Ce3+离子对掺Er3+碲酸盐玻璃光谱性质的影响

研究了Ce3 + 对掺Er碲酸盐玻璃荧光光谱性质的影响 ,比较了不同的Ce3 + 掺杂浓度下Er3 + 离子荧光发光强度的变化 ,分析了Ce3 + 离子对Er3 + 离子作用的原理 ,应用经典方程计算了Er3 + 离子 4I1 1 / 2 能级的荧光寿命及其变化     

由ZF—6玻璃片构成的磁光旋转器

所提出的磁光旋转器是由Ｖｅｒｄｅｔ常数小的普通ＺＦ－６小玻璃片和带有窄缝隙的小电磁铁组成，当电磁铁线圈的功耗为１０Ｗ时，可得到２１°的法拉第旋转。     

Diffusion in metallic glasses

Rutherfordα-particles backscattering technique was employed for measurements of diffusion rates in metallic glasses. Effects of relaxation, crystallization and plastic deformation on diffusion rates were also investigated. It has been observed that the diffusion rates of a metallic solute are of the same orders of magnitude in both metal-metal and metal-metalloid glasses. A higher diffusivity is likely if there is a large difference between melting points of the solute and matrix. Relaxation has no effect on diffusion, however, diffusivity increases on crystallization. An increase in diffusivity is also observed on plastic deformation of metallic glass.     

Effects of Substrate Temperatures on the Structure and UV-shielding Properties of TiO_2-CeO_2 Films Deposited on Glass by Radio-frequency Magnetron Sputtering

1Introduction Theultravioletrays(UV)insunlight(-4%)cantransmitintoroomthroughcommonfloatglass,theUVcanmakethematerialsintheroom,eg,paper,furni ture,textilefabricandplastics,becoloredanddeterio rated.ShieldingfromUVirradiationisofinterestinmanyfields.Formu…     

Heterogeneous Plantinum Nucleation and Crystallization of a Heavy-Metal Fluoride Glass

The effect of controlled heterogeneous nucleation by platinum on the crystallization of a ZrF₄-BaF₂-LaF₃-AlF₃-NaF (ZBLAN) glass was studied. Various levels of platinum were incorporated into this glass by a combination of PtCl₂-doping and melting-atmosphere variation. The effect of doping levels and melting conditions on the incorporation of platinum and the subsequent nucleation of crystals was studied by optical microscopy, scanning electron microscopy, differential scanning calorimetry (DSC), and X-ray diffraction. Increased platinum in the glass resulted in an increased number of nucleation sites for the growth of β-ZrF₄-BaF₂ crystals. Analysis of isothermal and ramp-rate DSC measurements indicated that the crystallization of this glass changed from surface controlled to bulk controlled with an increased number of nuclei. This was confirmed by optical microscopy. In addition, Avrami analysis of the isothermal crystallization data gave an accurate approximation of the number of nuclei in the glass.     

锆钡镧铝氟化物玻璃的分相研究

本文综述了氟化物玻璃中的分相研究。在前人研究基础上应用透射电镜，X射线能谱，电子能量损失谱及X射线衍射，差热分析等研究了锆钡镧铝氟化物玻璃中的液-液分相，发现此种现象普遍存在于该类玻璃之中。对玻璃成分与分相形貌及微观结构之间的关系、对析出晶相种类及分相与析晶的相互影响进行了研究。提出欲降低氟化物玻璃的光损耗，分相与析晶一样是不容忽视的因素。     

磷酸盐玻璃中Er~(3+)离子的光跃迁和激光作用

给出了Li-Al磷酸盐玻璃中Er~(3+)离子发射特性(Ar、σ_ρ、β、τ_γ)的计算结果。报道了Cr~(3+)→Yb~(3+)→Er~(3+)的一种有效能量转移,并获得了室温下3J1.54μm波长的激光输出。     

Predicting plant yields using soil testing for phosphorus: Effects of error in the estimation of the maximum yield on interseasonal comparisons of yield prediction

Results from long-term field experiments in south-western Australia are presented in the form of relationships between yield, expressed as a percentage of the maximum yield, and soil test for phosphorus (P) values. Maximum yields were not always indicated by well defined yield plateaux. Different methods have been used to estimate the maximum yield value which is used to calculate yield as a percentage of the maximum yield so as to remove interseasonal variation. For all of these methods and for the same site, the same P fertilizer (superphosphate), and the same plant species, the relationship between yield and soil test P differed for different years. Consequently fertilizer recommendations based on the assumption that this relationship is constant are likely to be incorrect. We therefore question the validity of the common practice in soil testing programmes of using percentage yield values to remove interseasonal variation.     

水工钢闸门聚酯玻璃钢复合防腐处理方法

水环境的恶化，使水工钢闸门腐蚀加重，传统的防腐工艺保护效果下降。聚酯玻璃钢复合防腐层的水工钢闸门防腐工艺具有使用设备少，工艺简单、防腐效果好、成本低等优点，适用于在各种水环境中作各种形式的水工钢闸门防腐，效果良好。该文结合江苏省淮海农场工程施工经验，提出了水工钢闸门聚酯玻璃钢复合防腐层结构设计、施工工艺及质量标难，为今后的推广应用提供了一定的参考依据。     

Acoustic study of nano-crystal embedded PbO-P2O5 glass

Nano-crystal embedded PbO-P₂O₅ glass has been prepared and characterized by XRD and TEM measurements. The ultrasonic velocity and attenuation measured within the temperature range 80–300 K show significant structure and interesting feature with the presence of nano-crystalline region. The glass samples were prepared by melt-quench method and nano-crystals of different sizes were produced by heat treatment of the glasses for different durations of heating. All the processes were carried out at or above glass transition temperature. A theoretical model that takes account of the effects of thermally activated relaxation, anharmonicity as well as microscopic elastic inhomogeneities arising out of fluctuations has been successfully applied to interpret the variation of ultrasonic velocity and attenuation data. An interesting outcome of this application has been to propose a method for the determination of the size of nano-crystals from the ultrasonic attenuation data.