哈尔滨炼油厂MTBE装置试生产

介绍了哈尔滨炼油厂ＭＴＢＥ装置的工艺路线、新技术的应用及特点；催化剂的装填及应用情况；总结了生产过程中遇到的一系列问题及解决办法；探索了平稳生产的新徐径，以保证装置安全、平稳、长周期运行；同时对反应器操作温度、催化蒸馏塔操作压力、原料中醇烯比等因素对异丁烯转化率及ＭＴＢＥ产品的影响做了简单的总结。     

材料研究中系列试样的单标样法 X 射线定量分析

本文提出了用一个标样进行系列试样 X 射线定量相分析的方法.它克服了一般 X 射线定量方法需要混合研磨和手续烦复的缺点以及无标样 X 射线定量方法存在病态方程不易解决的问题.该方法对常规 X 射线定量分析具有普遍的实用性.     

油气两相压降数值试井模型及其典型曲线的规律

提出油气两相流动压降试井数字模型的数值解法，用此解法对均质油藏中油气两相流动试井的规律进行了研究，根据实例计算结果，分析油气两相流下典型压降试井曲线的特征，以及油、气的初始饱和度分布，两相黏度比，饱和度梯度、相对渗透率关系对试井曲线的影响和相应的作用机理，首次发现气体的存在会使油气两相试井的压力导数曲线表现出类似于单相流双重介质试井的压力导数曲线的“下凹”特征。     

自旋为j的粒子在旋转磁砀中的几何相位

用相干态的方法得到旋转磁场中自旋为j的粒子的态矢量的严格表达式，由此可计算相干态和叠加相干态的Abaronov－Anandan相位（AA相让）．并具有清楚的物理图象．     

Effect of Bi and Sr concentrations on the formation of the 2223 phase in Bi-Pb-Sb-Sr-Ca-Cu-O materials, obtained under different conditions of thermal treatment

The superconducting properties and the phase and chemical composition of Bi _x Pb_0.3Sb_0.1Sr _y Ca₂Cu₃O_z (x=1.5, 1.6, and 1.7;y=1.9, 2.0, and 2.1) materials synthesized by one-step and multistep thermal treatments have been investigated. The multistep annealing between 825–875°C promotes the 2223 phase. The change of Bi concentration has little effect on the 2223 phase formation, regardless of the kind of thermal treatment used, but increasing the Sr concentration (y> 2) strongly inhibits this phase. It has also been established that the loss of Pb after synthesis depends on the initial Bi concentration. The loss of Pb decreases when the initial Bi content is lower.     

红外隐身技术的现状与发展

综述了红外隐身技术的现状，指明了存在的问题以及发展的方向。     

Recrystallization/precipitation behaviour in microalloyed steels

Microalloyed high-strength low-alloy (HSLA) steels contain additions of Nb, V, Ti, or in combination, in amounts of 0.01 to 0.1 weight percent to improve mechanical properties, which are strongly dependent on the thermomechanical interaction taking place in the course of rolling mill processes. The recrystallizatian of hat-twisted austenite has been investigated in a cylindrical specimen (f 6×50 mm) machined from hat rolled plates of 0,052 wt % Niobium microalloyed steel. Continuous and interrupted torsion test were carried out in the temperature range 1123 K to 1173 K after a solution treatment of 1.5 minutes at 1423 K and torque-twist data were analysed. The various methods were discussed for obtaining results from torsion tests. The effect of precipitation kinetics was appreciated by way of connection t_p/t_p(red), where t_p is the experimental measured time for the peak stress and t_p(red) is the newly defined reduced time. The softening ratio X and time t_0.05R for start of static recrystallization were established.

The correlation between precipitation and recrystallization is presented as a graphs for chosen requirements (temperature of austenitization, carbon and niobium content and strain rate). If temperature goes below 850°C, the restoration processes are hardly suppressed, both are limited by diffusion and Nb(CN) precipitation, which are extended dynamically in the range of strains rates 10⁻² to 1 s⁻¹.

In the present paper, an attempt is made to derive the PRTT diagram and to define all mathematical equations for describing recrystallization times t_0.05R, t_0.5R, t_0.95R and t_0.05P for the start of precipitation. In real metal forming processes such as the hot rolling of plates or strips the knowledge of these parameters and results is extremely important for the the correct microstructure and sheet quality to be obtained.     

相转移催化合成芳基烷基醚

报道了以四丁基溴化铵为相转移催化剂，简便地合成了１０个芳基烷基醚，反应几乎是定量地快速进行。     

Prediction of liquid–liquid phase diagrams of aqueous salt+PEG systems using a thermodynamic model

In this study a thermodynamic model for the phase behavior of aqueous salt+polymer solutions is developed. The model is based on the solution theory of Hill, which included scaling laws for the polymer molecular mass dependence and Pitzer–Debye–Hückel theory. This model was tested for systems composed of two different molecular mass of polyethylene glycols (PEG) and five different inorganic salts. All the model parameters were determined from independent measurements. The agreement between the experimental and predicted phase diagrams by this model is good.