高炉铜冷却壁凝固过程数值模拟

在对铜冷却壁砂型 金属型复合铸造条件下的热态工况进行分析的基础上,利用有限元数值模拟的方法首次建立了铸型传热分析对称模型。在模型中对铸型传热系统中的对流、辐射、接触边界条件和凝固潜热进行了处理,利用有限元分析软件ANSYS,分析了紫铜冷却壁的温度场的变化。数值模拟的结果与实际生产相当吻合。     

抽真空截止点的位置对压铸件气孔的影响

在真空压铸中 ,抽真空截止点的确定对压铸件的品质影响很大 ,过早和过迟将影响压铸的连续生产和不利于减少铸件的气孔。抽真空截止点应设在冲头快压射前 15～ 2 0mm处 ,真空压铸可以提高铸件的密度 1%以上。     

板料弯曲回弹的有限元模拟影响因素研究

阐述了板料成形数值模拟中回弹问题的研究历史和发展现状,分析了塑性弯曲加工中工件发生弯曲回弹的原因、特点及有限元模拟过程的影响因素,总结了回弹模拟的算法,从成形过程模拟和回弹计算两方面系统分析了影响回弹模拟准确性和收敛性的主要因素及改进方向,讨论了模具设计中回弹的补偿算法 ,并提出了当前控制回弹的基本方法     

Dual–primal proximal point algorithms for extended convex programming

This paper presents a class of dual–primal proximal point algorithms (PPAs) for extended convex programming with linear constraints. By choosing appropriate proximal regularization matrices, the application of the general PPA to the equivalent variational inequality of the extended convex programming with linear constraints can result in easy proximal subproblems. In theory, the sequence generated by the general PPA may fail to converge since the proximal regularization matrix is asymmetric sometimes. So we construct descent directions derived from the solution obtained by the general PPA. Different step lengths and descent directions are chosen with the negligible additional computational load. The global convergence of the new algorithms is proved easily based on the fact that the sequences generated are Fejér monotone. Furthermore, we provide a simple proof for the O(1/t) convergence rate of these algorithms.     

Point-augmented biquadratic C1 subdivision surfaces

Shape artifacts, especially for convex input polyhedra, make Doo and Sabin’s generalization of bi-quadratic (bi-2) subdivision surfaces unattractive for general design. Rather than tuning the eigenstructure of the subdivision matrix, we improve shape by adding a point and enriching the refinement rules. Adding a guiding point can also yield a polar bi-2 subdivision algorithm. Both the augmented and the polar bi-2 subdivision are complemented by a new Primal Bi-2 Subdivision scheme. All surfaces are $C^1$ and can be combined.     

图像处理建立混凝土有限元模型探讨

针对工程中常用的混凝土材料的不均匀特性,提出了一种基于图像处理技术建立二维混凝土有限元模型的方法.该方法综合图像处理过程中的图像增强、消除噪声和边缘检测技术建立人机对话平台,并结合网格自动划分技术建立非均匀有限元模型.通过一个实例,验证了该方法的有效性.     

Bounded Consensus Algorithms for Multi‐Agent Systems in Directed Networks

In this paper, the consensus problem is investigated via bounded controls for the multi‐agent systems with or without communication. Based on the nested saturation method, the saturated control laws are designed to solve the consensus problem. Under the designed saturated control laws, the transient performance of the closed‐loop system can be improved by tuning the saturation level. First of all, asymptotical consensus algorithms with bounded control inputs are proposed for the multi‐agent systems with or without communication delays. Under these consensus algorithms, the states’ consensus can be achieved asymptotically. Then, based on a kind of novel nonlinear saturation functions, bounded finite‐time consensus algorithms are further developed. It is shown that the states’ consensus can be achieved in finite time. Finally, two examples are given to verify the efficiency of the proposed methods.     

Optimal blank design based on finite element method for blades of large Francis turbines

Metal pressing process that is widely used in industries has advantages over casting process for producing large Francis turbine blades from thick plates. Prior to the pressing process, blank design is firstly performed to determine flat blanks. The traditional trial and error approach is not applicable to blade design for Francis turbines that are not standard due to hydraulic characteristics of power plant sites. The rapid development of computing technology makes it possible to obtain optimal flat blanks by numerical modelling and simulation. In this paper, inverse finite element approach is investigated for blank design and an elasto-plastic model has been built using the well-known commercial software ANSYS. Numerical simulations for blade unfolding models with thick shell elements, solid elements and shell elements have given results with negligible differences. Unfolding tests with simple geometries have been carried out and the numerical results agree well with the analytical solutions. A large and thick shape of a Francis turbine blade for a hydropower plant has been successfully unfolded by inverse FE model. Sensibility analysis shows that the middle surface of the flat blank is independent of blade thickness. For ensuring the machining of the blade after the pressing process, a new contour is obtained by extending the boundary of the flat blank provided by the numerical model. This research may provide a useful tool for optimal blank design of Francis turbine blades.     

ALOF——新一代三维疲劳裂纹扩展分析软件

针对当前亟需开发能分析和评估含缺陷工程结构及装备的专业商业软件的现况,基于成熟的扩展有限元法(eXtended Finite Element Method,XFEM)和自主研发的虚节点法(Virtual Node Method,VNM),推出具有完全自主知识产权的三维疲劳裂纹扩展分析软件ALOF(Analyses Laboratory of Fracture).介绍ALOF求解断裂问题的流程及其特点:可以方便地导入完整的CAD模型及多种形式的裂纹模型,可以自动生成疏密合理的二维和三维裂纹扩展分析网格;具有丰富的失效准则库;能自动分层加密裂尖区域网格;能全自动地进行裂纹扩展计算等.与同类软件相比,ALOF更简单、更精准、更高效和更专业.利用ALOF进行的3个实际工程案例表明,ALOF能准确、高效评估任意复杂缺陷体的剩余强度和疲劳寿命.     

基于HCM的可扩展路由器体系结构MER

本文提出了基于层次化协同模型的多维可扩展路由器MER。参考Open Router路由器模型,利用层次化协同模型实现了独立于数据层的控制平台CSP,奠定了开放控制的基础;基于功能插件和抽象插件构造了基于插件的路由器抽象层PRA,分离了控制与转发平面,支持路由器转发平面功能的动态扩展;并举例说明了MER中高效的网络应用控制路由选择机制,体现了直接控制原理,有助于设计更为复杂的控制策略。模拟结果表明,MER具有良好的扩展性,支持网络应用直接控制,为控制平面智能化奠定基础。