile, the failure criteria were formulated in terms of damage energy release rate (DERR) in order to correlate the failure property of CMCs with damage driving forces, and the maximum DERR criterion and the interactive DERR criterion were suggested simultaneously. For the sake of model evaluation, the theory was applied to a typical CMC with damageable and nonlinear behavior, that is, 2D-C/SiC. The damage evolution law, strain response and rupture strength under incremental cyclic tension along both on-axis and off-axis directions were completely investigated. Comparison between theoretical predictions and experimental data illustrates that the newly developed mechanical theory is potential to give reasonable and accurate results of both stress-strain response and failure property for orthotropic CMCs.     

Effect of the particle size ratio on macro- and mesoscopic shear characteristics of the geogrid-reinforced rubber and sand mixture interface

As a new type of material for civil engineering projects, the rubber and sand mixture is widely used in roadbed fillers, offering environmental benefits over traditional tyre disposal methods. This study uses a large-scale direct shear apparatus to examine the interface shear properties of the geogrid-reinforced rubber and sand mixture, considering different particle size ratios (r), rubber contents, and normal stresses. Based on indoor tests, direct shear models of the mixture with different values of r are established in PFC^3D, revealing the meso-mechanical mechanism of the mixture in the direct shear process. The results show that when r is greater than 1, incorporating a certain amount of rubber particles can increase the shear strength of the mixture. The r values of 15.78, 7.63, and 3.98 correspond to an optimal rubber content of 30%, 10%, and 20%, respectively. When r is less than 1, mixing rubber particles can only reduce the shear strength of the mixture. When the rubber content is low, the smaller the value of r, the greater is the thickness of the shear band. Furthermore, the normal and tangential contact forces are greater. The fabric anisotropy evolution law of the mixture is consistent with the change in the contact force distribution.     

Iron oxide-Palladium core-shell nanospheres for ferromagnetic resonance-based hydrogen gas sensing

Interfaces of ferromagnetic transition metals such as Iron, Cobalt, and Nickel with non-magnetic palladium are of interest due to their unique magnetic and spintronic properties. These interfaces enable ferromagnetic resonance (FMR) based sensing of hydrogen gas. In the present work, we synthesized Fe₃O₄–Pd core-shell nanospheres via a one-pot synthesis method using the thermal decomposition of Fe³⁺ acetylacetonate in the presence of a reducing agent to produce the Fe₃O₄ core, followed by the reduction of a Pd²⁺ precursor to form the pure Pd shell. We found that our in-situ synthesized core-shell nanostructure is magnetically active and shows excellent H₂ gas sensing properties. The effect of reversible hydrogen gas absorption on the magnetism of Fe₃O₄–Pd core-shell nanospheres was investigated. The hydrogen-induced ferromagnetic-resonance (FMR) peak shift amounted to 30% of the peak linewidth for the virgin state of the sample. In addition, in the presence of hydrogen gas, we observed a fully reversible decrease in the FMR peak linewidth by about two times. This was accompanied by a nearly doubling of the FMR peak height. Response and recovery times of about 2 and 50 s, respectively, were extracted from the measurements. All the data was collected using a mix of just 3% hydrogen in a nitrogen carrier gas.     

Gas transfer through wine closures: A critical review

BackgroundGas transfer, and especially oxygen, through wine closures has been studied since the 90's. It started with the problem of premature oxidation in wine. To that purpose, different techniques, issued from food packaging and wine analysis, have been developed to measure gas permeation through wine stoppers.Scope and approachThe objectives of this review is, first, to briefly remind the basic knowledge of gas transfer through materials and applied to wine stoppers. Then, after a short survey about the techniques of measurement, a compilation of all currently available permeation data has been done using the international system of units (when conversion was possible). This finally allowed to establish a critical appraisal between the different methods and closures.Key findings and conclusionsAlthough relying on different principles, with different accuracy (and respective pros and cons), all methods are well suited to investigate gas transfer through closures. The manometric method appears as the most versatile one, allowing to study all gases with various sample geometry. Whatever the method used, it appears that the technical stoppers are the lowest permeable ones to gas transfer, followed by screwcaps, natural corks and synthetic stoppers. Finally, it is worthy to note that the diffusion coefficient, as an intrinsic parameter, is the most relevant parameter to characterize the gas barrier properties of wine stoppers.     

Post-forming monotonic and cyclic behavior in a HSLA steel sheet after large deformations by in-plane compression

The effects of large prestrains (18–40%), produced by in-plane compression, on the asymmetry and the anisotropy of the stress response and on the fatigue life are investigated under fully reversed axial strain for a 345 MPa yield strength V–N high strength low alloy steel sheet. After prestraining, the hysteresis loops are asymmetric and the stress response is anisotropic, i.e., the response differs in directions parallel and perpendicular to that of the compressive prestrain. To understand the cyclic flow stress asymmetry, monotonic tension and compression tests were conducted in these two directions after prestraining. It is shown that the loop asymmetry is related to the Bauschinger effect after prestraining. Two cyclic stress strain curves, one corresponding to the tension side of the hysteresis loops and the other to the compression side, are defined to accurately describe the post-prestraining behavior. The amount of strengthening gained by prestraining is partially retained after cycling. Prestraining increases the fatigue life at low strain amplitudes but decreases it at high strain amplitudes.