基于本地缓存的弹性分组环保护机制

本文提出一种基于本地缓存的弹性分组环保护倒换机制(WrapProtectionBasedOnLocalBuffers,简称WP-LB)。其主要思想是当环路上任何位于源节点和故障区域之间的中间节点接收到含有故障信息的控制信令后,就不再向下游转发数据分组,而是在本地缓存这些数据。等到保护通路建立好之后,再把缓存的数据分组经过保护通路发送给目的节点。分析计算表明,与原有的保护倒换(WrapProtection,简称WP)机制相比,WP-LB机制不仅提高带宽利用率,减少平均时延,并且还能避免数据包的丢失和失序。     

Effect of Organic Additives on Electrochemical Surface Precipitation and Polymorphism of CaCO3

The inhibition effect of three organic additives on the precipitation and polymorphism of CaCO₃ deposited on gold surfaces was investigated using electrochemical and microscopic techniques. Additives, two polyacrylic acid (PAA) polymers with different molecular weights (Mw 2100, Mw 30,000), and 1,2,4,5‐benzenetetracarboxylic acid (BTCA), were either added to the solution before or during deposition. In the presence of 100 ppm of one of the three additives in solution, almost no scale was observed on the surface for at least 24 hours. In the presence of lower concentrations of PAA Mw 2100, only distorted calcite crystals were obtained while with PAA Mw 30,000 the polymorph was spherical vaterite. A mixture of calcite and vaterite was observed with the BTCA additive. Addition of the polymers inhibits further nucleation and growth even if added after partial deposition of CaCO₃ while BTCA has no effect once nucleation has started. The results indicate that the inhibit ion effect of the PAA polymers is due to adsorption on the electrode surface while the effect of BTCA is related to chelation of calcium ions in solution.     

新型环保钢制散热器的研制与应用

介绍了新型环保钢制散热器的设计、结构特点及主要制造工艺和性能特点。通过实际运行 ,证明该新型环保钢制散热器在室内供暖方面具有广泛的应用推广价值     

尖晶石型软磁铁氧体纳米材料的制备研究进展

介绍了软磁铁氧体纳米材料的特性,综述了近年来具有尖晶石结构的软磁铁氧体纳米材料的制备方法。其中包括:化学共沉淀法,水热法,溶胶-凝胶法,喷雾热解法,微乳液法,相转化法,超临界法,冲击波合成法,微波场下湿法合成,爆炸法,高能球磨法,自蔓延高温合成法等。详细介绍了各种制备方法的特点,研究进展及其发展趋势。     

太平湾电站二期防护提工程施工中几个问题的处理

针对防护堤的设计和施工,分析了设计原则和施工中遇到的问题,阐述了在施工中遇到的问题的解决方案。     

Research and application of automatic control system of argon blowing at ladle shroud

Argon blowing at the ladle shroud requires the best flow control strategy to effectively avoid the secondary oxidation of molten steel, slag entrapment and heat loss during the casting of the tundish, and at the same time, give full play to the role of bubbles to remove inclusions. Therefore, an automatic control system for argon blowing at the ladle shroud was proposed. The data collected by S7-300PLC and software programming were used to adjust the argon blowing flow online in real time according to factors such as pouring and continuous pouring. On this basis, PID control algorithm and closed loop control mechanism were used for real time adjustment. The flow control valve ensures theminimum deviation between the actual value of the flow and the set value. The production data of this system in the first quarter of 2021 in a special steel plant show that the proportion of furnaces with an acid soluble aluminum (Als) loss percentage of less than 10% of each steel grade has increased by 5.52%, and the proportion of furnaces with an Als loss percentage of more than 60% has increased from 1% decrease to 0. The actual application results show that the use of the system improves the surface quality of the continuous casting slab and the performance of the final product.     

The Challenge of the Market

Identifying markets for new or improved products for minor crops threatened with extinction is one critical component of any strategy intended to enhance prospects for sustainable production and use. Typically, however, activities linked to the sustainability of these commodities avoid addressing questions associated with assessing their commercial potential. After a brief review of this avoidance syndrome, this article presents a sample of practical, low-cost procedures to help evaluate the market prospects and procedures for crops like quinoa, while citing references to other methodological materials covering similar topics.     

A semiparametric model for compositional data analysis in presence of covariates on the simplex

Compositional data occur as natural realizations of multivariate observations comprising element proportions of some whole quantity. Such observations predominate in disciplines like geology, biology, ecology, economics and chemistry. Due to unit sum constraint on compositional data, specialized statistical methods are required for analyzing these data. Dirichlet distributions were originally used to study compositional data even though this family of distribution is not appropriate (see Aitchison, 1986) because of their extreme independence properties. Aitchison (1982) endeavored to provide a viable alternative to existing methods by employing Logistic Normal distribution to analyze such constrained data. However this family does not include the Dirichlet class and is therefore unable to address the issue of extreme independence. In this paper generalized Liouville family is investigated to model compositional data which includes covariates. This class permits distributions that admit negative or mixed correlation and also contains non-Dirichlet distributions with non-positive correlation and overcomes deficits in the Dirichlet class. Semiparametric Bayesian methods are proposed to estimate the probability density. Predictive distributions are used to assess performance of the model. The methods are illustrated on a real data set.     

活性炭的制备及应用新进展

综述了活性炭材料研究开发的新进展。重点介绍了煤、石油焦、沥青基活性炭的制备方法及针对不同用途的活性炭改性技术，为选择合适的活化方法和制备特殊功能的改性活性炭提供了参考。     

Interface Management within Construction: In Particular, Building Facade

This paper discusses the need for interface management within construction, with particular reference to building facade interfaces. It categorizes the three different types of interface management—physical, contractual, and organizational. The implication of interface management in construction contracting is discussed; it is explained how the U.K. procurement trends have changed, affecting the interface management within projects. U.K. cladding procurement is very fragmented, and the paper maps the development of a typical cladding system showing the complexities of interface management. Finally, the paper discusses CladdISS, a U.K. government funded research project to develop a standardized strategy for the design and management of window and cladding interfaces. It explains the principles of CladdISS with reference to process maps, action plans, management strategy, bibliography, advice on standards, materials, maintenance, joints, movement, and tolerances. This will enable strategies to be developed to avoid the endemic interface problems occurring on-site. It will also guide the management of the interfaces throughout the project.