聚乙二醇对脂肪醇聚氧乙烯醚低温浑浊影响的研究

通过一系列低温浑浊试验考察了聚乙二醇含量与分子质量对脂肪醇聚氧乙烯醚(AEO3)低温浑浊的影响，并分析AEO3低温分层后的上清液和下层浑浊物中聚乙二醇的含量与分布，发现分子质量在600以上的聚乙二醇是影响AEO3低温浑浊的重要原因。     

纳米TiO2改性聚乙烯膜抗菌性能的研究

采用纳米粉体的分散技术和掺混技术，在聚乙烯中加入纳米TiO2制得纳米TiO2改性聚乙烯膜，并对该膜的抗菌性、抗变色性、使用安全性进行了研究。结果表明，纳米TiO2改性聚乙烯膜具有良好的抗菌性能，在不同光源条件下对不同微生物菌株的杀菌率都达到92％以上，且具有抗菌广谱、长效、安全稳定等性能。     

磷钨钼杂多酸掺杂聚苯胺催化合成丁醛乙二醇缩醛

报道了以磷钨钼杂多酸掺杂聚苯胺为催化剂,通过丁醛和乙二醇反应合成了丁醛乙二醇缩醛。系统考察了醛醇物质的量比、催化剂用量以及反应时间诸因素对产品收率的影响。确定适宜的工艺条件为n(丁醛)∶n(乙二醇)=1∶1.5,催化剂的质量为反应物料总质量的0.8%,反应时间1.0 h。在此反应条件下,丁醛乙二醇缩醛的收率可达71.1%。     

气相法聚乙烯高效催化剂的进展

综述了国内外气相法聚乙烯高效催化剂研究进展概况,以及各种新型高效催化剂制备技术和性能,并对开发我国新型高效推化剂提出了看法。     

浅析聚乙烯装置后部造粒对粒料颜色的影响

分析了气相法生产线性低密度聚乙烯(LLDPE)装置粒料颜色变黄的原因，从工艺条件、造粒设备、添加剂等几方面提出了改进措施。     

Miscibility of oligomeric poly(dimethyl siloxanes) with long-chain unbranched alkanes: 2. Unsymmetrical cloud point curves

Previously obtained cloud point curves for mixtures of oligomeric poly(dimethyl siloxanes) (weight fraction W₁) with oligomeric polyethylenes have been supplemented by the use of samples of higher molecular weight. Initial flat regions at low-medium W₁ as well as a slight shoulder at extremely high W₁ are now considered to be due to crystallization, since the temperatures at which they occur are the melting points of the oligoethylenes. The actual cloud point curves were of an unsymmetrical dome shape, the form of which could not be simulated by using a concentration-independent interaction parameter g in the Flory-Huggins equation. However, spinodals calculated by assuming a quadratic dependence of g on composition were of the same shape as the experimental cloud point curves. The critical compositions calculated on this basis were also close to the experimental ones.     

浅谈环保型助溶剂丙二醇醚的现况与应用

简要介绍了丙二醇醚国内外现状以及丙二醇醚的环保性评价和用途。     

不同螺杆组合对聚乙烯交联反应挤出的影响

从20世纪60年代到现在,在国外,反应挤出取得了相当巨大的进步,其应用相当广泛。而在国内,对于反应挤出研究得很少,最突出的表现在利用平行同向双螺杆、采用两步法的生产工艺来反应挤出聚乙烯交联料。这主要是由于影响交联质量的因素很多,如配方、生产工艺和反应挤出设备等等,而本文着重讨论挤出设备,通过对现有的挤出设备进行改进,以期得到一组最佳的螺杆组合和生产工艺条件。     

固相法低度氯化聚乙烯耐老化性能的研究

用室温对折断裂试验,研究固相法低度氯化聚乙烯老化性能,当氯含量约为7.4％时,其老化时间发生突跃,老化时间发生突跃时,氯含量与试样的氯化温度和老化温度有关.     

Stochastic defect diffusion model for relaxation effects in crystalline polyethylene

It is suggested that some relaxation processes observed in crystalline polyethylene are consequences of the diffusive motion of a particular defect called a point dislocation or twist dispiration loop along the polyethylene stems in lamellar crystals. The motion of the defect, characterized by a diffusion coefficient and a mobility, is described by solutions of the Smoluchowski diffusion equation with boundary conditions that constrain the defect to move along routes that produce experimentally observable results. The fact that passage of the defect causes both a 180° rotation of the chain and moves an extra CH₂ group in the direction of the chain axis is important to the interpretation of the data according to this model. The diffusion coefficient for a defect is estimated to be around 2 × 10^?9 cm² s^?1 at 70°C. This value is shown to be reasonable both from the viewpoint of detailed computer modelling of defect motion and contemporary ideas about scaling.