绥高#2线线路保护2动作分析

对高岭站2009年6月15日绥高#2线线路保护动作的原因进行深入分析,介绍处理措施。     

Turbulent Details Simulation for SPH Fluids via Vorticity Refinement

A major issue in smoothed particle hydrodynamics (SPH) approaches is the numerical dissipation during the projection process, especially under coarse discretizations. High‐frequency details, such as turbulence and vortices, are smoothed out, leading to unrealistic results. To address this issue, we introduce a vorticity refinement (VR) solver for SPH fluids with negligible computational overhead. In this method, the numerical dissipation of the vorticity field is recovered by the difference between the theoretical and the actual vorticity, so as to enhance turbulence details. Instead of solving the Biot‐Savart integrals, a stream function, which is easier and more efficient to solve, is used to relate the vorticity field to the velocity field. We obtain turbulence effects of different intensity levels by changing an adjustable parameter. Since the vorticity field is enhanced according to the curl field, our method can not only amplify existing vortices, but also capture additional turbulence. Our VR solver is straightforward to implement and can be easily integrated into existing SPH methods.     

Authority updating: An expert authority evaluation algorithm considering post‐evaluation and power indices in social networks

In group assessment, the focus is on finding high‐authority experts to improve the reliability of assessment results. In this study, we propose an authority updating algorithm while considering the power and judgement reliability of an expert on the basis of social networks and post‐evaluations. A network power index is established and used to reflect the power of an expert while considering social networks. The measurement of the judgement reliability of an expert considers the post‐evaluation of the objects selected by experts, thereby more scientifically reflecting the reliability of experts. The analysis shows the following: although the social‐network structure influences the authority of experts, the influence weakens when the assessment group is a highly or even fully connected group; the network effect may increase the authority of some experts and reduce that of others, and it will weaken as the network connectivity increases; moreover, the judgement reliability and authority of an expert while considering post‐evaluation can encourage him/her to make fair assessments and strive to reduce his/her motivation and cognitive biases.     

乳化液泵站变频调速系统的设计

针对传统的乳化液泵站调速系统存在机械损耗比较大的问题,提出了一种乳化液泵站变频调速系统的设计方案;给出了该系统的硬件结构,详细介绍了该系统的工作模式及软件设计。实际应用表明,该系统运行稳定、机械损耗小。     

基于D-FNN的混沌铁磁谐振系统非线性补偿控制方法

针对电网混沌铁磁谐振系统产生的混沌现象,提出基于动态模糊神经网络的混沌铁磁谐振系统非线性补偿控制方法。该方法采用动态模糊神经网络来逼近系统的非线性部分,消除了过电压的混沌现象,将系统稳定到目标位置,实现了对系统的非线性补偿控制。Matlab仿真结果表明,基于动态模糊神经网络的非线性补偿控制方法控制结果正确,响应快速。     

矿用隔爆兼本质安全型不间断直流稳压电源的设计

基于本质安全型电源的原理及特点,提出了一种矿用隔爆兼本质安全型不间断直流稳压电源的设计方案,详细介绍了该电源主要电路的设计。该电源采用LM317可调稳压芯片实现稳压功能,具有使用方便、电路简单、变换效率高、成本低等优点。测试结果表明,该电源达到了本安标准,满足了安全型电气设备的需求。     

可变频变压器的建模仿真与分析

采用高压直流输电方式连接两个异步电网存在谐波干扰、换相失败、难以实现功率平滑调节、无功功率不能随有功功率传输等问题。文章介绍了可变频变压器的的基本结构及原理,研究了可变频变压器的数学模型及控制模型,给出了可变频变压器传输功率与直流驱动电动机提供的驱动转矩之间的数学关系式,在此基础上采用PSCAD软件搭建了可变频变压器模型并进行了仿真研究。仿真结果表明,可变频变压器可以实现两个异步电网之间的连接并进行功率双向平滑传输,响应速度快;通过转速控制器控制直流驱动电动机的转速可使旋转变压器的转速恒定,以弥补两个电网的频差,维持系统平衡。     

紧凑型边界扫描技术的功能与现状

芯片一体化进程的加剧以及对功耗控制的关注日益增加,边界扫描技术面临新的挑战,这些挑战来源于调试、应用、测试等方面,紧凑型边界扫描技术对此提出了有效的解决方法;以IEEE1149.7标准以及国内外文献报道为依据,对精简引脚与增强功能边界扫描技术的测试规范进行系统的分析,重点对该技术的新功能、新特性和新应用进行详细介绍;针对符合IEEE1149.1标准的测试系统与被测系统如何升级以实现IEEE1149.7标准新功能的问题提出了相应的建议;最后总结了该技术的发展方向和应用前景。     

STM32F207和DM9161A的以太网实现方案

电力抄表系统常通过网络采集和传输电网中的谐波等信息。本文提出了一种适合电力系统的网络设计方案。在STM32F207和DM9161A为核心的硬件平台上,完成了LwIP协议栈的移植,实现了远程终端和上位机通信。使电力系统更具实时性与交互性,并保证了通信的可靠性。     

Influence of base resistance on extracting thermal resistance for SiGe HBTs

In this article, the influence of base resistance on extracting thermal resistance for SiGe heterojunction bipolar transistors is studied and an improved approach for determining the junction temperature and thermal resistance is presented. The proposed method for extracting thermal resistance is based on the temperature sensitivity of the base–emitter (B–E) voltage when the device is biased with a fixed emitter current density. This approach not only takes into account the self‐heating during the different ambient temperature measurement but also revises the empirical equation of B–E voltage due to the influence of base resistance during the power dissipation increment measurement. Results are obtained for devices with different emitter lengths and fingers. Compared with the conventional method, the thermal resistance is about up to 15% improvement for the device with 0.3 × 1.9 μm² emitter area and 13.8% for the device with 0.3 × 13.9 μm² emitter area. The accurate thermal resistance implemented in HICUM model has resulted in better fit for transistor output characteristics. © 2012 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2012.