净水剂的发展和展望

详细讨论了各类净水剂的应用及局限性，提出新型净水剂的研制方向。     

Multiple morphologies of self-assembled star aggregates of amphiphilic PEO-b-PNPMA diblock copolymers in solution, synthesis and micellization

Novel amphiphilic block copolymers, poly(ethylene oxide)-b-poly(p-nitrophenyl methacrylate) (PEO-b-PNPMA) with controlled molecular weights and narrow molecular weight distribution were successively synthesized by ATRP of NPMA using PEO-Br as initiator. Self-assembling of the diblock copolymer PEO₁₁₃-b-PNPMA₂₈ in the different solvent mixtures yielded various morphologies of star micelle-like aggregates, such as spheres, vesicles, cauliflower-like aggregates and rod-like aggregates, which are determined by the nature of the common solvents and the selective solvents. Thus the critical selective solvent contents and the solvent contents in PNPMA-rich phase were measured, and they have the following order: ethanol > methanol > water, and THF > CH₃NO₂ > DMSO. The probable self-assembling mechanism is discussed. This method is convenient for preparation of multiple morphological star micelle-like aggregates in solution, especially from the amphiphilic block copolymers with relatively longer block shell.     

基于金纳米-植酸胶束混合组装的过氧化氢传感器的电化学研究

采用混合组装技术,利用植酸胶束(IP6micelles)的磷酸酯键络合辣根过氧化物酶(HRP)和金纳米粒子(GNPs),形成了具有生物亲和性的纳米复合材料,保持了辣根过氧化物酶的生物活性,并利用金纳米粒子的高电子密度、介电特性和催化性能,实现了HRP与玻碳电极(GCE)表面的直接电子转移。Nafion膜的滴加能提高电极的选择性和稳定性。实验过程中借助紫外-可见吸收光谱和透射电子显微镜进行表征,实验结果证明:GNPs的高导电和高催化性能,结合植酸胶束的优良生物相容性和对酶的高负载量的特点,使得吸附在其上的HRP保持活性,制备的生物传感器能对H2O2进行电催化还原。Nafion/HRP-IP6micelles-GNPs/GCE对H2O2的线性浓度范围为5×10-7～1.15×10-5mol/L(线性相关系数r=0.993,n=9),最低检测限为0.1μmol/L(信噪比S/N=3),米氏常数为0.002 4 mmol/L。     

聚合硫酸铁合成新工艺

以钛白粉厂副产品硫酸亚铁为原料,在常温常压下用双氧水直接氧化法合成聚合硫酸铁,对双氧水、硫酸用量等工艺条件进行了优化。结果表明:硫酸亚铁用量为55g,浓硫酸和双氧水加入量分别为3.4mL和13.50mL时,制得的聚合硫酸铁性能指标可达到一级品标准,质量稳定、可靠。产品用于去浊和染料废水脱色处理,用量少,效果好。本法具有一次性投资少、工艺简单、生产周期短、无二次污染等特点,非常适合中小型企业投资生产。     

Effectiveness test of alginate‐derived polymeric surfactants

A series of alginate‐derived polymeric surfactants (APSs) with a linear alkyl group (C8, C12, C16) was synthesized by oxidation followed by reductive amination of 2,3‐dialdehydic alginate. The products were characterized by measuring IR spectra, NMR spectra, surface tension and critical micelle concentration (cmc). They were also tested for the solubilization of azobenzene and adsorption of heavy metal. In the case of 40% CHO‐C8 APSs, the lowest interfacial tension value (31.5 m Nm^?1) was obtained at the cmc value of 1.35 g dm^?3. The dissolving capacity of 40% CHO‐C8 APS towards azobenzene was 27 times greater than that of alginate. The overall cobalt (Co²⁺) removal efficiency by adsorption using APSs was high compared with that of sodium alginate at pH 3, 5 and 7. Equilibrium aspects of cobalt adsorption onto 10% CHO‐APSs were studied, and the results show that APSs had high equilibrium capacities for cobalt uptake, 115.5 mgg^?1. © 2002 Society of Chemical Industry     

对氨基苯甲酸生产废水的树脂吸附预处理

采用超高交联吸附树脂处理芳香两性化合物对氨基苯甲酸(PABA)生产废水,通过静态吸附、动态吸附-脱附实验,研究确定了最佳的吸附-脱附工艺条件。结果表明,在常温和2 BV/h的吸附流量条件下,原废水不用调节pH值,直接经JX-101树脂吸附处理20 BV后,CODC r可从6 000 mg/L左右降至700 mg/L左右,CODC r去除率达88%以上,PABA的吸附去除率达99%以上。采用1 BV 8%氨水溶液 1 BV 4%氨水溶液 2 BV水作脱附剂,在313 K脱附温度和1 BV/h脱附流量的条件下,树脂脱附性能良好。该工艺简单,运行稳定,操作简便,可回收有用物质,有望实现工业化。     

反胶团在超临界CO_2萃取中的应用

近年来超临界流体萃取技术倍受人们青睐,超临界CO2作为有机溶剂的替代者促进了绿色工艺的发展。对于相对分子质量大的或亲水性分子及金属离子,CO2并不是一种好溶剂。采用反胶团体系可解决这一难题并开发许多新的工艺。本文概述了超临界CO2中反胶团技术的发展概况,重点阐述了反胶团在超临界CO2萃取中的应用。     

Environmentally benign precipitation copolymerization of methacrylate ester and styrene to make polymeric microspheres in supercritical carbon dioxide

The polymeric microspheres were synthesized by the precipitation copolymerization of glycidyl methacrylate (GMA) with methacrylic acid(MAA) or 2‐hydoxyethyl methacrylate (2‐HEMA) containing styrene (ST) in SC‐CO₂. Scanning electron microscopy (SEM) showed that the products were spherical microparticles, with the addition of MAA and/or 2‐HEMA as the monomer, with diameter of 0.2–2 μm. The effects of copolymerization pressure, temperature, and ratios of GMA/MAA, ST, and/or GMA/2‐HEMA, on the particle size and morphology were investigated in detail. A new experiment setup is proposed for the large amount of production, based on the rule of lower monomer concentration, more stable system, and better use of the present polymerization apparatus. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 2425–2431, 2007     

A correlation for the estimation of critical micellization concentrations and temperatures of polyols in aqueous solutions

An empirical correlation is presented for the estimation of critical micellization concentrations (CMC) and critical micellization temperatures (CMT) for poly(ethylene oxide)-block-poly(propylene oxide)-block-poly(ethylene oxide) copolymers in aqueous solutions. The CMC and CMT are expressed as a function of the polyol molecular weight, composition, and temperature (for CMC determination) or concentration (in the case of CMT). The correlation was developed from experimental CMT data for a set of 12 polyols that covered a wide range of molecular weights (2900–14600) and poly(ethylene oxide) contents (30–80 wt%) and is based on a simple expression for the standard free energy of micellization. Such a correlation should be useful to practitioners of the field as it allows easy prediction of CMC and CMT for a wide range of polyols with a minimal number of input parameters.     

Synthesis and characterization of polystyrene initiated using polymeric peroxide

Polymer peroxides were synthesized by copolymerizing tert‐butyl‐3‐isopropenylcumylperoxide (D‐120) with styrene (St). Exothermic peak at 192.7°C in DSC thermogram indicated that peroxy bonds in D‐120 remained intact during the copolymerizing process. The polymeric peroxide was used to initiate polymerization of St. GPC results showed that polystyrene (PS) initiated by the polymeric peroxides was composed of both linear and branched molecules. In addition, the rheology test showed that PS samples initiated by polymeric peroxide contained branched structure and had lower shear viscosities. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 197–202, 2006