亚砜基改性纤维素膜的SO2气体渗透性能研究

分别使用二甲基亚砜浸泡的物理方法及苯基乙烯基亚砜加成的化学方法对纤维素膜进行了改性,并对改性膜的性能进行了测试.结果表明改性后纤维素膜仍为致密结构,SO2的渗透性能及其对N2的分离性能明显提高,其中改性液中添加二甲基亚砜的均相化学加成反应所得的改性膜具有较好的SO2渗透稳定性.     

Sorption and permeation of solutions of chloride salts, water and methanol in a Nafion membrane

The sorption of water–methanol mixtures containing a dissolved chloride salt in a Nafion 117 membrane, and their transport through the membrane under the driving force of a pressure gradient, have been studied. Both type of experiments was performed by using five different salts: lithium chloride, sodium chloride, cesium chloride, magnesium chloride and calcium chloride. It was observed that both the permeation flow through the membrane and the membrane swelling increase significantly with the methanol content of the solutions. These facts are attributed to the increase in wet membrane porosity, which brings about the increase of the mobility of solvents in the membrane, besides the increase of the mobility of the polymer pendant chains. In contrast, the influence of the type of electrolyte on the membrane porosity and permeability is not very important, with the exception of the CsCl solutions, which is probably due to the small hydration ability of the Cs⁺ ion.     

磷钨杂多酸催化乙醇和乙酸酯化反应的研究

以多孔钛片为支撑体,制备了磷钨杂多化合物薄膜化催化剂。在膜催化器上,考察了薄膜化催化剂对乙醇和乙酸合成乙酸乙酯的催化性能。结果表明,薄膜化催化剂显著提高了催化活性;当n(乙醇)∶n(乙酸)=1.5∶1,原料流量2.55mL/h;在反应温度为110℃时,乙酸乙酯产率可达97%,且薄膜催化剂的处理很方便,不污染环境。     

膜分离活性污泥法在辣根废水处理中的应用

本文以处理辣根废水为例，介绍一种新的水处理方法-膜分离活性污泥法，并阐述了膜分离活性污泥法如何解决污泥膨胀问题以及传统活性污泥法所不具有的特性。     

Molecular dynamics studies of a model polymer-catalyst-carbon interface

Classical molecular dynamics simulations are performed to obtain insights into structural and dynamical behavior of water and O₂ transport through a model polymer membrane, and at the interface of such hydrated polymer with graphite-supported nanocatalyst platinum particles. Water clustering is observed near the membrane hydrophilic sites constituted by sulfonic groups, which due to their affinity with platinum, are located near the metallic surface. It is found that the diffusion of water through the model hydrated polymer membrane depends strongly on the level of membrane hydration due to contribution from various mechanisms whose relative weights change with the degree of hydration. Possible scenarios for O₂ diffusion are also analyzed.     

甲酸甲酯合成与转化的催化技术

本文评述了甲酸甲酯(MF)合成与转化的催化技术,展示了从MF出发发展C_1化学的可能途径,在MF的合成方面详细地分析了从甲醇出发的羰化法、脱氢法和氧化法催化技术,简介了我们的有关研究工作。     

SEPARATION AND ENRICHMENT OF WEAK ORGANIC ACIDS OR BASES BY IMMOBILIZED LIQUID MEMBRANES

A new and effective liquid membrane process to achieve both separation and enrichment simultaneously of weak organic acids or bases was developed. The process utilizes effectively the difference in the apparent partition coefficient of the constituent species between the aqueous and organic phases, and uses the change of the apparent partition coefficients with the hydrogen ion concentration of the aqueous phase. For such a fundamental model apparatus as a diaphragm diffusion cell being operated batch wise, the effects of pK value of solutes, permeability of solutes through the membrane, volume ratio of liquids in two aqueous phases, and pH value of aqueous phase on enrichment factor and selectivity for the solute to be concentrated were discussed analytically. Separation and enrichment were demonstrated using aqueous mixed solutions of fumaric acid and L-malic acid. The results were in good agreement with the theoretical predictions.     

CoX催化苯乙烯氧化-膜分离耦合连续反应工艺的研究

将细小的CoX催化苯乙烯氧化悬浮体系与无机膜分离耦合,实现了反应的连续操作,考察了温度、催化剂用量、溶剂量和搅拌速度对反应结果和膜通量的影响。结果表明膜分离过程不会对反应活性造成影响,操作过程中各因素对膜通量的影响归因于此条件下催化剂对膜孔的堵塞及其在膜表面的沉积程度,而超声是一个很好恢复膜通量的手段。在m(CoX)∶m(苯乙烯)=0.16、V(溶剂)∶V(苯乙烯)=3、反应温度100℃、停留时间6 h、搅拌速度800 r/min,跨膜压差0.03 MPa的条件下,苯乙烯的转化率达54.3%,环氧苯乙烷的选择性达到51.4%,苯甲醛选择性达到31.0%,膜通量为28.9 L/(m2.h)。     

板式升膜蒸发器在离子膜烧碱中的应用

介绍了升膜蒸发的原理及影响传热量的因素。重点介绍了板式升膜蒸发器在离子膜烧碱蒸发系统中的应用情况及蒸发装置的特点。     

Bulk and Surface Properties of a VPO Catalyst Used in an Electrochemical Membrane Reactor: Conductivity-, XRD-, TPO- and XPS-study

In the first part of this work, the electrical conductivity of vanadium phosphorous oxide (VPO) catalyst was investigated by means of the 2-probe EIS method. The VPO showed an extremely low conductivity at low oxygen partial pressure, which is the prevailing condition in the anodic compartment in an electrochemical membrane reactor (EMR). In the second part of this study, fresh as well as VPO catalyst already used in an EMR were characterised with XRD, XPS and temperature programmed oxidation (TPO). The XRD measurements revealed an unchanged bulk phase structure after operation in the EMR. Significant differences in the average oxidation states of vanadium in the catalyst layer in the EMR were determined via XPS, where the catalyst surface facing the electrolyte membrane was more oxidised than the surface facing the anodic gas compartment. The lowered uptake and release of oxygen was observed in TPO experiments for the catalyst used in the EMR.