温差引起管子在斜面上的蠕动现象

在斜面上布置管路时,虽然设计上满足了管子自重下滑力与其摩擦力的平衡,但工程实际中管子仍会下滑从而造成变形破坏。详细分析了破坏的原因,认为是由于温差引起管子在斜面上蠕动而造成的。     

Material surface layer damage estimation for cyclic loading conditions using the nanoindenting and nanoscratching techniques

The nanoindenting method is based on the automatic measurement and recording of the force acting on the indenter (10⁻²-5 N) and the depth of indentation (10⁻²-200 μm). The scratch hardness or nanoscratching method is based on the continuous recording of resistance forces to movement of the indenter impressed into the surface. __________ Translated from Problemy Prochnosti, No. 4, pp. 132–139, July–August, 2006.     

Residual strength prediction of multiple cracked stiffened panels

Prediction of the coalescence of adjacent cracks is critical for residual strength estimation of structures under multiple site damage conditions. A methodology successfully developed for the case of crack link‐up prediction of un‐stiffened plates, is extended for the case of typical cracked stiffened aircraft panels. The proposed link‐up criterion is based on the change in the magnitudes of elastic and plastic strain energies of the stiffened panel, before and after the cracks coalesce. The strain energy magnitudes of interest are calculated using non‐linear elastic–plastic finite‐element analysis. For the application and verification of the method, experimental results from the open literature are used. Residual strength values calculated by the proposed methodology are in good agreement with the experimental results. The present criterion provides superior results when compared to the existing and commonly applied link‐up criteria.     

大型预焙电解槽侧部碳块破损的原因及补救措施

分析了电解槽侧部碳块破损的现象及原因,并提出了一些破损补救方法,以期对大型电解槽生产管理工作有一定帮助.     

氧化锆水口在使用中的损毁机理初探

通过对用后氧化锆水口砖的显微结构及矿相分析,认为氧化锆水口砖的损毁主要是由于钢水和渣的侵蚀造成氧化锆中的稳定剂脱溶失稳分解产生的,同时由于热应力产生的微裂纹导致钢水的进一步渗透,加快了水口的侵蚀速度.     

氧化铝熟料窑内衬选用方案的探讨

介绍了中铝山西分公司氧化铝熟料窑窑体内衬生产中存在的问题,分析了内衬损坏机理,提出了改进方案.     

Differential Fos Expression Following Aspiration, Electrolytic, or Excitotoxic Lesions of the Perirhinal Cortex in Rats.

The authors explored the possibility that there are different neural consequences, beyond the primary site of brain damage, following perirhinal cortex (PRh) lesions made in different ways. Fos expression was used as a marker for neuronal activation and compared across the forebrains of rats that underwent the different types of surgery. Electrolytic and excitotoxic PRh lesions produced dramatic increases in Fos expression in the cortex, and excitotoxic and aspiration PRh lesions increased Fos expression in the dentate gyrus. These data are consistent with the hypothesis that different lesion methods have separable effects on neural function in regions outside the lesion site that could account for inconsistencies in the literature regarding the behavioral effects of PRh lesions on tests of spatial memory. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Theoretical and Experimental Damage Prediction in Cold and Semi‐Hot Bulk Forming of Ductile Steels

Bulk forging is among the most important manufacturing methods in metal forming, due to its wide applicability from some ounces to several tons of steel in a high diversity of shapes and forming conditions. Economical constraints demand for further optimisation and cost‐effective production. This requires the application of suitable finite elements simulation software, in order to support the already digitalised construction processes. Ductile damage is one of the most severe problems to arise during the production sequences, not only in cold but also in semi‐hot forging operations. Mathematical approaches exist for the modelling and simulation of ductile fracture in steel. In this paper some widespread used damage models are introduced and discussed. Their damage prediction quality has been verified by experiments, the tensile test and the collar specimen upsetting with several different steels under cold and semi‐hot forging conditions. The methods for the experimental fracture detection are introduced as well. In cold forging the passive ultrasonic testing with integrated statistical filtering algorithms is used. As this method is not applicable to semi‐hot forging experiments, optical fracture detection by means of a high‐speed camera is used instead. A very interesting material behaviour of the steels tested has been identified in the semi‐hot upsetting of collar specimen. For every steel a distinct temperature crossover interval exists, in which the forging process abruptly changes from damaged to undamaged state. This interval amounts to some degrees Celsius only for each of the seven materials investigated. Among the damage models proposed, the Model of Effective Stresses by Lemaitre is chosen for the application to a cold and a semi‐hot forging operation. These industrial processes of an axle end (cold) and a journal bearing (semi‐hot) are susceptible to damage for reasons to be discussed in this paper. It will be shown that the internal fracture of the axle end (chevrons) and the surface fissures of the journal bearing can be predicted with high accuracy. Moreover, the application of the damage model in the finite element software MSC.SuperForm 2004 offers a promising approach for process optimisation. Several possibilities could be tested for their suitability of reducing the calculated damage: geometry variation of the forming tools, process annealing, different materials. The use of damage models in finite element simulation can be regarded as a further step towards an optimal process design.     

模拟点蚀油气管线钢的拉伸性能

根据发生点腐蚀的油气管线基体有许多点蚀坑的特点,通过计算机产生随机数确定点蚀坑的位置,用小钻头打孔的方法模拟X60管线钢基体的多孔特征进行拉伸试验,测得其弹性模量、屈服强度和抗拉强度,并将理论计算值与前二者进行比较和修正,给出了多孔钢材的抗拉强度与孔隙率的函数关系.结果表明,多孔钢材弹性模量的实测值随孔隙率的变化与理论预测结果较为吻合;钢材实测屈服强度也随着孔隙率的增加而减少,但在较高孔隙率时其减少趋势变缓;衰减速率的实测值略大于理论预测值;实测抗拉强度随孔隙率的变化曲线与屈服强度相似,但对孔隙率更敏感.     

Fatigue damage accumulation of cold expanded hole in aluminum alloys subjected to block loading

Fatigue damage accumulation of cold expanded hole in aluminum alloys used in land transportation components was investigated. Tests were carried out using pre-cracked SENT specimens and inserting an expanded hole at the crack tip. The degree of the cold expansion was chosen equal to 4.3%. Tests were performed in two and four block loading under constant amplitude. Two sequences were compared.The increasing and the decreasing magnitude were compared. The experimental results were compared to the damage calculated by the Miner's rule and a new simple fatigue damage indicator. This comparison shows that the ‘model of the damage stress’, which take into account of the loading history, yields a good estimation of the experimental results. Moreover, the error is minimized in comparison to the Miner's model.