压电复合材料PT－P（VDF／TeFE）的静水压压电性

用热轧辊机制备了压电复合材料ＰＴ－Ｐ（ＶＤＦ／ＴｅＦＥ），并利用ＬＣＲ电桥和Ｂｅｒｌｉｎｃｏｕｒｔ电路分别测量了其介电常数和压电常数，实验结果表明它具有良好的静水压压电特性。最后讨论了该复合材料在水听器中的应用     

IPN压电阻尼材料的研究进展

阻尼材料广泛应用于交通工具、产业机械、建筑土木、家用电器、精密仪器和军事装备等领域。科学技术的不断发展,对阻尼材料的要求不断提高。本文主要综述了阻尼材料的发展状况,阐述了粘弹性阻尼、高阻尼合金、阻尼复合以及聚合物基压电智能阻尼材料的阻尼机理,并详细分析介绍了聚合物基IPN压电阻尼材料的设计原理及阻尼效果。     

Mn2+、Nb5+共掺BaTiO3陶瓷的制备及压电性能的研究

本文采用改进的固相反应法,制备了施主杂质Nb5 和受主杂质Mn2 共掺的BaTiO3陶瓷。按不同Nb5 、Mn2 的掺杂量,分别在1180℃、1210℃、1250℃、1280℃温度下煅烧。实验结果表明:当烧结温度为1250℃、掺杂量为0.05mol%时,制得的试样性能较好。     

Piezo- and pyroelectricity in polymer blends of poly(vinylidene fluoride)/poly(methyl methacrylate)

Compatible polymer blends of poly(vinylidene fluoride) (PVDF) and poly(methyl methacrylate) (PMMA) can be used as suitable model systems for investigating the relationship between the physico-chemical structure of polymers and their piezo- and pyroelectric activity. The structure of PVDF/PMMA blends can be varied over a very wide range which can lead to a strong influence on the piezo- and pyroelectric activity and the corresponding coefficients d₃₁ and g₃. The values of d₃₁ and g₃ were found to vary over nearly five decades whereas the normalized coefficients $\text{d}{}_{31}\text{P}$ and $\text{g}{}_3\text{P}$ remain largely unaffected. This emphasizes the importance of the molecular processes causing the macroscopic polarization P during the poling procedure. For a given polarization P and a given temperature T the properties of the polymer matrix, however, are far less important for the values obtained for d₃₁ and g₃. The experimental results were compared with theoretical predictions based on models which were recently developed by Tashiro et al., Broadhurst et al. and by Mopsik et al.. Considering the appropriate scope of each model a good agreement between theory and experiment is observed and general contradictions have not been found.     

Self-assembled patterned CoFe2O4-SrRuO3 electrodes: Enhanced functional properties by polar nano-regions reorientation

Epitaxial CoFe₂O₄ (CFO) and SrRuO₃ (SRO) nanopillar heterostructures were deposited on Pb(Mg_1/3Nb_2/3)_0.70Ti_0.30O₃ (PMN-30PT) single crystal substrates by switch pulsed laser deposition (SPLD). Since the CFO nanopillars are insulating, and the SRO matrix conductive, this self-assembled nanopillar heterostructure served as a patterned electrode on PMN-PT, which then enhances the dielectric and piezoelectric constant of the substrate. Cross-sectional electron microscopy images revealed the formation of a nanopillar heterostructure layer with CFO nanopillars within a SRO matrix. AFM and XRD revealed good topography and epitaxy, indicating a high quality SRO-CFO self-assembled nanopillar structure. Using a SRO-CFO thin film patterned electrode, PMN-PT was found to have a notably higher (30%) dielectric constant with increasing electric field and enhanced transverse broadening in reciprocal spacing mapping (RSM) scans.     

The influence of oxygen vacancies on piezoelectricity in samarium-doped Pb(Mg1/3Nb2/3)O3-PbTiO3 ceramics

A study of 0.71Pb(Mg_1/3Nb_2/3)O₃-0.29PbTiO₃ shows that, when it is doped with 2.5% Sm on the A-site, in addition to an almost threefold increase in piezoelectric charge coefficient and dielectric permittivity, there is a 2 order of magnitude reduction in conductivity, attributed to a decrease in oxygen vacancy concentration. An analysis of the nonlinearity of permittivity with respect to field amplitude shows that both the reversible and irreversible contributions increase significantly with Sm-doping, with simple models showing that these changes are consistent with a reduction in the concentration of dipolar defects that can inhibit both polarization rotation and domain wall translation. Contrary to the argument that doping increases heterogeneity, there is little change in the diffuseness of the peak in permittivity as a function temperature, whilst there is a 15% increase in spontaneous polarization with Sm addition. Through comparison of the Rayleigh law parameters with those published for other piezoelectric materials, it is concluded that a significant contribution to the observed increase in piezoelectric performance due to Sm-doping of PMN-PT is similar in origin to that seen in soft, donor-doped PZT and other conventional piezoelectric ceramics.     

压电/磁电复合式MEMS振动驱动微能源的研究

为了满足无线传感网络节点对供电电源的自供电、低功耗、持续稳定供电的要求,研究了一种可以将环境中机械能转化为电能的MEMS压电-磁电复合式振动驱动微能源,结合压电转换与磁电转换把振动能转换为电能。建立数学模型,用有限分析软件Ansys12.0对不同尺寸的四悬臂梁-中心质量块结构进行力学特性分析,并对加工出的器件进行性能测试。测试结果表明,谐振频率为290Hz下,器件输出电压峰峰值随振动加速度的增加呈线性增加,1 m/s2和6 m/s2激励下有效输出电压分别为61mV和324mV,有望为无线网络传感节点提供性能高、寿命长、自供给的供电电源。     

Field-Induced Multiscale Polarization Configuration Transitions of Mesentropic Lead-Free Piezoceramics Achieving Giant Energy Harvesting Performance

The development of high-performance (K,Na)NbO₃ (KNN)-based lead-free piezoceramics for next-generation electronic devices is crucial for achieving environmentally sustainable society. However, despite recent improvements in piezoelectric coefficients, correlating their properties to underlying multiscale structures remains a key issue for high-performance KNN-based ceramics with complex phase boundaries. Here, this study proposes a medium-entropy strategy to design “local polymorphic distortion” in conjunction with the construction of uniformly oversize grains in the newly developed KNN solid-solution, resulting in a novel large-size hierarchical domain architecture (≈0.7 µm wide). Such a structure not only facilitates polarization rotation but also ensures a large residual polarization, which significantly improves the piezoelectricity (≈3.2 times) and obtains a giant energy harvesting performance (W_out = 2.44 mW, P_D = 35.32 µW mm⁻³, outperforming most lead-free piezoceramics). This study confirms the coexistence of multiphase through the atomic-resolution polarization features and analyzes the domain/phase transition mechanisms using in situ electric field structural characterizations, revealing that the electric field induces highly effective multiscale polarization configuration transitions based on T–O–R sequential phase transitions. This study demonstrates a new strategy for designing high-performance piezoceramics and facilitates the development of lead-free piezoceramic materials in energy harvesting applications.     

CeO2掺杂制备Ba0.9Ca0.1Ti1-xSnxO3压电陶瓷的结构及电性能

采用传统的陶瓷烧结技术,通过添加0.15%(摩尔分数)CeO2,在1120℃烧结2h,成功制备了新型无铅压电陶瓷Ba0.9 Ca0.1 Ti1-x Snx O3,并且检测了陶瓷样品的微结构和电性能.XRD显示所有陶瓷样品均具有纯的钙钛矿结构,在室温下为典型的四方相,SEM显示适量添加锡离子可以提高陶瓷致密性.在室温下,锡离子改性的BaTiO3基压电陶瓷在x=0.02处显示了优异的压电、介电和铁电性能(d33=276 pC/N,kp=46%,εr=3678,tanδ=2.4%,Pr=18.2μC/cm2,EC=1.12 kV/mm).这些优异的检测结果证实适当添加锡离子能改善BaT iO3基压电陶瓷的电性能.     

Correlation of direct piezoelectric effect on EAPap under ambient factors

Direct piezoelectricity of electro-active papers(EAPap)is analysed in this paper. The test setups for direct effect are designed and determined. Different ambient factors impacting the piezoelectricity of EAPap, such as temperature, humidity, and strain rate, are applied and analyzed. Strong piezoelectricity of EAPap is found on the basis of the test results and in comparison with polyvinylidene fluoride(PVDF)and lead zirconate titanate(PZT)-5H. The maximum piezoelectric constant is achieved to be 504 pC/N. The reason of strong piezoelectricity of EAPap is discussed in this paper. The potential of EAPap as a biomimetic actuator and sensor is also investigated.