Structure modification of rapidly solidified Al-11 wt% Si alloy by the addition of 2 wt% Fe

An investigation of the structure formation of as-cast Al-11 wt% Si (AlSi11) and Al-11 wt% Si-2 wt% Fe (AlSi11Fe2) rapidly solidified (RS) ribbons is performed. Ribbon samples are examined in detail using Auger electron spectroscopy (AES) and transmission electron microscopy (TEM). A nanoscale thickness layer of Si-precipitations, at both Al-grains boundary and oxide/Al-matrix interface, is found to be characteristic for “pure” AlSi11 ribbons. For Fe-doped ribbons, this layer comprises Fe-containing phase also, which appears to possess amorphous nature and is situated between the Si-grains and Al-matrix. A possible mechanism of altering the thermally activated volume diffusion of elements, due to the effect of Fe on the structure modification, is speculated based on the obtained results.     

Imaging the domain pattern of the canted magnetization state in Co/Pt multilayer films

The exact magnetization pattern of magnetic films close to a spin-reorientation transition is difficult to analyze due to the intrinsically three-dimensional (3d) variation of the orientation of the local magnetization. We present a technique how this can be performed, based on the analysis of high quality 2d polarization maps from a single scanning electron microscope with polarization analysis (SEMPA) measurement with tilted sample. The key tool is the statistical distribution of all occurring polarization doublets, visualized in a 2d histogram plot. From the shape of the distribution the type of transition—canted-phase, or coexisting phases—can be inferred. For the canted-phase state, the canting angle can be accurately determined from geometrical considerations. With help of the histogram the image data can be analyzed and the three components of the magnetization can be calculated for most points of the image. For a Co/Pt multilayer film we found a cone state. The magnetization forms a complex pattern consisting of out-of-plane domains while the in-plane magnetization shows a maze pattern.     

A general formula for the evaluation of thermodynamic and aerodynamic losses in nucleating steam flow

Near saturation steam undergoing rapid expansion, with homogeneous nucleation of water droplets, is numerically studied in a series of converging/diverging nozzles with and without shocks. To understand loss mechanisms in such flows a numerical model is presented to calculate thermodynamic losses, which is further used to quantify associated total aerodynamic losses. For the converging/diverging nozzle configuration, the model shows that the overall thermodynamic loss is only mildly influenced by increasing shock strength, while the aerodynamic losses follow that of the single phase flow, and are of the same magnitude as the thermodynamic loss only in the case of very weak shocks. The thermodynamic losses can be attributed to two influences, the homogeneous nucleation event, and the post-shock thermal oscillations in the two-phase system. The calculations rely on a new two-phase CFD model, previously reported, for non-equilibrium phase change with droplet nucleation applicable to general 3D flow configurations.     

利用田口技术论证非标测量设备最佳校准系统值

通过利用田口技术对非标测量设备校准参数的计算，可以更好控制产品质量，以满足产品的需要。     

A Finite Element Computational Method for Gas Hydrate. Part I: Theory

A finite element scheme is presented to model the dissociation of gas hydrates in porous media by hot water injection. We show a complete derivation of the finite element formulation, including the associated mass and energy conservation equations capable of performing transient analysis of both conductive and convective heat transfer for gas and liquid flow in porous media. The scheme also includes the latent heat effect to accommodate the change of phase due to melting of hydrate. In the companion paper, Part II, this method is successfully applied to hydrate reservoirs.     

Changes in polymer foils used in food packaging tested by using differential scanning calorimetry

This work is an experimental study of the differential scanning calorimetry characterisation of polymer materials used in food packaging materials, such as polypropylene (0.03 mm), polyethylene (0.1 and 0.03 mm), poly(D-(-)-Β-hydroxybutyrate) (powder), two-layered polypropylene (0.064 mm), and two-layered polypropylene with poly-vinylidene-chloride (0.012/0.021). The polymer stability was checked by simulation of conditions during food preparation in microwave ovens, sterilisation or rapid freezing. The materials were tested in the temperature range from 40 to 200‡C at different scan rates from 2 to 30°C min⁻¹ during heating or cooling. The enthalpies show a high correlation coefficient (0.964) with scan rate. All samples undergo phase change in the temperature range from 107 to 173°C during heating and enthalpies are in the range from 31.8 to 71.1Jg⁻¹. Upon subsequent cooling from 200°C, the temperature range of phase changes is shifted to lower temperatures from 86 to 102°C with enthalpies ranging from 30.4 to 57.8 J g⁻¹. Experiments with exposure of polymers to microwave radiation and freezing prove that the phase change considering the temperature range is very similar in all experiments.     

An investigation of the unstable region for dense phase conveying in sliding bed flow

For fine powdered materials, capable of being conveyed in dense phase, a conveying region exists in which instability in flow and pipeline blockage can occur if the pressure gradient available is insufficient to maintain a minimum value of solids loading ratio. A reduction in material flow rate can also lead to pipeline blockage in this region. Conveying trials under-taken with cement are used to illustrate the nature of the problem.     

棒状液晶分子相变问题的机械旋转模型研究

综述一种关于棒状液晶材料的分子结构与液晶相的相关关系的研究成果。介绍了有关液晶分子的机械旋转模型。该模型将液晶分子视作一种高速旋转的转子,通过分子参数计算,对液晶材料的相变温度和分子结构之间的关系给出了一种全新的解释。最新研究表明,含氟三苯液晶材料的分子结构中存在slim和fat现象,能够对液晶材料的相变进行合理解释。该模型能够通过简单的模型方法对新型液晶材料的分子设计与合成提供有用的信息。     

浅析分户供热的计量

本文介绍了国外在供热分户计量方面的测定原理、手段和设备,费用分配原则,仪表与系统的配合和安装方式,并就其与国内系统的配合提出了建议。     

尺度目标识别中的若干技术问题

从工程应用的角度阐述了现代鱼雷常用的尺度目标识别原理，讨论了影响识别距离的若干因素和措施，提出了小尺度模拟靶通过亮点延时算法以弥补尺度不足及其试验技术，试验结果表明，该方法可以获得良好效果。