Curing process of powdered phenol–formaldehyde resol resins and the role of water in the curing systems

The curing behavior of two kinds of commercial powdered resol phenolic resins was studied by differential scanning calorimetry. Liquid‐state ¹³C‐NMR spectroscopy was used to aid in understanding the curing behavior by detecting the structure of powdered resins. The reaction mechanism was interpreted with the dependency of activation energy on the degree of conversion. The results indicate that there are differences in the curing mechanism between core and face phenolic resins. The curing process of core resin was faster than that of face resin at the same reaction temperature. The water added in the curing system played an important role of plasticizer or diluent according to different curing stages and water content. In the initial curing stage, water mainly diluted the system and retarded the curing reactions. However, at the higher degrees of conversion, water played the role of plasticizer to decrease the effect of diffusion on the curing reactions to make the curing reactions more complete. The excess water added in the curing system played the role of diluent at almost all stages during the curing process. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 1371–1378, 2003     

Swelling kinetics of a hydrogel of poly(ethylene glycol) and poly(acrylamide‐co‐styrene)

A hydrogel incorporating the hydrophilic polymer poly(ethylene glycol) and a copolymer of acrylamide and styrene was synthesized, and the dynamics of the water‐sorption process were studied. The effects of the composition of the hydrogel and the temperature of the swelling medium were investigated with respect to the water‐sorption characteristics of the hydrogel, and the kinetic parameters, including the swelling exponent and diffusion constant, were evaluated. The hydrogel was also judged for the antithrombogenic property of its surface. The experimental findings were explained on the basis of the core–shell polymeric structure of the hydrogel. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 1419–1428, 2002     

Vitamin A microencapsulation within poly(methyl methacrylate)‐g‐polyethylenimine microspheres: Localized proton buffering effect on vitamin A stability

To stabilize vitamin A in a cosmetic/dermatological formulation, we present here a new encapsulation method based on polymer microspheres having a localized “proton‐buffering” capacity. Poly(methyl methacrylate)‐g‐polyethylenimine (PMMA‐g‐PEI) was prepared by direct condensation grafting of PEI onto poly(methyl methacrylate‐co‐methyl acrylic acid). The reaction was confirmed by FT‐IR analysis showing the amide vibration at 1,550 cm^?1. Elemental analysis indicated that the weight content of the grafted PEI was 1.6% (w/w). Vitamin A was encapsulated into PMMA‐g‐PEI microspheres by using an oil‐in‐water (O/W) single emulsion method. The presence of PEI moiety dramatically improved the chemical stability of vitamin A in microspheres. Vitamin A encapsulated within PMMA‐g‐PEI microspheres maintained 91% of its initial activity after 30‐day incubation at 40°C, while only maintaining 60% within plain PMMA microspheres. This study demonstrates that proton‐buffering within hydrophobic polymer matrix is a useful strategy for stabilizing “acid‐labile” active ingredients. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 517–522, 2004     

Poly(L‐lactide). X. Enhanced surface hydrophilicity and chain‐scission mechanisms of poly(L‐lactide) film in enzymatic,alkaline, and phosphate‐buffered solutions

Attempts were carried out to enhance the surface hydrophilicity of poly(L ‐lactide), that is, poly(L ‐lactic acid) (PLLA) film, utilizing enzymatic, alkaline, and autocatalytic hydrolyses in a proteinase K/Tris–HCL buffered solution system (37°C), in a 0.01N NaOH solution (37°C), and in a phosphate‐buffered solution (100°C), respectively. Moreover, its chain‐scission mechanisms in these different media were studied. The advancing contact‐angle (θ_a) value of the amorphous‐made PLLA film decreased monotonically with the hydrolysis time from 100° to 75° and 80° without a significant molecular weight decrease, when enzymatic and alkaline hydrolyses were continued for 60 min and 8 h, respectively. In contrast, a negligible change in the θ_a value was observed for the PLLA films even after the autocatalytic hydrolysis was continured for 16 h, when their bulk M_n decreased from 1.2 × 10⁵ to 2.2 × 10⁴ g mol^?1 or the number of hydrophilic terminal groups per unit weight increased from 1.7 × 10^?5 to 9.1 × 10^?5 mol g^?1. These findings, together with the result of gravimetry, revealed that the enzymatic and alkaline hydrolyses are powerful enough to enhance the practical surface hydrophilicity of the PLLA films because of their surface‐erosion mechanisms and that its practical surface hydrophilicity is controllable by varying the hydrolysis time. Moreover, autocatalytic hydrolysis is inappropriate to enhance the surface hydrophilicity, because of its bulk‐erosion mechanism. Alkaline hydrolysis is the best to enhance the hydrophilicity of the PLLA films without hydrolysis of the film cores, while the enzymatic hydrolysis is appropriate and inappropriate to enhance the surface hydrophilicity of bulky and thin PLLA materials, respectively, because a significant weight loss occurs before saturation of θ_a value. The changes in the weight loss and θ_a values during hydrolysis showed that exo chain scission as well as endo chain scission occurs in the presence of proteinase K, while in the alkaline and phosphate‐buffered solutions, hydrolysis proceeds via endo chain scission. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 87: 1628–1633, 2003     

Controlled radical polymerization of p-(iodomethyl)styrene—a route to branched and star-like structures

p-(Iodomethyl)styrene was polymerized under the action of a radical initiator (AIBN). The polymerization proceeds with degenerative chain transfer and leads to well defined branched polymers with functional primary and secondary iodomethyl groups as revealed by NMR studies. The obtained polymer can be further used as macroinitiator for radical polymerization of styrene. This polymerization proceeds in controlled way to polystyrene star polymers with reactive groups at the end of their arms. The characterization of branched and star structures was performed by NMR and GPC with absolute molar mass detection (MALLS).     

Effect of molecular weight on two smectic polyesters

The liquid crystalline transitions of two kinds of smectic polyesters with different molecular weights were investigated by DSC, polarized microscopy and X-ray diffraction. The molecular weight affects the transitions significantly for these two kinds of polyesters. With a high enough molecular weight, both poly (pentamethylenep,p-bibenzoate) and poly(hexamethylenep,p-bibenzoate) exhibit an enantiotropic smectic phase, but the two endothermic transition peaks of the DSC heating curve seem to overlap. The polyesters tend to exhibit a monotropic smectic phase as the molecular weight decreases. From the DSC cooling curve, the isotropic-smectic transition can be seen more clearly. As the molecular weight decreases, the smectic order decrease significantly. The molecular weight affects the transitions in a different way for these two different kinds of polyesters.     

Polyaniline‐supported acid catalyst: Esterification of cinnamic acid with alcohols

Polyaniline‐supported acid salts such as polyaniline‐hydrochloride, polyaniline‐sulfate, and polyaniline‐nitrate were prepared by oxidation of aniline using benzoyl peroxide and ammonium persulfate as oxidizing agents. Polyaniline salts were used as catalysts in the esterification of cinnamic acid with alcohols. Polyaniline‐sulfate salt was found to be the best catalyst for the esterification of cinnamic acid. The reusability, handling, and recovery of the catalyst were found to be good. The yield of the ester depended on the type of the polyaniline salt, amount of the catalyst, amount of alcohol, and both the time and the temperature of the reaction. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 96: 1584–1590, 2005     

Novel Organometallic Aromatic Azo Polyesters Based on Ferrocene

Some ferrocene containing aromatic azo polyesters were prepared by condensing 1,1-ferrocenedicarbonyl chloride with different azo groups containing aromatic diols, which were synthesized by diazotization coupling reaction from aromatic diamines. The polymeric products were separated as two portions on the basis of their solubility and subsequently characterized by their elemental analysis and FTIR spectral studies. Thermal properties of the products were measured by differential scanning calorimetry and thermogravimetry and the activation energies of pyrolysis were calculated using Horowitz and Metzger's method. The molecular weights of the soluble portions were determined by gel permeation chromatography (GPC) and these portions were also characterized by their inherent viscosities and UV-Vis spectroscopic studies.     

Study on the polymerization of ϵ‐caprolactam in the interlamellar spaces of [TEACOOH]–montmorillonite intercalations complex and its characterization

The polymerization of ?‐caprolactam between the interlamellar spaces of the [TEACOOH]–montmorillonite intercalations complex was attempted using Na–montmorillonite and 10‐carboxy‐n‐decyltriethylammonium bromide to achieve [TEACOOH]–polycaprolactam–montmorillonite, in which montmorillonite (inorganic polymer) is chemically bonded with the polycaprolactam (organic polymer). The results of X‐ray and IR analysis for the samples obtained after polymerization showed that the polymerization reaction has been successfully accomplished. For the purpose of studying the polymeric reaction product more precisely, we have isolated the polymerized product from the silicate layers and analyzed it with X‐ray diffractometer and IR spectrometer. Comparison of the results of X‐ray and IR analysis between the isolated polymer and the polymer that was synthesized by the reaction of ?‐caprolactam only with the organic cation without montmorillonite showed that both obtained polymers are the same compounds. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 1904–1910, 2003     

临界组成区域的热敏导电材料加工工艺

研究了开炼，密炼及双螺杆挤出３种不同塑炼方式及采用压制，注射，单螺杆挤出３种不同成型方法对临界组成区域的热敏导电材料电性能及力学性能的影响规律，并对开炼，密炼两种工艺的混炼条件，加料方式及加料顺序进行了考察，结果表明，采用密炼工艺，炭黑（ＣＢ）粒子能得到均匀分布，电阻率较低，拉伸强度及断裂伸长率高，适中的剪切速率及温度有利于ＣＢ粒子分散，采用压制成型法所得样品各向同性。