膜结构裁剪膜片展开的二次测地线法

本首先对目前应用较广的膜结构裁剪方法，即裁剪线生成与图形展开的方法进行了比较研究，并在此基础上提出了一种新的裁剪方法——二次测地线法．通过对有理论解算例的分析及对不同形式的膜结构进行裁剪，验证了本方法的正确性、可靠性及广泛适用性．     

Economic Model to Optimize Underground Utility Protection

The need for better protecting our vital infrastructure from being damaged or destroyed has received increased attention since the terrorist attacks on September 11, 2001. The tragedy of having thousands of innocent people die before the eyes of an entire nation awakened people to the reality of “managed” attacks of unthinkable magnitudes. However, tragedies of a smaller scale are a daily occurrence but accepted as “collateral damage” of work in an unsafe environment. This paper presents a cost-benefit analysis to address the question of how much money should be spent in protecting underground utilities from damage. During the study of an actual incident it was found that the total costs of such accidents are vastly underreported because only costs for emergency responses and repair are tallied up. This paper makes the case that a comprehensive approach for assessing the total economic impact of such incidents on the public, business, and government is the critical stepping stone to a mathematical optimization of expenditure for damage prevention. In addition, the reader will quickly realize that the use of the presented optimization model provides theoretical underpinning for the engineering profession in its effort to better protect our critical infrastructure from terrorist attacks.     

压电陶瓷微位移器件迟滞模型的研究

在通过统计物理学角度分析压电陶瓷迟滞规律的基础上，结合数学建模方法，提出了一种简单实用的压电陶瓷迟滞数学模型。并设计了压电陶瓷实验控制系统，对迟滞数学模型进行了验证，实验结果表明，此模型可以有效减小压电陶瓷的迟滞非线性误差，提高压电陶瓷微位移的控制精度，本研究有助于实现基于压电陶瓷的高精度开环微位移控制。     

Delamination Analysis for Laminated Composites. II: Numerical Verification

A validation of the delamination analysis models developed in a companion paper is provided through comparisons of predictions with finite‐element and elasticity solutions. The models are applied to the analysis of composite compression specimens reinforced with end tabs. An elasticity solution for the gage section of the specimens is developed. A comparison of the characteristic roots shows that the predictions of the models include the material and geometric parameters that control the behavior, and the roots corresponding to the basic stretching and bending modes are accurately predicted. The stress distribution at the interface between tabs and specimen is in good agreement with a finite‐element simulation. The interlaminar shear and peel stresses show an exponential increase with a maximum intensity at the free edges of the tabs. The behavior of previously tested specimens is explained; and practical guidelines for specimen design are provided to avoid unwanted extraneous modes of failure. The influence of the deformation modes associated with each model is investigated. An assessment of the accuracy and level of complexity is presented.     

分割电极片状压电致动器——(二)位移特性及狭缝宽度对其影响的实验研究

研究了悬臂梁式分割电极片状压电致动器的位移特性。理论分析表明，分割电极狭缝宽度会减小致动器自由端的位移输出，但当狭缝宽度小于致动器电极宽度的１０％时，可忽略狭缝宽度的影响。致动器端部位移的测试结果大于理论计算值。与现有磁头悬浮臂尺寸相近的致动器，在２０Ｖ～５０Ｖ的电压驱动下均可获得１μｍ～２μｍ的致动位移。对９８５０道／厘米的密度磁盘，该位移能覆盖至少一个磁道宽度，满足磁头定位两级伺服系统对第二级致动器位移的基本要求。     

The mechanisms of suppression and enhancement in comprehension.

The goal of comprehension is to build coherent mental representations or structures. These structures represent clauses, sentences, paragraphs, passages, and other meaningful units. Thus, comprehending a clause requires building a mental structure to represent what that clause is about; comprehending a sentence requires building a mental structure to represent what that sentence is about; comprehending a passage requires building a mental structure to represent what that passage is about. In Gernsbacher (1990), I described a simple framework for understanding how comprehenders build mental structures during comprehension. I call this framework, the Structure Building Framework. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Graph‐Theory Approach to Eigenvalue Problem of Large Space Structures

The dynamic analysis and control system design of large space structures involve the solution of the large‐dimensional generalized matrix eigenvalue problem. The computational effort involved is proportional to the third power of the dimension of the matrices involved. To minimize the computational time a graph‐theory approach to reduce a matrix to lower‐ordered submatrices is proposed. The matrix‐reduction algorithm uses the Boolean matrices corresponding to the original numerical matrices and, thus, the computational effort to reduce the original matrix is nominal. The computational savings directly depend upon the number of submatrices into which the original matrix is reduced. A free‐free square plate is considered as an example to illustrate the technique. In this example a matrix of 16th order is reduced to three scalars corresponding to three rigid‐body modes, and three matrices of order three and one matrix of order four.     

上海市电话局用户接入网发展状况

上海市电话局用户接入网建设经历了调研、网络规划、启动实施和进一步完善、规范四个怅阶段、现已基本形成了覆盖政府机关、大专院校、医院、商务大楼及高层建筑、新建住宅小区、区级以上图书馆等范围的用户光纤网络，为加快经济建设步伐、满足多层次用户需求、拓展电信新业务打下了坚实基础。     

T_C≥400°C高温PTC陶瓷的研制

利用国产原料，采用传统的陶瓷材料制备工艺，研制了居里温度ＴＣ≥４００°Ｃ的高温ＰＴＣ陶瓷，制成了居里温度ＴＣ＝４１２°Ｃ，电阻Ｒ≤１０３Ω，ｌｇ（Ｒｍａｘ／Ｒｍｉｎ）＝４的高性能ＰＴＣ热敏陶瓷材料