一种光面爆破用乳化炸药的研究与应用

针对我国隧道掘进中光面爆破采用传统乳化炸药存在装药不便及爆破效果差的问题,改变现有装药方式,生产了新型25 mm乳化炸药,研究了该乳化炸药的爆炸性能、隧道掘进装药情况及爆破效果。结果表明,新型小直径乳化炸药爆炸性能符合GB18095—2000要求,储存期6个月以上;采用新型装药方式,经现场爆破施工,开挖面平整稳定,光面爆破效果较好。     

Fabrication and Optical Properties of Periodic Ag Nano‐Pore and Nano‐Particle Arrays with Controlled Shape and Size over Macroscopic Length Scales

A facile and economical route to preparation of highly ordered sliver pore or particle arrays with controlled pore‐shape and size extended over cm² areas is described. The substrates are prepared at planar and curved surfaces via sphere‐imprinted polymer (PDMS) templating using polystyrene spheres with diameters of 820, 600, or 430 nm. Nano‐pore arrays are created by sputtering 80 nm of Ag directly onto the templates and nano‐particle arrays are prepared by electrode‐less deposition of Ag from Tollen's reagent. The shape of the nano‐pore or particles in the array conformed to that of the imprint of the sphere on the template. Stretching the flexible template enable creation of cuboid shaped nano‐voids and nano‐particles following Ag deposition. Diffuse reflectance from the spherical Ag nano‐cavity arrays showed absorbance maxima at wavelengths comparable similar to the diameter of the templating sphere, whereas reflectance from the cuboid arrays, showed little correlation with the sphere diameter. The cuboid nano‐particle arrays showed the most intense visible absorption which is red‐shifted compared to the spherical arrays. White light diffraction from the arrays, observed by rotating 1 cm² substrates relative to a fixed light source, reflected exactly the symmetry axes of the periodic nano‐features in the arrays demonstrating the remarkable macroscopic order of the periodic structures. Raman spectra of 1‐benzenethiol adsorbed at the arrays indicated SERS enhancements from the substrates are attributed mainly to surface nano‐roughness with only moderate contributions from the periodically corrugated structures. Despite excitation at the major resonance dip in the reflectance spectrum, a weak, localized rim dipole mode is found to elicit a small increase in the SERS enhancement factor for the 430 nm diameter spherical arrays. FDTD studies of nano‐void arrays provided insights into v arious factors affecting the SERS experiment and confirmed the array's plasmonic spectra are dominated by propagating plasmon modes under microscope excitation/collection angles.     

High Efficiency Poly(acrylonitrile) Electrospun Nanofiber Membranes for Airborne Nanomaterials Filtration

The potential of poly(acrylonitrile) electrospun membranes with tuneable pore size and fiber distributions were investigated for airborne fine‐particle filtration for the first time. The impact of solution concentration on final membrane properties are evaluated for the purpose of designing separation materials with higher separation efficiency. The properties of fibers and membranes are investigated systematically: the average pore distribution, as characterized by capillary flow porometry, and thermo‐mechanical properties of the mats are found to be dependent on fiber diameter and on specific electrospinning conditions. Filtration efficiency and pressure drop are calculated from measurement of penetration through the membranes using potassium chloride (KCl) aerosol particles ranging from 300 nm to 12 μm diameter. The PAN membranes exhibited separation efficiencies in the range of 73.8–99.78% and a typical quality factor 0.0224 (1 Pa^?1) for 12 wt% PAN with nanofibers having a diameter of 858 nm. Concerning air flow rate, the quality factor and filtration efficiency of the electrospun membranes at higher face velocity are much more stable than for commercial membranes. The results suggest that the structure of electrospun membranes is the best for air filtration in terms of filtration stability at high air flow rate.

     

泡沫钢的制备及压缩吸能特性

为制备高强轻质泡沫钢吸能材料,本文以430L不锈钢粉为原料、CaCl₂为造孔剂,采用粉末冶金烧结-溶解法制备了孔隙率为64%~80%,孔径1~4 mm的泡沫钢.利用SEM和XRD对试样进行微观组织结构分析,并对试样进行轴向准静态压缩测试,分析讨论了孔隙率和孔形对泡沫钢压缩变形行为和吸能特性的影响,以及变形过程中孔结构变形和坍塌机理.研究表明：泡沫钢孔结构呈近球形且分布均匀,孔之间通过孔壁上的微孔形成有效连通.在压缩变形过程中,变形区首先发生在孔形不规则且孔壁较薄处,后诱发周围孔变形并形成多个变形带.泡沫钢试样压缩屈服平台应力随着孔隙率的增加而减小,当孔隙率为64.81%~78.82%时,其对应的屈服平台应力为59.37~17.04 MPa.在孔隙率相同的条件下,孔形为近球形的泡沫试样,其屈服平台应力远高于孔形不规则的试样.当应变量为40%时,孔隙率为64.81%~78.82%的泡沫钢,其单位体积的能量吸收值为23.92~7.32 MJ/m³,约为泡沫铝的5~7倍.4种不同孔隙率泡沫钢样品的理想吸能效率(I)均达0.85以上,表明泡沫钢可以作为一种理想的吸能材料.     

小芯样检测高温后混凝土抗压强度的试验研究

主要介绍了采用直径４５ｍｍ和７０ｍｍ小芯样抗压及横劈法对高温后混凝土抗压强度进行检测的试验研究,并用数理统计的方法对得到的测强方程和回归曲线进行了定量的分析。     

基于中心距序降维的聚类算法

为提高金融业务数据集上的聚类质量和聚类效率,提出簇的直径、簇间的相似度这2个概念。利用距离尺度降维的中心距序降维法,将多维数据降至一维,在一维上利用自适应排序聚类算法ASC聚类。该算法和传统的Cobweb算法、K-means算法做对比,实验表明该方法能提高簇间相似度,最大提高200%。     

基于O型密封圈尺寸的检测方法

以机械密封中任选的一种。型密封圈为研究对象,使用高清摄像机获取其图像,采用数字图像处理技术对图像进行分析,提取出密封圈的几何特征,即密封圈的内径和外径,再使用有效的图像测量方法检测该O型密封圈的缺陷以及提取其尺寸。文章具体设计讨论了密封圈直径检测的方法,为工业上对密封圈缺陷及直径的实时检测提供了依据。以上图像的处理均在Matlab7．0的环境下实现。     

某水源地地下水四氯化碳污染特征分析

通过对某水源地地下水的四氯化碳污染调查和日常监测数据分析,研究了该水源地四氯化碳污染晕的形态和变化特征,并选取典型水源井对其四氯化碳动态特征进行了分析。在污染发现初期,污染面积为2.73 km2,最高污染浓度为249.7μg/L,随着后期污染治理工作的开展,污染面积减小到1.24 km2,最高污染浓度下降到3.62μg/L。分析认为,污染晕形态在空间分布上主要受地下水流场的控制,同时受降水量、地下水位标高及开采量等多种因素控制,污染物由北区井群向南区井群扩散。单井四氯化碳含量动态则呈现出南北区的相反特征:在北区,四氯化碳含量随着地下水位的上升而上升,并随地下水流向南扩散;在南区,四氯化碳含量随着地下水位的上升而下降,并随地下水流向地下水漏斗中心汇集。这是由于赋存于SD1井附近包气带中的四氯化碳尚未清除造成的。     

基于MoM评价模型的冠脉血管直径的测量

在骨架化提取出血管中心线的基础上,提出一种基于MoM评价模型的冠脉血管直径的跟踪测量方法。该算法利用血管的两条边缘线相对于中心线的对称性和最优化评价思想,通过对实际造影图像的量化测量并将其与实际直径值进行对比,发现使用提出的算法能够准确地测量血管的直径,并且可以有效地解决血管分支和重叠处直径测量问题。