TOP开关电源的设计与制作

利用TOP开关器件设计了一种高精度，输出电压可调的开关电源，并介绍了制作方法。     

通信用VRLA蓄电池可靠性指标及计算探讨

在说明通信局（站）电源系统对VRLA蓄电池组可靠性要求的基础上，阐述了为了达到电信设备的电压、电流需求，通过串联或串并联构成电池组的单体VRLA蓄电池应达到的可靠性指标。在确定单体VRLA蓄电池应达到的可靠性指标。在确定单体VRLA蓄电池可靠性参数时，可通过现场使用调查或加速寿命试验的办法来求得。在单体VRLA蓄电池可靠性指标过低的情况下，可通过多种冗余连接方式来提高电池组的可靠性。     

二滩水电站地下厂房洞室的施工特点

国际承包商在二滩工程中的许多施工布置和方法，施工技术和工艺、施工设备和措施很具有特色，扩展了我们的视野、丰富的我们的思路。总结其经验，可作为国内类似工程的参考。     

太阳能热风发电技术研究进展

介绍了太阳能热风发电的产生背景、技术原理和特点。太阳能热风发电能够实现由太阳能到空气动能,最终到电能的转变,具有环保无污染、运行维护简单、缓解常规能源消耗等特点。简要介绍世界上第1座试验性质的太阳能热风发电站。对太阳能热风发电技术相关研究历程从试验研究和理论研究2个方面做了综述,重点介绍了澳大利亚电站的建设进展及最新相关学术研究进展,包括过渡段理论及试验研究、系统数值模拟和太阳能热风发电技术在高山地区的应用等。介绍我国太阳能资源情况,指出我国太阳能资源丰富,适合建造大型太阳能热风发电站。     

A novel robust current control approach using adaptive line enhancer for three‐phase current‐source active power filter

An effective system control method is presented for applying a three‐phase current‐source PWM converter with a deadbeat controller to active power filters (APFs). In the shunt‐type configuration, the APF is controlled such that the current drawn by the APF from the utility is equal to the current harmonics and reactive current required for the load. To attain the time‐optimal response of the APF supply current, a two‐dimensional deadbeat control scheme is applied to APF current control. Furthermore, in order to cancel both the delay in the two‐dimensional deadbeat control scheme and the delay in DSP control strategy, an Adaptive Line Enhancer (ALE) is introduced in order to predict the desired value three sampling periods ahead. ALE has another function of bringing robustness to the deadbeat control system. Due to the ALE, settling time is made short in a transient state. On the other hand, total harmonic distortion (THD) of source currents can be minimized compared to the case where ideal identification of the controlled system can be made. The experimental results obtained from the DSP‐based APF are also reported. The compensating ability of this APF is very high in accuracy and responsiveness although the modulation frequency is rather low. © 2004 Wiley Periodicals, Inc. Electr Eng Jpn, 150(1): 50–61, 2005; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20014     

Analysis and Optimization Laminar Viscous Flow Through a Channel

Optimizing of laminar viscous flow through a pipe by two dimensionless values is investigated analytically. Dimensionless entropy generation and pumping power to heat transfer rate ratio are used as basis for constant viscous and the temperature dependence on the viscosity. For this matter we calculate entropy generation and pumping power for a fully developed in a pipe subjected to constant wall temperature for either constant viscosity and the variable viscosity. The variation entropy generation increase along the pipe length for viscous fluid is drawn, either the variation summation dimensionless entropy generation and the pumping power to heat transfer rate ratio are varying the fluid inlet temperature for fixed pipe length and are varying pipe length for fixed fluid inlet temperature are drawn. For low heat transfer conditions the entropy generation due to viscosity friction becomes dominant and the dependence of viscosity with the temperature becomes essentially important to be considered.     

船艇电站仿真与综合管理系统

论文介绍了船艇电站模拟器的组成和实时仿真功能,着重描述了多层次的图形管理系统及其仿真界面。课题将多媒体课件制作与模拟器有机地结合,涵盖了船舶主要电气设备的控制电路,既利于实践训练又便于原理的讲解,并在实践中取得了良好的效果。     

Characterization of the flow behaviour of sausage emulsions with a simple tube viscometer

A specially designed tube viscometer was used to measure apparent viscosity during flow of Bologna type sausage emulsions moving through a pipe. Emulsions varied in fat content (from 21.8 to 44.3%) and in moisture/protein ratio (from 3.7 to 5.6), and the effects of added sodium chloride, sodium diphosphate, starch and blood plasma were investigated in a 36% fat, 3.7 moisture/protein emulsion.
The shear stresses determined as a function of shear rate were fitted by a power law. Yield stress of the emulsions was negligible relative to the applied stress. However, inspection of the flow profiles indicated that considerable slip of the sausage emulsion occurred at the pipe wall. Both emulsion flow and slip contribute to overall flow behaviour, so a kind of effective viscosity is determined. Intrinsic rheological properties and wall slip will both be affected by the composition of the sausage emulsion.     

白丰梯级水库实用电力优化调度图的研制——变动目标水位控制法的研究

在分步设计及大量计算的基础上，提出了一套考虑因素相对全面、指导 性强、易于操作的梯级水库电力实用优化调度图。该调度图继承了传统时历法调度图直观、 简明的优点，又具有其特有的优化功能。该方法以汛末蓄满水库为标准，确定典型来水过程 的预调度线和初始目标；以获得梯级电站最大长期调峰收益为目标，以变动目标水位控制为 核心，开发出调度图长系列操作通用程序模块，并以此模块作为寻优计算的手段。提出了水 库长期运行与短期实时调度有机结合，以及模拟计算、水位偏差最优反馈、来水预报、目标 水位寻优等多种实用处理技术。     

Modeling of a power electronic converter for EMC in the conduction emission frequency band

With the advancement of high‐frequency switching devices, electromagnetic interferences (EMI) have become problems in power electronic converter designs. It is necessary for an electromagnetic compatibility (EMC) design to prospect and consider its possible EMI levels. This paper describes how to compute effects from a power converter to an object point to reduce conduction EMI noises effectively by an appropriate design. Modeling techniques for converter elements are discussed for a model in the conduction emission frequency band by the parameter tuning method and for line constants by an analytical derivation. Then a derived model is simulated for harmonic distributions of loop currents and their magnetic fields. © 2002 Scripta Technica, Electr Eng Jpn, 139(1): 44–50, 2002: DOI 10.1002/eej.1145