Modelling of copper etching in aerated chloride solutions

The effect of dissolved oxygen on the rate of chemical etching of copper by acidic cuprous chloride solution was investigated numerically for the case of a rotating disc electrode (RDE). Copper dissolution in aerated acidic cupric chloride solutions of composition 3.5M CuCl2 + 0.5M HCl + 0.5M KCl and 3.5M CuCl2+0.5M HCl was investigated with consideration of the instantaneous homogeneous reaction 4CuCl32-+4H++O2rlhar4CuCl 3-+2H2O which takes place within the mass transport boundary layer. It was assumed that CuCl32- and O2 react instantaneously, resulting in the formation of a reaction plane which separated the mass transport boundary layer into two regions: a region adjacent to the electrode where oxygen was depleted, and a region adjacent to the bulk where CuCl32- was absent. A one-dimensional mathematical model was developed to predict the position of the reaction plane. The model accounted for diffusion, migration and fluid flow generated by an RDE and included nine species and five heterogeneous electrochemical reactions. The homogeneous redox reaction served to regenerate the chemical etchant solution and thus enhance the etch rate. With increasing oxygen concentration and rotation rate the reaction plane was found to move closer toward the electrode and thus the etch rate of copper increased. Addition of KCl increased the Cl- content in solution so as to shift the reaction plane toward the bulk.     

Galvanostatic and microscopic studies of nodulation during copper electrolysis

The galvanostatic technique on a laboratory scale has been shown to be a useful tool in detecting the presence of nodules on the cathode during copper electrodeposition by using the value of the starting electrolytic potential and by the presence of a cathodic polarization peak on the potential–time curve. Studying the morphology of the deposit with a scanning electron microscope at various magnifications confirmed the galvanostatic results. It is postulated that inappropriate concentrations and/or ratios of the additives (thiourea, gelatin and chloride ions) are associated with a certain current density that generates intergranular microcracks due to adsorption of the additives and leads to the formation of nodules at the macroscale.     

硬聚氯乙烯低发泡挤出成型研究

采用自由发泡挤出的方法研究了硬聚氯乙烯低发泡挤出成型的配方设计和工艺条件控制。讨论了稳定剂品种，改性剂品种和发泡剂用量对制品密度，泡孔结构以及外观表面的影响。还揭示了口模温度和螺杆转速与制品密度的关系。     

金属皂类热稳定剂对RPVC流变性能的影响

采用Brabender转矩流变仪，分析并探讨了硬酯酸钡（BaSt2）、硬酯酸铅（PbSt2）、硬酯酸钙（CaSt2）、硬酯酸锌（ZnSt2）4种硬酯酸金属皂类热稳定剂以及复配BaSt2／PbSt2热稳定剂对硬质聚氯乙烯（RPVC）流变性能的影响。结果表明，BaSt2，CaSt2能够促进RPVC的塑化，而PbSt2和ZnSt2却推迟RPVC的塑化；在复配BaSt2／PbSt2稳定剂体系中，随着BaSt2比例的增大，塑化时间缩短，但BaSt2与PbSt2按分子数1：1比率时，RPVC熔体粘度增幅较大。     

镁铝水滑石及其复合体系对PVC热稳定性能的调控

采用比色法、热失重法等研究了不同镁铝摩尔比的水滑石(LDHs)对PVC糊热稳定性能的影响。结果表明,在镁铝比分别为2、3、4的样品中,镁铝比为2的LDHs对PVC的热稳定效果最佳;将其与传统的铅盐、有机锡稳定剂复配,均具有良好的协同效应,可以实现对PVC糊热稳定性能的控制。其中,PVC/Mg-AlLDHs/Sn以100∶1.5∶1.5(质量份数,下同)比例复合后的体系,不仅热稳定性能优于传统的的铅盐体系,而且具有较低的糊黏度及较好加工流变性能。     

一种单面涂铝PVC塑料吊顶材料燃烧性能的实验研究

采用锥形量热仪对市场上常见的一种内装修单面涂铝PVC吊顶材料的燃烧性能进行了实验研究。实验结果表明，在不同的辐射功率和不同暴露面下，该材料表现出不同的燃烧性能。当涂铝面(正面)暴露燃烧时，其质量损失速率(即燃烧速率)比未涂铝面(背面)小，正面的引燃时间比背面引燃时间长，这些特性对减小燃烧时的火焰蔓延速度有利；而正面暴露燃烧时的发烟量和一氧化碳的产率则比背面暴露燃烧时大，这一特性将增大材料燃烧时的烟气危害性。     

SnO2和SiO2用于PVC的阻燃消烟及协同作用

研究了二氧化锡和二氧化硅对软PVC阻燃消烟性的影响。通过对极限氧指数、剩炭率、烟密度的测定和DTATG曲线的分析证明,添加8g二氧化锡/二氧化硅复合阻燃剂的PVC的氧指数和剩炭率比未添加的分别增高5.5个单位和4.1%,烟密度降低16.4%,降解活化能分别降低38kJ/mol和23.1kJ/mol,从而证明二氧化锡/二氧化硅复合阻燃剂对于PVC是一种很好的阻燃消烟剂,二氧化锡和二氧化硅有很好的协同作用。同时证明这种复合阻燃剂能代替三氧化二锑,使产品的成本进一步降低。     

Synthesis and characterization of poly(vinyl chloride‐co‐vinyl acetate)‐graft‐poly[(meth)acrylates] by atom transfer radical polymerization

The graft polymerization of methyl methacrylate and butyl acrylate onto poly(vinyl chloride‐co‐vinyl acetate) with atom transfer radical polymerization (ATRP) was successfully carried out with copper(I) thiocyanate/N,N,N′,N′,N″‐pentamethyldiethylenetriamine and copper(I) chloride/2,2′‐bipyridine as catalysts in the solvent N,N‐dimethylformamide. For methyl methacrylate, a kinetic plot of ln([M]₀/[M]) (where [M]₀ is the initial monomer concentration and [M] is the monomer concentration) versus time for the graft polymerization was almost linear, and the molecular weight of the graft copolymer increased with increasing conversion, this being typical for ATRP. The formation of the graft polymer was confirmed with gel permeation chromatography, ¹H‐NMR, and Fourier transform infrared spectroscopy. The glass‐transition temperature of the copolymer increased with the concentration of methyl methacrylate. The graft copolymer was hydrolyzed, and its swelling capacity was measured. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 96: 183–189, 2005     

炭黑填充硬聚氯乙烯的改性

为使聚氯乙烯具有抗静电性能,采用加入具有导电性填料的方法,但加入大量的填料,会使硬聚氯乙烯的冲击性能降低,加工性能变差。本文是在以炭黑为填料的基础上,研究不同的改性剂和加工助剂改进硬聚氯乙烯的效果,结果表明,加入冲击改性剂和加工助剂后,大大增加了硬聚氯乙烯的冲击强度,且加工性能也得到改善,同时由于炭黑具有补强效果,其拉伸强度和弯曲强度在加入改性剂后也能满足使用要求。     

聚氯乙烯(PVC)共混合金──(Ⅰ)聚氯乙烯(PVC)基础知识

本讲主要介绍聚氯乙烯（PVC）的基础知识，如PVC发展史、生产情况、型号、性能、用途及改性的必要性等，使读者对PVC的基本情况有一个大概的了解。