聚酯线绳窄型联组V带的研制

简述了窄型联组V带的结构及传动特点，介绍了制造该V带时模板设计要点，各部分配方设计原则及制造工艺和有关注意问题。     

网络丝生产工艺探讨

用HEBERLEINP2 12网络喷嘴 ,在法国ICBTFTF12E3加弹机上生产不同网络度和牢度的网络丝。探讨了网络张力、压缩空气压力等工艺条件与网络度和牢度的关系 ;优化工艺参数 ,生产的网络丝满足了市场多样化的需求。     

改善聚酯装置热媒炉运行状况的几项措施

介绍了聚酯装置的热媒炉在运行过程中多次停炉的原因和存在的问题 ,比如燃料油压力波动、燃料油温度低、含水高、控制系统联锁频繁、热效率下降等 ,通过增设燃料油罐、提高油罐温度、改造增压泵、优化VR -4控制系统以及其它措施 ,大大改善了热媒炉的运行状况     

废聚酯饮料瓶裂解制备聚酯清漆

叙述了以废聚酯饮料瓶为原料,经过醇解、酯化以及缩聚等工艺过程,制成透明聚酯清漆。该法为废饮料瓶回收利用开辟了可行之路,也为聚酯清漆找到了廉价的原材料。     

高附着力丙烯酸树脂的研制

合成出一种聚酯中间体，以此中间体及其他原料制备了高附着力丙烯酸树脂，这种丙烯酸树脂配成的高附着力涂料性能优良，硬度、丰满度、附着力均得到提高?研究了影响中间体、高附着力丙烯酸树脂及其涂料制备的因素。     

家电卷材涂料用HDI改性聚酯树脂的研制

以己二异氰酸酯（HDI）改性聚酯树脂与氨基树脂配制成家电用卷材涂料。阐述了氨酯键对涂膜性能的贡献。探讨了HDI用量对涂膜性能的影响。     

不饱和聚酯树脂光固化工艺的研究-光引发剂浓度

本文选用TPO、651两种光引发剂，分别配制引发剂浓度为0．25、0．5、1、2wt％的不饱和聚酯体系。通过测定光固化试样的显微硬度分析光引发剂浓度对固化程度的影响。结果表明，提高引发剂浓度能抑制氧阻聚的作用，但对于较厚的试样，引发剂浓度过高会导致固化不完全。     

高性能环氧乙烯基酯树脂在车辆制造上的应用

介绍了几种特种环氧乙烯基酯树脂在不同类型车辆部件制造上的应用，阐述了高性能树脂基复合材料在车辆上的应用情况和发展趋势。     

Evaporative light scattering mass detection for high-performance liquid chromatographic analysis of sucrose polyester blends in cooking oils

A high-performance liquid chromatographic method is described to determine the sucrose polyester (SPE) content in seven blends of cooking oils. Four gel-permeation chromatography (GPC) columns were used in series with an evaporative light scattering mass detector to separate the SPE from the acylglycerols in the final chromatogram. The SPE fraction was collected off the GPC column and injected onto a reverse-phase C-18 column for quantitation with sucrose octaacetate as an internal standard and a gradient of nonaqueous solvents as mobile phase. The chromatograms were interference-free, with only two sharp peaks appearing. The standards were linear from 500 to 5000 μg/mL with a correlation coefficient of r=0.999. The mean percent recovery (n=9) and standard deviation were 102±6.7. The detector could detect amounts as low as 5 μg SPE.     

Optimization of the hot alkali treatment of polyester/cotton fabric with sodium hydrosulfite

The treatment of cotton or polyester fabric in alkali media is a common modification process for producing a fabric with desirable qualities. Alkali treatment of polyester/cotton fabric could produce a fabric with better performance. In this research, polyester/cotton fabric was treated with NaOH at different temperatures and times. The results show that alkali treatment at the optimum temperature and time with NaOH could hydrolyze the polyester fiber surface and remove some of the impurities from the cotton fiber at the same time and may also improve some of the fabric properties, such as fabric regain, water drop absorbency, and fabric pilling. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100:5049–5055, 2006